Last updated: December 31, 2021 Drywalling your home can be expensive, but to avoid getting ripped off, it’s a good idea to know the going rate before engaging a local contractor. Typically, the average cost to install drywall is $1,842, with the real range being $1,020 to $2,876.
How much does it cost to build drywall?
- Materials – Drywall materials at $1.69/sq. ft. ...
- Labor – For labor costs, the national average for a drywall installer is $35.95 per hour, and a plasterer is $36.99/hour.
- Pros and Cons – Drywall is installed much faster. Plastering could double the labor time.Plaster has to be sanded and finished. ...
How much should I charge to hang and finish drywall?
- Hanging drywall costs $0.85 to $1.90 per square foot without taping or finishing.
- Taping and mudding drywall costs $0.35 to $1.10 per square foot.
- Texturing drywall costs $0.80 to $2.00 per square foot more.
- Removing old drywall costs $0.50 to $2.50 per square foot more.
What is the average price for drywall?
The average cost to install drywall, including the finishing, taping, labor costs, and materials, is between $1.50 to $3 per square foot. This cost works out to around $60 to $90 per drywall panel. So, for a standard 12-foot by 12-foot room (using 18 panels), you could expect to pay anywhere from $1,000 to $1,600 in total.
How much to hang and finish drywall?
To hang and get this level of finish on your drywall, you’ll pay between $1.00 and $2.50 for each square foot. Think about how much finish your drywall needs to look complete and nice. Rooms you don’t go in as much like your basement or attic will require a lower finish level than living or family rooms.
Did drywall go up in price?
The PPI for all gypsum products has increased 6.3% over the past 12 months while the index for gypsum building materials (e.g., drywall) is up 6.6%. Prices paid for ready-mix concrete (RMC) climbed 0.2% (seasonally adjusted), following a 0.3% increase in February.
Why are drywall prices increasing?
There are a bunch of reasons drywall prices can rise. As with most commodities, increased demand or decreased supply can have an affect on drywall board prices. In this case, neither of these appears to be true. Manufacturers have seen a decrease in demand of 50 percent since the height of the building boom.
How much is a sheet of drywall cost?
Sheetrock and drywall costs $10 to $20 per sheet or $0.30 to $0.50 per square foot on average, depending on size, thickness, and type. Gypsum plasterboard prices are $12 to $16 per sheet. Drywall materials cost $200 to $400 to cover the walls and ceiling of a 12' x 12' bedroom (500 SF).
How much does it cost to hang and finish drywall per square foot?
Drywall installation costs $1.50 to $3.50 per square foot, depending on the ceiling height, drywall type, and level of finish. Drywall costs $0.50 to $0.80 per square foot for materials. The labor cost to hang and finish drywall is $1.00 to $2.70 per square foot. The cost to drywall a 12x12 room is $580 to $1,800.
Will construction costs go down in 2022?
Linesight's latest Quarterly Construction Materials Costs report shows that higher prices seen in 2021 are set to continue throughout 2022.
Are building materials going up in 2022?
This adds up to an 8% jump in building materials prices since the start of 2022. Building materials prices increased 20.4% year over year and have risen 33% since the start of the pandemic.
How much does a 4x8 sheet of drywall cost?
Average Drywall Prices Per Sheet The average price for a 4-foot-by-8-foot sheet of drywall is $15. For the same sheet of drywall, prices can range from $12 to $20.
How much does it cost to sheetrock per square foot?
Drywall costs $1.50 to $3 per square foot, including materials and installation....Cost of Drywall Per Square Foot.ItemPrice Per Square FootBasic Labor$0.50 - $0.75Finishes/Texturing$0.50 - $1.50Total$1.50 - $31 more row
How much does it cost to drywall 1000 square feet?
The national average cost to install drywall is between $1,600 and $3,500, with most homeowners spending around $2,000 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel. At the low end, you can install 500 sq.
How much should I charge to tape and mud drywall?
