How do I identify my Seth Thomas Clock?
- Look for the remains of a label or the full paper label on the clock on its back, bottom or inside.
- Study the pendulum inside the clock to determine if it has an etching on it.
- Turn over the clock carefully and look for a metal plate that identifies the clock as a Seth Thomas clock.
How can you date a Seth Thomas Clock?
Look for the remains of a label or the full paper label on the clock on its back, bottom or inside. ... Study the pendulum inside the clock to determine if it has an etching on it. ... Turn over the clock carefully and look for a metal plate that identifies the clock as a Seth Thomas clock.More items...
How do I know if my clock is valuable?
Check the face, mechanism and case. Clocks that are labeled or stamped with the name of its maker or a trademark are more desirable than unmarked clocks. If you can't find a label or a stamp, you'll need to identify the type of clock yourself.
What does the S and F mean on Seth Thomas Clock?
There is usually a small F (Faster) and S (Slower) printed on either side of the dial.
How do I know what my clock is?
The name may be:Engraved or printed near the center face of the dial.Engraved or printed around the edge of the dial's face and may be covered by the bezel.Stamped or engraved on the clock movement's backplate.A paper label pasted on the back of the clock.A paper label pasted to the inside of the clock case.
How old does a clock have to be to be an antique?
The search for an antique clock can seem long and expensive, however there is more to antique clocks than price tags and rare designs. For a timepiece to qualify as an antique clock it must be at least 100 years old, on the other hand, if a clock is younger than 100 years old it is considered vintage.
What should I look for in an antique clock?
Often the authenticity of an antique clock can be confirmed by the presence of a clockmaker's trademark or insignia that is inscribed on the clock's movement. Without such markings or an associated label, a clock that is merely attributed to a specific maker will most likely be valued less.
What are the three holes on a Seth Thomas Clock?
On a clock with three arbours, the centre arbour winds the time train and the left arbour, the strike side and the right, the chime side. On some clocks, there is a smaller hole on the clock face near or above the 12 o'clock position. It is also an arbour but a smaller one used for regulating the speed of your clock.
How old are Seth Thomas clocks?
Information and History and Heritage of Seth Thomas As the longest established clock maker in the United States (nearly 200 years), Seth Thomas is recognized as one of the most respected brands of clocks in the world.
What are the 3 holes on a wind up clock?
In clocks with more than one keyhole, the left-most hole usually controls the hourly chime, and in clocks with three keyholes, the center keyhole is typically for the quarter-hour chime, although again this can vary from model to model.
How do you date an old clock?
Signatures on an antique clocks dial or movement can sometimes help to date a clock. Providing you can find the clock makers name and the date of activity listed in one of the many guides accessible to watch and clockmakers. However, a signature may refer to someone other than the clockmaker.
Is the Seth Thomas Clock Company still in business?
Seth Thomas Clocks In January of 2009 The Seth Thomas company closed and is no longer in operations. No parts or specific information is available to us to share. If you need parts for a Seth Thomas Clock, try Timesavers.com as they have many generic clock parts that might work for you.
How do you date a clock bracket?
Date adjustment Some bracket clocks have a date indicator. Those with a date aperture can be adjusted quite easily. Every 2 revolutions of the hour hand (24 hours) at or near 12, a little arm in the movement will make contact with the date ring behind the dial.
What wood was used for Thomas Mantel clocks?
By 1830, the frame of an Thomas mantel clocks was often constructed in a deep, rich, dark mahogany wood.
What to do if you don't find a clock plate?
If you do not find a plate on the bottom, open up the clock and look inside. Sometimes Thomas etched a metal plate with his name. If the clock had a patent, he included the patent number and his trademark on the metal plate as well. Inspect the clock face; sometimes Seth Thomas added his name to the clock's dial, ...
When did Seth Thomas go out of business?
Seth Thomas died in 1859, after which his son ran the company under his name. The company continued making clocks until 1980 when it went out of business.
Who added his name to the clock?
Inspect the clock face; sometimes Seth Thomas added his name to the clock's dial, usually centered just above the number 6 on the dial. Clocks built through 1879 had no name on the dial, but during the years 1881 to 1888; 1913 through 1929; and 1929 forward, his name often appeared on the dial.
