How do I connect to my UD devices?
- On one of UD's campuses, go to the Wi-Fi settings on your internet-capable device (phone, tablet, computer) and select Get Started at UD:
- Open a web browser.
- Click JoinNow.
- Follow the on-screen prompts to register and configure your internet-capable device for use with the eduroam Wi-Fi network at UD.
...
Directions
- Chromecast tablets, Apple TVs, and Wi-Fi printers need to be set up as shared devices. ...
- If you are registering a shared device, like a wireless printer or an AirPlay device, click Connecting a Shared Device below.
How do I set up UD devices as the network?
On your device, go to Wi-Fi settings and choose UD Devices as the network. You can only do this step after you have completed the preceding steps. AirGroup: If you are not sharing your device, make sure the box next to Enable AirGroup is not checked.
How do I make a local connection on UD mobile?
Local connection on UD Mobile can be achieved in 2 scenarios. Credentials for local connections are under Advanced-Settings in the Systems Screen. First is using a local connection along with a remote connection.
How do I connect to UD's wireless access point?
Article - Connecting to UD's Wireless... Set up your wireless devices (including laptops) by running the EduRoam Setup Wizard from each device while on campus. You'll be prompted to install the Secure W2 agent on your device and return to the setup wizard to complete the configuration process.
How do I add a new device to my udelnet account?
Your username is your UDelnet ID (no "@udel.edu"). On the Manage Devices page, click the Create Device link on the left. In the first textbox on the device registration page, type an appropriate, descriptive device name, like "ABC_Redding_Printer" for a printer in room ABC of Redding Hall.
How do I connect to UD Internet?
General directionsOn one of UD's campuses, go to the Wi-Fi settings on your Internet-capable device (phone, tablet, computer) and select Get Started at UD.Open a web browser, and type this URL into your device's web browser: wifi.udel.edu.Jul 8, 2019
How do students connect to UD Wi-Fi?
Android/ChromeOSMake sure your wifi is turned on and open up the wifi networks. Tap on eduroam to connect.Enter your CatID username in the Identity field followed by @uni.edu. Example: tcpanther@uni.edu. Scroll down to the password field, enter your passphrase, and choose Connect.
How do I connect to eduroam UD?
Connect to eduroam (Android)On your Android device, go to Settings, then tap Wireless & networks, then Wi-Fi settings.Tap eduroam.Make sure that for EAP method, PEAP is selected.Tap Phase 2 authentication, and then select MSCHAPV2.Enter:Tap Connect.More items...•Jun 5, 2020
How do I connect my devices to the Internet?
2:084:00Computer Basics: Connecting to the Internet - YouTubeYouTubeStart of suggested clipEnd of suggested clipIdea is that you'll connect the modem to your phone jack or cable tv connection. And then connectMoreIdea is that you'll connect the modem to your phone jack or cable tv connection. And then connect your computer to the modem. Using an ethernet cable.
How do I add a device to my UD Wi-Fi?
On your device, go to Wi-Fi settings and choose UD Devices as the network....DirectionsChromecast tablets, Apple TVs, and Wi-Fi printers need to be set up as shared devices. ... If you are registering a shared device, like a wireless printer or an AirPlay device, click Connecting a Shared Device below.More items...•Jul 8, 2019
What is UD Wi-Fi?
Eduroam (education roaming) is the preferred everyday WiFi network for students, faculty, and staff. The network's level of encryption allows for protected access to confidential, critical information (i.e., PII).
How do I connect my phone to my Verizon FIOS router?
Verizon Wireless Home Phone - Activate / Set Up DeviceInsert the battery. ... Attach the antenna to the device.Disconnect the home telephone from the wall jack.Connect the home telephone to the device using a RJ11 phone cable. ... Connect the power adapter to the device then plug it into an AC power receptacle.Press the.More items...
How do I connect my laptop to my Verizon FIOS router?
On your laptop, do you have a little "wireless" icon in the system tray? If so open it and look for the network with the SSID which matches the value you found on the router and click "Connect". It will ask you for a key or password which is the other value you recorded from the sticker. That should do it.Aug 14, 2010
Why can't I connect to my Verizon Wi-Fi?
When all else fails, try unplugging the router and modem for about 60 seconds, to reset them, then plug them back in. This will reset them with the ISP and may fix the problem. If that didn't do it, the next step to try is manually removing and re-adding the Wi-Fi network from the device's settings.
