Cost to Pave a Driveway
| Driveway Paving Cost Calculator | Zip Code | Sq. ft. | |
| Paving Material Prices | $375.00 - $437.50 | $462.50 - $525.00 | $550.00 - $650.00 |
| Installation Cost | $1250.00 - $1275.00 | $1500.00 - $1575.00 | $2250.00 - $2900.00 |
| Total | $1625.00 - $1712.50 | $1962.50 - $2100.00 | $2800.00 - $3550.00 |
| Total Average Cost per square foot | $6.67 | $8.13 | $12.70 |
How much does it cost to pave a driveway?
‘Before you can pave your new driveway, you’ll have to get the land ready, which usually costs between $5 and $8 per square foot,’ says Bailey. ‘This step includes evening out the land to help prevent serious problems from happening down the road.’
How much is paving driveway?
Revamping the driveway is one way to do both—and it could even add value to your home, depending on the market, typical homes in your area and the type of material you choose. A driveway paving cost is $4,740 on average, according to HomeAdvisor, but the price tag can vary depending on various factors.
What is the average cost of a driveway?
Gravel driveway cost. A gravel driveway costs $1 to $3 per square foot to install. A 12×25 (1-car) gravel driveway costs $300 to $900, and a 24×24 (2-car) driveway is $600 to $1,800.Costs depend on the size and depth, gravel type, soil conditions, labor, excavation, grading, permits, and optional grid stabilization.
How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Is it cheaper to pave or gravel a driveway?
A gravel driveway is a more budget-friendly option than paving with concrete, which runs from $4 to $15 per square foot.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
Why is paving a driveway so expensive?
Labor. Labor also drives the cost of driveway paving since it's a labor-intensive process. The labor cost to pave an average 450-square-foot driveway could run $5 to $7 per square foot or about $2,250. A driveway that has curves or is circular will cost more to complete, so labor costs will also increase.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
What is the best driveway to have?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
What is the most cost effective driveway?
Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you're installing your driveway on a shoestring budget, gravel is your best choice.
Can you pave driveway yourself?
Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
What is the life expectancy of a driveway?
The average life of your concrete driveway will depend on installation methods, environmental conditions and temperatures. However, you can expect your surface to last anywhere from 25 to 30 years with proper care. The key to prolonging the life of your investment is to pay attention to wear and tear each season.
What’s the cheapest type of driveway material?
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1...
How long can a driveway last?
It depends on the material used to pave the driveway. Gravel can last up to 100 years with a solid foundation and regular maintenance. Concrete can...
How long does it take before you can drive on a new driveway?
Different materials require different times to cure. Asphalt takes at least 48 to 72 hours to fully cure while concrete can take seven to 10 days....
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does it cost to pave a driveway?
While gravel and asphalt together cost around $4.50 a square foot in materials, the labor to pave the driveway will cost around $5 to $7 a square foot , depending on the complexity of the job.
How much does gravel cost?
Gravel. Gravel is the least expensive material you can use for your driveway, costing between $1 and $2 a square foot. In warm climates, it can last for decades with little maintenance. But in areas that see snowfall, plows and shovels can disturb the gravel, and pieces of rock can damage snowblowers.
What is tar and chip driveway?
Chip-sealed driveways, also called tar-and-chip, are a way to make asphalt driveways more durable and longer-lasting. A layer of asphalt is put down first, then a layer of aggregate is put on top and compacted into the tar.
What is interlocking pavers?
Interlocking Pavers. Interlocking pavers are one of the most durable and attractive forms of driveway paving. The pavers can be made of concrete, stone, brick, or composites and come in many shapes, sizes, and colors. Therefore, it is possible to create very interesting and unique designs.
What is the maintenance of a driveway?
Maintenance. Maintenance for driveways depends a lot on the climate you live in and the type of driveway. For both asphalt and concrete driveways, pay attention to cracks, frost heaves, and other structural problems with the material.
Why is it important to have a driveway freshly paved?
Having your driveway freshly paved will not only make your property look better, but it will also help prevent damage due to potholes and other issues inherent with older driveways.
How much does stamped concrete cost?
Stamped concrete is an attractive way to add color and design to a driveway. It costs around $8 to $12 a square foot, and multiple patterns and colors are available, which allows for customization. Like poured concrete, it does better in hot climates than cold climates and can be expensive and difficult to repair.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to pave a parking lot?
Cost to pave an asphalt parking lot. Paving an asphalt parking lot costs $3 to $7 per square foot, not including marking, striping, curbing, or permits. Paving a 10-car asphalt parking lot costs $9,000 to $21,000 on average or $900 to $2,100 per space of 300 square feet.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does a driveway cost with pavers?
A driveway with grass pavers ranges between $6,100 and $12,200 or $10 to $20 per square foot. Interlocking systems like Turfstone combine the look of a lawn with the functionality of pavement.
How much does a permeable driveway cost?
