Ford Jubilee & NAA 1952-1954. The serial number on the first 22,238 NAAs made was on the left side of the engine block, just below the head. On later models the serial number was on the left side of the transmission housing, just behind where the starter is. Additionally, is a Ford Jubilee a good tractor?
Is a Ford Jubilee a good tractor?
Additionally, is a Ford Jubilee a good tractor? While the Jubilee is not as full-featured as a modern tractor, it has enough bells and whistles to accomplish all sorts of chores on a small farm. These tractors are very reliable but any tractor this old will need replacement parts every now and then.
How do I find out what year my Ford tractor is?
The easiest way to identify the year of your old Ford tractor is by the serial number. However, sometimes the number is unreadable due to some damage or the engine/transmission has been swapped from another tractor. Hybrids (8N tractors with 9N engines or 9N tractors with 8N engines, etc) are not uncommon.
When did Ford change the Stars on tractors to diamonds?
The stars changed to diamonds in 1951 when the engines went to thick-wall cast iron sleeves rather than steel sleeves used previously. The new model NAA tractors built starting in 1952, for the 1953 model year, got a special "Golden Jublee" hood medallion to celebrate Ford's 50th anniversary.
Why do Ford tractors have single letter designations?
At the time these tractors were designed, Ford Motor Company was using single letter designations for each new development project. Successful projects that made it to production such as the Model "A" and Model "T" are very well known. Many projects never made it to production.
What year is my Ford Jubilee tractor?
The Ford NAA tractor (also known as the Ford NAA) is a tractor that was introduced by Ford as an entirely new model in 1953 and dubbed the Golden Jubilee....Ford NAA tractor1953 Ford Golden JubileeOverviewManufacturerFordProduction1952–195413 more rows
Where is the serial number on a Ford Golden Jubilee?
The serial number is located on the left hand side of the engine block, just below the head. The 8N switched from the front mount distributor to the side mount distributor in 1950 at serial number 263843. Ford Jubilee & NAA 1952-1954.
How do I know what Ford tractor I have?
The hundred series and "01" series tractor serial number location is on the flat area above and behind the starter. The first number is the model number. Below that is the serial number. A diamond symbol denotes the beginning and end of the serial number.
What is the difference between a Ford 8N and a Jubilee?
The Jubilee bears a strong resemblance to its predecessor, the Ford 8N, but has many new and improved features. The classic flathead engine of the Ford 8N was replaced with a powerful overhead valve engine. The 32 horsepower, 134 cubic inch engine was so popular it even has its own nickname - The Red Tiger.
How much is a Ford Golden Jubilee tractor worth?
The preauction estimate is $5,000-$7,000 which is not unreasonable. While Golden Jubilee NAA's aren't difficult to find they are popular with collectors and in like-new condition can command premium prices.
How do you tell the year of a tractor serial number?
When you want to identify the year of your tractor, you can look at several things. First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing. Use the tractor serial number table to look up the year.
When did Ford tractors change from red to blue?
The History of Blue Ford Tractors The antique blue Ford Tractor that we know, and love did not become Ford blue until 1964 [3]. Ford would grow and acquire New Holland in 1986 [4].
What is the difference between an 8N and a 9N Ford tractor?
The most noticeable differences between the 8N and its predecessors was the inclusion of a 4-speed transmission instead of a 3-speed in the 9N and 2N, and an increase in both PTO and drawbar horsepower. The other big change on the 8N was the addition of a 'Position-control' setting for the hydraulics.
What years were Ford 2000 tractors made?
The Ford 2000 tractor was originally produced between 1962 and 1965 out of Highland Park, Michigan. When sourcing parts, keep in mind that the four-cylinder Ford 2000 was very similar to the 601 Workmaster Series put out by the same company.
What horsepower is a Ford Jubilee tractor?
Ford Golden Jubilee NAAFord NAA PowerDrawbar (claimed):20.2 hp 15.1 kWPTO (claimed):30.15 hp 22.5 kWPlows:2* Use of three 14-inch was commonDrawbar (tested):26.8 hp 20.0 kW2 more rows•May 2, 2022
What color was the Ford Jubilee?
The hexadecimal color code #c7b992 is a medium light shade of yellow.
Does a Ford NAA tractor have live PTO?
The two year old NAA showed an improvement over the 8N with more horsepower and a Sherman Over/Under transmission that provided twelve forward speeds and three reverse speeds. It was also equipped with the live PTO option.
What year was the Ford tractor called the Golden Jubilee?
In late '52 Ford introduced the all new, completely redesigned NAA series tractor for '53 which marked the end of 8N production and started a new chapter in Ford tractor history. 1953 was Ford's 50th anniversary, so the new tractor was called the Golden Jubilee in celebration of that event.
How to identify a tractor?
The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter.
What color was the hood on a Ford 9N?
The 9N (and later 2N) tractors were painted all gray. Because the steel stamping dies were not ready yet when the tractor started production, the first 600-700 9N tractors had a cast aluminum hood. Although they were painted gray from the factory, the rarity of these aluminum hoods has caused many of their current owners to polish the aluminum to a bright shine and leave it unpainted to show off the rare hood. Who can blame them? The horizontal spoked grille was also cast aluminum as were the complete steering column and dash assembly, shifter base, transmission side covers, engine timing cover, and a few other pieces. The aluminum battery/fuel cover was not hinged but was held in place with spring clips.