The average cost to tape and mud drywall is $0.35 to $1.10 per square foot, not including sanding or the final finish to prime the surface for paint. Taping and mudding drywall joints for a standard 12' x 12' bedroom costs $180 to $580.
How do you charge for drywall?
People typically charge about $1,800, or between $955 and $2,550 to hang drywall. Low-end jobs can run about $450 while high-end jobs reach $5,000 or more. That means you should charge between $1 and $3 per square foot for materials and labor for an average project.
How much should I charge to install drywall?
The average cost to install drywall, including the finishing, taping, labor costs, and materials, is between $1.50 to $3 per square foot. This cost works out to around $60 to $90 per drywall panel.
How much does drywall cost per sheet?
Depending on the brand and the thickness of drywall needed for installation, the per sheet price is going to range from $9.50 to $18 each, average price $11.2 5 each. Installers can often get access to lower unit prices for drywall if they buy in bulk.
How much does white drywall cost?
$10. This white drywall is available with either square or tapered edges, and historically it has been the most prevalent type of drywall used in residential construction for living rooms and bedrooms.
How thick is drywall?
Thickness – 3/8” to ½” thick. The drywall size most commonly used in residential walls is 4’ wide, 8’ tall, and ½” thick —the average wall height. Ceiling drywall tends to be made lighter due to significant gravitational forces, and some are labeled “sag resistant.”.
How much does it cost to frame a 12x12 room?
How much to frame and drywall a room? A 12’ by 12’ room with 8’-high walls is a total of 576 square feet. With framing at $4.50 per square foot, it will cost $1,728 to frame, and another $872 to hang drywall for a total cost of $2,600.
What is drywall called?
What we refer to today as drywall was originally called Sackett Board when it was invented by U.S. Gypsum Company in 1916. Prior to its release on the market, the standard solution for creating wall surfaces, both residential and commercially, was to use a mix of lime and sand or concrete called plaster to sculpt a wall surface to coat a board. As widespread as the use of drywall has become, it is not suitable for every construction need, especially when more elaborate work is required or the wall features curved surfaces.
How much is asbestos per square foot?
This typically averages around $4.50 per square foot, including labor and materials. Asbestos in drywall products - Asbestos has had a roller coaster of a ride in relation to bans, phased bans, and partial bans.
How much does it cost to remove drywall?
If you want someone else to take care of tearing out the old drywall, the costs typically average somewhere between $4 and $6 per square foot, and another $400 to $600 to have the debris taken off-site for disposal .
Drywall prices
Sheetrock and drywall costs $10 to $20 per sheet or $0.30 to $0.50 per square foot on average, depending on size, thickness, and type. Gypsum plasterboard prices are $12 to $16 per sheet. Drywall materials cost $200 to $400 to cover the walls and ceiling of a 12' x 12' bedroom (500 SF).
Drywall prices by type
Regular drywall costs $8 to $20 per sheet, depending on size and thickness. Standard drywall—also called whiteboard—ranges from 1/4" to 5/8" thick and has a gypsum core sandwiched between two layers of gray, white, or brown paper. Regular drywall is not moisture, mold, or fire-resistant.
Bulk drywall wholesale prices
Bulk drywall orders of 34 panels or more qualify for a 10% to 25% discount, depending on the drywall type and the store. Some home improvement and building supply stores require minimum orders of 48 to 52 sheets for discounts on mold-resistant or fire-resistant drywall.
Sheetrock prices
Sheetrock costs $12 to $20 per panel, depending on the type and thickness. Though the terms drywall and sheetrock are often used interchangeably, Sheetrock is a specific brand of drywall made by U.S. Gypsum (USG) that undergoes extensive quality control testing.
Drywall material prices
Drywall supplies and materials cost $200 to $400 to cover 500 square feet of wall and ceiling surface, enough for a standard 12' x 12' bedroom.
Frequently asked questions
Home Depot, Lowe's, and local building supply stores sell drywall. Some building supply stores only sell sheetrock in bulk quantities, but their prices are typically lower than retail chain stores.
Drywall for Every Application
Find the drywall materials and tools you need for all of your interior walls and ceilings.
