How do you test Fernox protectors?
The Protector Test Kit provides a rapid on-site analysis of the concentration of all Fernox Protectors in central heating system water, and is designed to test 25 systems in full. Easy and intuitive to use, it is a simple and accurate testing method to establish the presence of inhibitor within the system.
What is the express inhibitor test for Fernox protectors?
The Express Inhibitor Test provides a rapid on-site analysis of the concentration of all Fernox Protectors, and other molybdate based inhibitors, in central heating system water. Easy and intuitive to use, it is a quick and simple testing method to establish the presence of inhibitor within the system.
Is Fernox antifreeze protector alphi-11 food safe?
Fernox Antifreeze Protector Alphi-11 has gained the NSF HT1 registration, meaning it is certified safe for ‘incidental food contact’. As a result, Fernox Antifreeze Protector Alphi-11, which combines the benefits
What is included in the protector test kit?
The Protector Test Kit is supplied with all the equipment and reagents required in determining the Protector/inhibitor levels of at least 25 heating systems. In order to obtain accurate results all equipment should be thoroughly rinsed with tap water after use.
How long does fernox F1 last?
A correctly protected with both a filter and inhibitor, regularly serviced boiler will last 7-10 years or more.
Is fernox toxic?
Fernox Protector F1 is classified as non-hazardous for human health, but as with all chemicals, keep out of reach of children. In case of contact with eyes or skin, rinse immediately with plenty of water.
How do you check fernox levels?
2:244:47Fernox - How To Use Our Universal Test Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipTest itself simply dip the test strip in the water. And marry up against the coordinating color onMoreTest itself simply dip the test strip in the water. And marry up against the coordinating color on the box provided that will tell you the ph if there is any an issue with the ph.
How do you test a central heating inhibitor?
Here are the six simple steps for conducting the test:Place a number 1 tablet and a number 2 tablet into the test tube provided. ... Fill the tube to the top with a water sample taken from the central heating system.Plug the top of the tube and shake vigorously.Allow to stand for 10 minutes, shaking from time to time.More items...
Can you add too much fernox?
Can I overdose with Fernox Protector F1 or Protector + Filter Fluid? No, overdosing is not detrimental to the system. It is important to ensure that sufficient Protector is present in the system.
Is fernox flammable?
The Fernox Express range uses Barrier Pressure Pack technology and compressed air propellent to expel the product so the entire range is non-flammable.
Can you put too much inhibitor in central heating?
The simple answer is no. You can never add too much inhibitor to your central heating system and dosing it up cannot cause any damage. Adding more inhibitor is only a good thing for your system as it will provide even more protection.
What is a fernox test?
Fernox Water Quality Test is a paperless, smart phone driven, postal laboratory service which provides a diagnostic check of five key water quality criteria to guard against the causes of central heating problems.
How do you measure inhibitor levels?
0:127:43The Fernox Express Inhibitor Test Walkthrough Demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it will give you an indication of whether there's enough inhibitor in the system to preventMoreAnd it will give you an indication of whether there's enough inhibitor in the system to prevent things like corrosion. And corrosion is bad because it can damage your radiators.
How to track Fernox test results?
It’s easy to keep track of test results with the free to download Fernox Water Test App, which installers can use to manage and evidence each test. Using the in-app camera, users take a picture of the test strip and select its colour to generate the pass or fail result. Using this process will auto-generate a PDF certificate with the result to your email address and this acts as evidence that the test has been completed and the system is fully protected. For ease, all of your submissions will be stored in your account for you to view and export on demand. If a test fails, installers can also demonstrate that action has been taken and the system subsequently re-tested to receive a positive result.
How to take a water sample from Fernox?
1. Scan QR code on the test strip vial, download Fernox Water Test App and register. 2. Add new sample on the App. 3. Fill out system details (address, age of system etc.) 4. Take a sample of system water which is representative of the system as a whole (drain the water for several seconds before taking the sample) 5.
How to test for inhibitors in water?
Simply dip the test strip into the system water and it will instantly change colour. By comparing the test strip to the colour chart label on the bottle, installers can assess whether the system water includes the correct concentration of inhibitor. A fully protected system will have inhibitor levels of 100ppm or above – and will pass the test. However, if the test fails and a result of less than 100ppm is received, the system should be re-dosed.
What to do if dip test shows less than 100ppm?
If the dip test shows less than 100ppm, installers can immediately resolve the issue by adding a high-quality inhibitor such as Fernox Protector F1 or where a filter is fitted, Protector+ Filter Fluid. The test can be re-taken once the inhibitor has circulated to confirm the level has been met.
What is Express Inhibitor Test?
The Express Inhibitor Test provides a rapid on-site analysis of the concentration of all Fernox Protectors, and other molybdate based inhibitors, in central heating system water. Easy and intuitive to use, it is a quick and simple testing method to establish the presence of inhibitor within the system. Testing the concentration of inhibitor allows compliance with BS 7593:2019, the Benchmark scheme, and may be required for compliance with boiler warranties.
What is the inhibitor level of a fully protected system?
A fully protected system will have inhibitor levels of 100ppm or above – and will pass the test. However, if the test fails and a result of less than 100ppm is received, the system should be re-dosed.
How long should you let Fernox circulate?
Fernox recommend that you let the system circulate for at least 15 minutes. Also having the system on hot will help speed this up.
What is the F1 inhibitor?
Protector F1 is the market leading inhibitor which prevents corrosion and limescale formation in central heating systems. This high performance
Is Fernox antifreeze safe?
Fernox Antifreeze Protector Alphi-11 has gained the NSF HT1 registration, meaning it is certified safe for ‘incidental food contact’. As a result, Fernox Antifreeze Protector Alphi-11, which combines the benefits