| Driveway Paving Cost Calculator | Zip Code | |
|---|---|---|
| Basic | Best | |
| Installation Cost | $1250.00 - $1275.00 | $2250.00 - $2900.00 |
| Total | $1625.00 - $1712.50 | $2800.00 - $3550.00 |
| Total Average Cost per square foot | $6.67 | $12.70 |
What is the least expensive way to pave a driveway?
Of the four paving materials described in this guide, aggregate (gravel) is the least expensive, followed by asphalt, concrete, and paving stones. If you're installing your driveway on a shoestring budget, gravel is your best choice.
How do you estimate a driveway?
Figure the Area's Total Square Footage Measure the length and width of the new driveway in feet. Multiply these two numbers together to find the total square footage of the area. For example, a 20- by 40-foot driveway has a total surface area of 800 square feet.
What is the cheapest surface for a driveway?
Generally, gravel is the cheapest material, with resin and concrete being the most expensive.
How do you calculate paved driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:08-Jun-2018
How do you measure a driveway for paving?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
What type of driveway lasts the longest?
Concrete. Concrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.15-Jul-2016
Is block paving cheaper than slabs?
Is Block Paving Cheaper Than Slabs? Block paving is a little bit more expensive than slabs, but there really isn't much in it. For the increase in quality, we would certainly recommend opting for block paving.
How do I make a budget driveway?
Driveway ideas on a budgetInstall practical paving channels to cope with the wet weather.Seal your driveway paving.Bring a touch of nature to your driveway.Consider installing hard-wearing paving.Maintain your driveway properly.27-Nov-2018
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
What is hot mix asphalt?
Hot Mix Asphalt: It is also known as the “Dense-Graded Mix”. This type of asphalt is considered ideal for surfacing and repairing needs. During its production, the binder will be heated at a very high temperature to reduce viscosity. The high temperature will also remove all moisture prior to mixing.
How thick should a surface be for asphalt?
The thickness should be about two inches as it is considered a standard for asphalt overlays and surface courses. Two-inch thickness has the potential to properly bonds the surface course to the binder course. If the thickness is less than two-inch it will cause raveling, cracking, and other asphalt issues.
Is asphalt a liquid or semisolid?
Asphalt is a semi-solid form of petroleum and appears in a sticky, black, highly viscous liquid form. It is classified as a pitch and can be found in natural deposits as well as a refined product. If it has a mixture of 95 stone, sand, or gravel that bounds together by asphalt cement, then it will be known as hot mix asphalt. ...
What is the best material for a driveway?
This starts with choosing the right material. One of the most popular paving materials on the market is asphalt, commonly praised for its appearance, durability, and relatively low cost.
How much does it cost to pour a concrete driveway?
With delivery, the total cost will be around $1000. The cost of pouring a concrete driveway depends on the quality of the concrete.
How long after a driveway is poured can you drive?
It is recommended to wait between 48 and 72 hours after the asphalt has been poured before you drive, park, or walk on it.
How long does it take for a driveway to seal?
Your instinct may be to seal your driveway as soon as it's installed, but sealing it too soon actually does more harm than good. Wait until the full 6 to 12 month asphalt curation period has ended before sealing your driveway.