What is the serial number of a 2N tractor?
There are no 2N serial numbers; all 2N tractors retained the 9N serial numbers. The exception to the 9N or 8N format is the 9NAN and 8NAN prefix which identifies a kerosene burning tractor. These are common in Europe, but extremely rare in the US.
What year did Ford introduce the Selecto-O-Speed transmission?
1959 was the year for the introduction of Ford's revolutionary new Select-O-Speed transmission. The Select-O-Speed gives you a wide range of ratios with 10 speeds forward and 2 reverse all done with the use of hydraulic clutch packs, bands and planetary gears. It allows shifting up or down on the fly with no clutch. Ford Tractor launched one of their biggest advertising campaigns ever to pump up sales of the new Select-O-Speeds and required every Ford Tractor dealer to have at least one Select-O-Speed demonstrator tractor (painted gold) on hand as a sales tool. Unfortunately, the release of the Select-O-Speed occurred before all the bugs were worked out of the transmission and it soon developed a bad reputation as being troublesome and unreliable. Ford backed the transmissions 100% under warranty and within a year or so had the bugs worked out and the Select-O-Speed evolved into an excellent transmission. However, bad reputations are hard to turn around and the Selecto-O-Speed has kept it's stigma to this day, partially because they are expensive to repair and very few people know how to work on them. The surviving Gold Demonstrator tractors are very collectible today.
How many slots does the Ford 8N have?
The grille was changed to have four slots in the center bar. This would be the last change to the grille until the introduction of the 8N. The steering wheel was changed to a hard rubber outside with 3 uncovered steel spokes in the center. This basic design was kept and used on all Ford tractors through 1964.
What year was the Ford 8N?
The model 8N tractor was the result of the first major redesign since 1939. It was all Ford designed, since Harry Ferguson had gone his own way and was no longer involved. Production of the 1948 (8N) model began in July 1947. Although it still looked basically the same as the 9N-2N, it had many improvements. The paint colors were changed to a bright red with lighter gray sheet metal, which earned it the nickname "redbelly". The bolt circle of the wheel lug nuts was much smaller than the 9N's and 2N's. Horsepower went up due to an increase in compression ratio from 6.1 to 6.5. The new transmission was a 4 speed with all helical cut gears. Position control, a much needed feature on the 3 point lift, was added to the hydraulic system. A small lever on the right side under the seat switched the system between position and draft control. The brake system was improved and made easier to service by the addition of removable drums. Both brake pedals were now next to each other on the right side. Steering gears were changed to a ball nut and sector shaft type for easier steering and backlash adjustment. Running boards were added. The hood had a screened air intake on the right rear side and the Ford script was embossed into the hood sides. The steering wheel was higher than the 9N-2N models.
How to identify a Ford tractor?
How Do You Identify Ford Tractors? Ford tractors can be identified by the serial number that has either been stamped behind the oil filter on the engine block's left side, on the left side of the transmission case, or behind the starter, depending on the tractor's model.
What is the red emblem on a 1953 Ford tractor?
Ford's NAA series was taller than previous models. These tractors featured a red emblem in the center of hood. The 1953 models said, "Golden Jubilee Model" around the rim, and 1954 models replaced the lettering with small crosses.
What year did the NAA tractor get the gold jublee?
Ford NAA. The new model NAA tractors built starting in 1952, for the 1953 model year, got a special "Golden Jublee" hood medallion to celebrate Ford's 50th anniversary. The big change for this model was the new overhead valve "Red Tiger" engine.
When did Ford start using model numbers?
Starting with the Hundred series in 1954, Ford began using a model number prefix to indicate options such as engine size and transmission type. If you have your model and serial numbers written down, GoTo Decode Table.
Why did Ford 9N have aluminum hood?
A cast aluminum hood was used because the stamped steel hood could not be manufactured in time.
What year did Ford introduce the thousand series?
In 1962 Ford introduced the thousand series utility tractors. The hood/grille was changed doing away with the round "cyclops" hood emblem. The paint scheme for utility tractors was changed to the new corporate blue and light-gray colors. A few industrial models were red and buff color. Model and Serial numbers are stamped on left/front/top corner of the transmission housing.
When were Ford thousand series tractors made?
Ford Thousand Series - Early Models. A few thousand series tractors were built as light and heavy industrial models beginning late in 1960. The light industrial models were very similar in appearance to the '01 series. Model and serial numbers were stamped on the left/front/top of the transmission housing.
Where is the serial number on a Ford 8N?
Ford engineers were busy working on the new 8N tractor design. Serial numbers were stamped on the upper/left/rear corner of the engine block above the starter. All numbers start and end with a star and still have the prefix "9N" to indicate 1939 model. Built from 1942 to 1947.
Who invented the Ford 2N?
Ford 2N. Mr. Roger Kyes (president of the Ferguson-Sherman Corporation) came up with the idea of producing a tractor without rubber tires, battery, or starter. The Model 2N was born but production of the stripped-down tractors did not start until October 1942.