A permeable paver driveway ranges between $6,100 and $24,350 or $10 to $40 per square foot. They are typically concrete, brick or stone, but gaps between the surface along with a porous gravel base underneath allow the space to absorb large amounts of rain.
What is the best material for a driveway?
Functionally, cobblestone and brick are the best driveway materials because they hold the most pressure and last the longest. Visually, natural stone and grass pavers can add a unique look. Grass and permeable pavements are best for water drainage.
How much does pavers cost?
Driveway pavers cost between $10 and $50 per square foot. Assuming a standard 16-by-38-foot surface area, the total cost ranges between $6,100 and $30,400, or $17,000 on average. Depending on the exact material and location, that price can increase to $80 per square foot, or $49,000 total.
How much does a concrete paver cost?
The $6,100 to $15,200 or $10 to $25 per square foot price make concrete pavers an affordable option for this type of driveway. They have a strength rating of about 9,000 PSI. A variety of shapes and designs help you create a custom look.
How much does it cost to install pavers?
Expect to pay between $10 and $50 per square foot for installing driveway pavers. The cost of materials ranges from about $2 to $20 per square foot if using typical mid-grade stones or brick. That price increases with fancier and more intricate brick designs.
How much does it cost to build a cobblestone driveway?
Expect to pay between $12,200 and $42,600 or $20 to $70 per square foot for a cobblestone driveway. It's among the most expensive options but comes in a wide range of styles, colors, and textures. Combining small and large pieces can result in unique patterns.
How much does it cost to pave a driveway?
The labor cost to pave an average 450-square-foot driveway could run $5 to $7 per square foot or about $2,250. A driveway that has curves or is circular will cost more to complete, so labor costs will also increase. Labor accounts for up to 50 percent of the cost of most driveway installations. Still, it’s worth the price to have experienced laborers carefully pave a durable driveway that will be used countless times.
How much does it cost to resurface an asphalt driveway?
Some homeowners may be interested in updating an old driveway to improve the property’s appearance. Resurfacing an asphalt driveway costs $1 to $2 per square foot. If an asphalt driveway is too thin and can’t be resurfaced anymore, it may need to be removed and replaced.
How long does asphalt last?
Many homeowners prefer asphalt due to its ability to handle extreme temperatures better than concrete. Asphalt driveways should be sealed every 3 to 5 years to keep them fresh and prevent cracks from widening. Compared to concrete, asphalt is easier and cheaper to repair than concrete, though it only lasts 15 to 20 years. You can expect to pay $7 to $13 per square foot to lay asphalt on your driveway. And if you prefer the durability of an asphalt driveway but wish there were more decorative options than plain black, you can ask your contractor about stamping or coloring asphalt.
What is the best material to pave a driveway?
Homeowners aren’t limited to concrete or asphalt for a driveway, though they are the most common choices. Those who have stylish homes may prefer to pave a driveway with materials that match their exterior, and green-space lovers may choose a grass paver alternative. The material choice will significantly influence the total price to pave a driveway. Gravel tends to be cheaper, and stone pavers typically cost more. Determine your budget, then consider the options that meet your needs and preferences.
How long does a concrete driveway last?
A concrete driveway usually lasts 40 years before it has a really rough appearance that can only be solved with a total replacement. Asphalt driveways simply can’t outlast extreme weather conditions forever since their flexibility ends up becoming their Achilles heel. If the driveway has reached its average lifespan, it’s time to consider what kind of driveway you want to replace it with.
What is the best way to make a driveway eco friendly?
Rubber. For an eco-friendly option, consider a rubber driveway that can be designed in a variety of colors. Recycled rubber is poured on existing concrete or asphalt to create a surface with a slight softness to it, which may save a few skinned knees.
Why is my driveway shifted over time?
If the driveway was properly sloped or leveled when installed, but you’re seeing drainage problems like pooling water now, then there’s a problem with how your driveway has shifted over time. Weather, trees, and the movement of the earth can all affect how level a driveway remains over time. Pooling water leads to the formation of cracks and eventually potholes. Have a driveway installer consult on-site about how to handle a drainage problem.
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
How much does it cost to dump a 1,000 square foot driveway?
The price for each dirt load comes out to approximately $160 and $121 for each concrete load.
How much does a stone cost per square foot?
Typically, standard paving stones are priced from $2.53 to $3.69 per square foot, plus tax. Prices vary depending on the manufacturer, style, or texture that you choose. When installing pavers, you will have to account for wasted paving stones.
What materials are needed for pavers?
When considering the materials needed for a paver installation, you will be looking at the following: 1 Pavers 2 Class II Road Base 3 Geotextile Fabric 4 Bedding Sand 5 Concrete 6 Joint Sand
What is the difference between pavers and labor?
Labor. The one cost of any paver installation that will make the biggest difference is the quality of labor. This is where the saying “you get what you pay for” comes into effect If you are looking for a quality paver installation. For guaranteed quality, you should work with installers with the most experience.
How much does geotextile fiber cost?
The cost of the fiber is roughly $0.37 per square foot (taxes included).