How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
How to make a concrete driveway yourself?
15 Practical Driveway Ideas Perfect for Any Budget
- Weed-Free Brick Driveway. If you have a shorter driveway, choosing paving bricks might be an option. ...
- The Cheap Driveway. Are you working on a tight budget? ...
- Tar, Chip, and Pavers Driveway. ...
- Stone with Edging. ...
- The Fancy Concrete Driveway. ...
- Driveway Made of Pavers. ...
- Cobblestone Driveway. ...
- Tar and Chip Driveway. ...
- Crushed Concrete Driveway. ...
- Permeable Driveway. ...
How much does it cost to build a concrete driveway?
Whether you’re replacing or building a new driveway, the average concrete driveway cost is $3,000 nationally, with a range of $1,800 to $6,000. It’s a worthy investment to make since it protects...
How to calculate concrete driveway cost?
To estimate costs for your project:
- Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.
- Specify Project Size and Options Enter the number of "square feet" required for the project.
- Re-calculate Click the "Update" button.
How do you calculate concrete for a driveway?
Multiply the square footage by the depth in feet to find the volume in cubic feet. You can find volume by measuring length × width × depth. Finally, divide the cubic footage by 27 to find the volume in cubic yards. This is the amount of concrete needed.
How much will my concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How do you calculate crushed concrete for a driveway?
Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This number is how many cubic yards of crushed stone you need.
Is 4 inches of concrete enough for a driveway?
The minimum thickness in most codes for a residential driveway is 4-inches of concrete on a prepared base. Using stronger concrete can decrease that to 3” in some areas, although it won't decrease the cost much if any. A properly prepared base and subbase will increase the driveway thickness by 4” to 8” too.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
How deep should a sub base be for a driveway?
How deep should my sub-base be? Generally, a flexible sub-base of unbound material needs to be at least 100mm deep, as does a bound sub-base of CBM/HBM. For bitumen-bound material, then 50mm is a typical minimum thickness.
What area will 1 ton of gravel cover?
100 square feetUnderstanding Size and Coverage Using 2 inches for the depth, the following measurements are a guide to the amount of gravel coverage per ton: 1/4 to 1/2 inch gravel, 100 square feet per ton; 1/2 to 1 inch gravel, 90 square feet per ton; and 1 1/2 to 2 inches gravel, 80 square feet per ton.
How many square feet will 5 tons of gravel cover?
How much area does 5 tons of gravel cover:- typically, 5 tons of gravel will cover approximately 540 square feet or 60 square yard or 50 square metres area for standard 2 inch depth. A ton of gravel cover around 108 sq ft area for 2 inch depth, so 5 tons of gravel = 108 × 5 = 540 sq ft coverage.
Do you need rebar for 4 inch slab?
No, rebar is not required for a 4-inch slab of concrete on grade. A 4-inch-thick slab cast on the ground and in constant touch with it will float, with no need for rebar. For concrete that is 5–6 inches thick, rebar is suggested. The thicker the slab, the more durable it will be.
Do you need gravel under concrete driveway?
You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.
How many inches thick should a driveway be?
four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
How much does it cost to pave a concrete driveway?
The average cost for a standard two car-driveway measuring 16′ ft. x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Additional Cost Factors
Your standard driveway is normally a minimum of 4 inches in thickness with a reinforced wire mesh. Which cost on average .30 – $.80 per square for materials and installation.
Concrete Driveways – Pricing and Installation Cost Checklist
Expect the Concrete driveway prices to fluctuate between various companies – each and every company have different operation expenses and over-head.
What is concrete mixed into?
Alternatively, in some factory settings, concrete is mixed into dryer forms to manufacture precast concrete products such as concrete walls. The process of concrete hardening once it has been placed is called curing, and is a slow process.
Why is concrete mixing important?
Proper mixing is essential for the production of strong , uniform concrete. It involves mixing water, aggregate, cement, and any desired additives. Production of concrete is time-sensitive, and the concrete must be placed before it hardens since it is usually prepared as a viscous fluid.
What is cement used for?
Cement is a substance that is used to bind materials, such as aggregate, by adhering to said materials, then hardening over time . While there are many types of cement, Portland cement is the most commonly used cement, and is an ingredient in concrete, mortar, and plasters.
Is concrete time sensitive?
Production of concrete is time-sensitive, and the concrete must be placed before it hardens since it is usually prepared as a viscous fluid. Some concretes are even designed to harden more quickly for applications that require rapid set time.
Calculator Use
Calculate volumes for concrete slabs, walls, footers, columns, steps, curbs and gutters. Enter dimensions in US units (inches or feet) or metric units (centimeters or meters) of your concrete structure to get the cubic yards value of the amount of concrete you will need to make this structure.
Curbs & Gutters
We calculate the volume in sections from the ground to the top of each section. The Curb and Gutter are each a section.
Should I order concrete by the yard from a ready mix company or just use bags?
Larger jobs such as driveways are easier to complete when ordering concrete by the yard, rather than trying to mix bag after bag by hand. For smaller jobs, like a walkway, modest patio or footings, you should calculate the number of concrete bags instead.
Calculating the amount of concrete needed for slabs (including odd shapes)
Rule of thumb: add 1 / 4 " to the thickness of your slab for your slab concrete budget. This assumes you have the job evenly graded to the right depth, and the grade is well compacted.
Calculating the amount of concrete needed for footings
Footings will rarely follow the drawing exactly. In rocky soil the footings may collapse when big rocks are excavated
Estimating concrete steps
Steps seem tricky to calculate but are not. If there are three steps leading up to a porch:
Calculating the amount of base fill
Granite Construction has an excellent base fill calculator on their site. Use this to figure how much material you need for the subgrade.
Requesting your ready mix supplier to visit your site
After you have chosen a Ready Mix Supplier, have a representative come to your site to give his/her opinion on the quantity required. Compare the figure with what you came up with. Discuss any variances with the supplier.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install a concrete driveway?
Most concrete driveway installation costs between $1,800 and $6,000 or $4 to $15 per square foot. The average is just above $3,000 or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement and removing the existing surface can all influence that range.
How much does a brick border cost?
Brick or stone borders add an average cost of $6 to $15 per linear foot . Heated coils are ideal in colder climates to help melt ice and slow, and range between $10 and $20 per square foot. Rebar or wire mesh may be necessary for added strength, which adds $1 to $3 per square foot.
How much does it cost to replace a driveway?
Replacing your driveway costs between $2,340 and $7,500. That includes both the price to remove the existing concrete at $540 to $1,510 and the new installation budget of $1,800 to $6,000. The exact rate depends on the size and type of cement.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How long does it take to install a driveway?
Driveway installation takes about a week, depending on its complexity, and includes the following steps: When replacing a driveway, the old material needs excavated. Your contractor determines whether the ground is firm enough to support a driveway or will need to be compacted for stability.
How much does it cost to stamp concrete?
Installing stamped concrete costs between $8 and $15 per square foot. This option allows you to add patterns and texture to your driveway. You can stamp the material to look like inlaid stone, tile or even solid marble.