Safer, Easier Shopping
Buy online or through our mobile app and pick up at your local Lowe’s.
All Drywall
Drywall is essential in the formation of any room. Bedrooms, bathrooms and even the kitchen use drywall boards to create the walls of the room and the ceilings. Whether you're doing new drywall projects or need a drywall repair kit, here's some helpful information on drywall sizes and types.
How much does drywall cost per square foot?
Labor starts at around $1 a square foot but can go as high as $2.50 a square foot, depending on the job size and level of finish.
How much does it cost to install drywall?
With the cost of material, the total cost range to install drywall is between $1.50 and $3.50 a square foot, depending on the job type and size. Drywall can be installed both vertically and horizontally. Vertically is the most common installation, particularly in homes with 8-foot ceilings.
How many levels of drywall are there?
There are six levels of finishing when it comes to drywall installation. The first few levels are simply parts of the total installation, while the last few levels are designed for getting it ready for painting or decorative textures. The following costs are what the labor costs are to install the drywall to each of the various finish levels. There is a great degree of overlap, depending on the job size and drywall type.
How much does paperless drywall cost?
This exterior makes the drywall moisture and mold-resistant and stronger and more durable. It can be more difficult to cut and install than traditional drywall. It is also more difficult to finish because the texture is not as smooth. These two attributes mean that it can be more expensive to install than other drywall types. It costs between $15 and $22 a sheet on average.
What is the best drywall for mold?
If you need extra protection against moisture and potential mold growth, you want “purple” drywall. This drywall has a coating to prevent moisture absorption, like green board, but it also inhibits mold growth. Purple board usually offers superior performance against moisture as well, so if you have had issues with mold in the past, purple board may be the better choice. Sometimes, the coating on purple board is not as flat as the standard and green board, making it more difficult to finish. Purple drywall costs between $13 and $15 a sheet on average.
What size is drywall?
Drywall comes in a few standard sizes. It is the easiest to work with in the 4’x8’ size, so this is the size most often used by installers unless a larger size is required. For ceilings and rooms with high ceilings, there are also 4’x12’ and 4’x16’ sheets.
How thick is drywall?
Drywall comes in thicknesses ranging from ¼” to ⅝”, with ½” being the most popular. The sheet thickness is usually tied to the drywall type and overall size. Not all drywall thicknesses are right for every project. Sometimes, building codes dictate the drywall thickness.
How much will non-building starts increase in 2021?
Nonbuilding starts are down 15%, but will increase 10% in 2021. Typically, when work volume decreases, the bidding environment gets more competitive. We can always expect some margin decline when there are fewer nonresidential projects to bid on, which typically results in sharper pencils.
How much has residential business dropped in 2020?
Residential business volume dropped 12% from the January 2020 peak to the May bottom, but has since recovered 22% and now stands at a post Great Recession high, 10% above one year ago. Although residential spending remains near this high level for the next year, volume after inflation begins to drop by midyear.
What is the inflation rate for 2020?
Nonresidential inflation for 2020 dropped to 2.5%, the first time in 7 years below 4%. It’s expected to increase in 2021.
What is the capacity utilization rate for 2021?
Capacity Utilization dropped from 82% in January 2020 to 56% in April. In mid-August, CapU was up to 61%, still very low. As of January 23, 2021 CapU is up to 76%, well above April’s 56% but still below desired levels. Steel manufacturing output is still down compared to pre-covid levels.
Is the construction market weaker in 2021?
Almost every construction market has a weaker spending outlook in 2021 than in 2020, because approximately 50% of spending in 2021 is generated from 2020 starts, and 2020 nonresidential starts are down 10% to 25%, several markets down 40%. Nonbuilding starts are down 15%, but will increase 10% in 2021.
Is nonresidential inflation low?
Even though material input costs are up for 2020, nonresidential inflation in 2020 remained low, probably influence d by a reduction in margins due to the decline in new construction starts (-24%), which is a decline in new work to bid on. Volume = spending minus inflation.