Class B Accident. An Army accident with resulting total cost of property damage of $500,000 or more but less than $2,000,000; an injury and/or occupational illness that results in permanent partial disability; or when three or more personnel are hospitalized as inpatients as a result of a single occurrence.
Full Answer
What is the cost estimating structure for Army Material Systems?
For Army material systems there are two different applicable cost structures. The first is the Army Cost Estimating Structure (ACES), as outlined in Appendix 3. Army cost estimates must use the ACES. The second structure is the MIL-STD-881D Work-Breakdown Structure (WBS).
What is support breakdown in a military cost analysis?
ARMY COST ANALYSIS MANUAL A– 30 system form design through disposal. Support breakdown includes management and general administrative support staff including Military, Civilian, Contractor, and other indirect and non-labor costs. 2.01.01 GOVERNMENT PERSONNEL
What costs are included in military fuel costs?
For fuel purchased from the Defense Logistics Agency (DLA), these costs include a surcharge for DLA overhead and operating expenses (transportation, storage, and inventory management). These costs may also include the cost of field-generated electricity and commercial electricity necessary to support the operation of a system.
What is the military Cost Index?
It provides costs for Soldiers, Civilians, and Contractors. It can provide top level costs by grade or rank or more detailed cost information by Area of Concentration (AOC), Military Occupational Specialty (MOS), Civilian Occupational Series, and Bureau of Labor Statistics Standard Occupational Codes.
What is ERC a Army?
(b) ERC A. Principal weapon/mission systems and equipment (to include technology automation equipment), which are essential to the accomplishment of primary doctrinal mission tasks and force protection, and critical mission support items.
What is 10/20 standard in the Army?
Army Regulation (AR) 750-1 defines the Army's -10-20 Maintenance Standard as the following: Equipment is Fully Mission Capable. All faults identified following prescribed intervals using the applicable TM. All repairs, services and other related work with parts on hand are complete.
What is DA Pam 750 8?
ARMY - DA PAM 750-8 - THE ARMY MAINTENANCE MANAGEMENT SYSTEM (TAMMS) USERS MANUAL | Engineering360.
What Army regulation covers 5988?
Per DA Pam 750–8, the DA Form 5988–E annotated with faults is not destroyed until all faults are transferred to another form or corrected. Tight control of the flow of this form once a fault has been entered on it should be thoroughly covered in the units field maintenance SOP.
What is a Mac chart in the Army?
The Maintenance Allocation Chart (MAC) in section II designates overall authority and responsibility for the performance of maintenance functions on the identified end item or component.
What is an FSC in the Army?
A maneuver battalion forward support company's (FSC) ability to forecast and match sustainment requirements to capabilities is critical to a unit's tactical success. The Joint Multinational Readiness Center (JMRC), provides a realistic near-peer threat to a brigade combat team (BCT).
What is a DD 314?
DD Form 314 "Preventive Maintenance Schedule and Record"
What is DA form 348?
DA Form 348, Equipment Operator's Qualification Record (Except Aircraft), is a form issued by the Department of the Army (DA) to determine the equipment operating qualifications and driving experience of a service member.
What is a DA form 5987 E?
DA Form 5987-E "Motor Equipment Dispatch"
What is a DA Form 5988?
DA Form 5988-E, Equipment Maintenance and Inspection Worksheet (EGA), is a form used to record faults found during the inspection of Army-owned equipment after missions. These faults include PMCS, maintenance activity inspections, diagnostic checks, and spot checks.
What are the 5 parts of an Ncoer?
What is an NCOER?Duty evaluations. Either the DA Form 67–9 or DA Form 2166–8 is used for these evaluations.School evaluations. Either the DA Form 1059 and DA Form 1059–1 is used for these evaluations.DA evaluations. Selection boards and personnel management systems are used for these evaluations. Duty and.
What are the 4 levels of maintenance Army?
Army Maintenance Level FutureField Maintenance.Sustainment Maintenance.
What are the 4 levels of maintenance Army?
Army Maintenance Level FutureField Maintenance.Sustainment Maintenance.
What are the two levels of maintenance?
Field-level maintenance is an on-system or near-system repair process that returns equipment to the user. Sustainment-level maintenance is an off-system repair process that returns equipment to the supply system.
What are the levels of maintenance?
Field-level is comprised of both organizational maintenance, which includes inspections, servicing, handling, preventive and corrective maintenance, and Intermediate Maintenance, which includes assembly and disassembly beyond the capability of the organizational level.
How many levels of maintenance are there in the Army?
LEVELS OF MAINTENANCE The Army's maintenance structure concept has three levels: unit, intermediate, and depot.
What is cost analysis?
1. Cost analysis is used to produce cost estimates for materiel systems, automated information systems, force units, training, and other Army programs and projects. Cost analysis enables the Army to make cost informed decisions.
What is depot maintenance?
Depot maintenance is the cost of labor, materiel, and overhead incurred in performing major overhauls or any other depot-level maintenance on a system or any of its major end items ( e.g., aircraft engines) at centralized repair depots, contractor repair facilities, or onsite by depot teams.
Is cost analysis a tool?
However, despite the limitations, cost analysis is a powerful tool.