Secure Wi-Fi for UD students, faculty and staff
Set up your wireless devices (including laptops) by running the EduRoam Setup Wizard from each device while on campus. You'll be prompted to install the Secure W2 agent on your device and return to the setup wizard to complete the configuration process.
Connecting gaming devices and Internet TV to the UD network
Directions for connecting gaming devices and Internet TV are available here >>
Open Wi-Fi for guests and visitors
The unencrypted wireless network provides guests with temporary wireless Internet access.
Off campus access to the UD network
Most campus resources, like UD Google Apps, Porches and Isidore, are available off-campus by logging into these websites with your UD username and password while connected to the internet (just like on-campus).
Installation
UD Mobile works with firmware 5.0.16 and greater. Firmware versions lower than 5.0.16 may work but are not officially supported and have known issues which are only fixed by firmware update. The latest 5.x firmware now requires a 500 series Z-Wave board. If upgrading from 4.x to 5.x be sure to select firmware which is compatible with your system.
Quick Start Guides
Upon Installation the app will prompt to setup using ISY Portal. Select Yes.
Backup and Restore
Backing up the UD Mobile App will save all App Systems, Favorites, and Customizations.
Home Tab
The initial home tab screen will show a list of the users ISYs. Clicking an ISY will show the “Devices and Scenes”, “Network Resources, “Variables” and “My Programs” folders.
Customizations
Icon Colors can be changed at the Global, Individual, and Favorites levels. Global and Individual Color mappings can be set to match node status values. Hex color is 6 character hex prefixed by "#" (i.e. #808080). Eight character hex codes may be accepted with the first 2 characters representing alpha.
Edit Locks
Lock all top bar action items, Admin Tab Items and Settings Tab Items. Only the Global User Preferences item will be active on the Settings Tab and only the Lock Edits available to change with password.
Favorite Examples
The following is an example of adding a custom toggle for a door lock, but the process is similar for all nodes/programs/variables. A door lock is used in this example as it does not support On or Off commands, so the app will not show a toggle indicator and will only open to the Node's Dashboard when clicked on the Favorites Screen.
UD Mobile Thrives On Nodes!
We developed UD Mobile from the ground up to not only integrate with your Z-Wave, INSTEON, X10 devices, but also to integrate with all your ISY’s node servers. Yes! Using UD Mobile, you can now monitor and control your Ecobee, Hue, Ring, Tesla, Solar Edge, Sonos, Lutron, Harmony Hub, ELK, all the climate services, etc.
Lutron
Whether you want to integration with Lutron Shades or contemplating an d upgrade to a more professional lighting solution, this node server is for you. You can integrate pretty much any Lutron device/sensor limited only to your Lutron system (Radio RA vs. Caseta).
camect
Say what? camect is an AI based, local and private camera recording and monitoring hub. It can detect such things as people, faces, deliveries, insects, animals, wind, etc. With this node server, you can automate what should happen based on what the camect detects.
DPerry
Short question: Where are the basic "this is how to setup UD Mobile" instructions?
Javi
We are still working on setup instructions for existing ISY's, there is automatic discovery, setup, and ISY Portal account creation for new ISY's. Minimum firmware is 5.0.16.
Secure Wi-Fi For Ud Students, Faculty and Staff
- Set up your wireless devices (including laptops) by running the EduRoam Setup Wizard from each device while on campus. You'll be prompted to install the Secure W2 agent on your device and return to the setup wizard to complete the configuration process. If you're connecting an Apple computer, see the directions for Joining EduRoam on Mac Computers....
Open Wi-Fi For Guests and visitors
- The unencrypted wireless network provides guests with temporary wireless Internet access. Self-Registered Guest Access: Visitors to UD can self-register for guest access to UDconnect here. Self-registered accounts provide a network password good for 16 hours and are renewable up to four times. Sponsored Guest Access: Campus faculty and staff hosting visitors who require lon…
Off Campus Access to The Ud Network
- Most campus resources, like UD Google Apps, Porches and Isidore, are available off-campus by logging into these websites with your UD username and password while connected to the internet (just like on-campus). However, a handful of secure campus resources, like Banner INB, and Cognos are protected from off-campus and can only be accessed through use of our campus Vi…