cost of asphalt per square foot

The average price for asphalt installation is $7 to $13 per square foot, but there are additional factors that may affect the total:

• Location on Property: Backyard installations may take longer to haul
• Regional Variations: Prices depend on fuel expenses and local averages
• Excavation/Grading: Steep driveways may cost more to prepare

Full Answer

How do you calculate the price of asphalt?

Why Does Asphalt Crack?

• The Sun. The sun is one of asphalt’s worst enemies. ...
• Moisture. Moisture beneath the surface of the asphalt causes the gravel base to shift. ...
• Ground Movement. In addition to the ground movement caused by moisture, temperature changes also create movement. ...

How to calculate asphalt cost?

Input:

• First, select one of the five options from the drop-down menu to calculate or calculate with Length, width, area, volume, density, thickness, and dirt need to remove.
• After selecting the required field, enter the values with corresponding units from the drop-down list.
• Hit Calculate button.

What is the current price of asphalt?

Asphalt prices. Asphalt prices are $40 to $80 per ton on average or $0.75 to $2.00 per square foot.Asphalt materials for a 2-car (24’x24’) driveway cost $600 to $1,100.Asphalt prices depend on the quality, volume, delivery fees, and if it's hot-mix, cold-mix, porous, recycled, or crushed.

What is the average asphalt paving cost?

Asphalt paving costs $3 to $7 per square foot on average. Asphalt materials and installation labor costs $2 to $4 per square foot, plus basic excavating and installing a gravel subgrade costs $1 to $3 per square foot. Adding colors, patterns, curbs, or sidewalks cost extra.

How much does it cost to lay asphalt over concrete?

Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.

How much does stamped asphalt cost?

Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.

How thick should a driveway be?

A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.

How much does it cost to repave an asphalt driveway?

The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.

How long does asphalt last?

An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.

How much does it cost to pave a road?

Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.

How much does it cost to install asphalt curbs?

Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.

How much does it cost to install asphalt driveways?

Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.

How many square feet does a ton of asphalt cover?

One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.

How thick is a driveway?

In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]

How much does labor cost?

Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .

Does a bigger driveway cost more?

A bigger driveway will inevitably cost more, even if you opt for a lower grade of asphalt. The length is one thing, but don’t forget that the size of a drive often includes how wide it is. Those who need to have parking space for a lot of cars will pay a much higher sum.

Does removing a driveway add to the cost of paving?

Removing an existing driveway will undoubtedly add to the costs of a paving project. Removing existing paving may take considerable time for the crew, while also generating a significant amount of waste that needs to be disposed of.

How much does it cost to install asphalt 1?

Asphalt 1 – asphaltic concrete 3 is usually installed at a depth of no less than 2″. For this project, the asphalt 1 is at 2.5″ and would cost roughly $830 installed. This tends to have a lifespan of 10 to 30 years and will need treatment every six to ten years to maintain its good looks and durability.

How long does asphalt last?

Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...

What is the mix of asphalt and sand?

Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.

What is the constituent of asphalt?

A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.

What is the greatest strength of asphalt pavement?

Flexibility is the greatest strength of asphalt pavement, allowing the surface to adapt to varying surface changes caused by weather and soil movements. Asphalt pavement is build surface that it does not retain water on its surface.

How wide is a driveway?

Usually, 9 to 10 feet wide is enough for a car but if you have a lot of vehicular movement in your house. Then you have to consider a double lane. A driveway typically extends into a truck C road or a street curb into the garage in your home. The square footage is an important factor to consider when determining the cost of the pavement. The cost of renting special equipment make a driveway less than 10 feet costlier than other sizes.

How thick were Roman roads?

The thickness of these military roads was about 0.9mand with a width of 4.3 or less but it has been observed that some Roman roads have a thickness of 2.4m.

New Roof Cost Considerations

As you might expect, there are loads of different options when it comes to a new roof. The most common choice in Atlanta is a standard architectural shingle that will last about 30 years and come at a fraction of the cost of other options like metal roofing.

Cost Of Asphalt Roofing Materials

The first thing to consider when calculating your asphalt roofs replacement cost is the cost of materials. Luckily, asphalt is the most affordable roofing option, even more affordable than wood and metal. You should expect to pay between $150 and $700 per square for materials, depending on the type of asphalt roof shingles.

Which Should I Use To Re

Asphalt, wood or slate are the preferred material for steep rooftops. However, when re-shingling a hip/steep one, consider the type of shingles that were used previously. Using a material of comparable weight and quality can help ensure that the structure is designed to support the new weight.

Asphalt Shingle Cost Per Bundle

Another option for purchasing asphalt shingles is to buy them in bundles. These packs contain enough roofing material to cover 33.3 square feet of the roof or of a square.

What Is Rubber Roofing

Rubber shingles are made from a single-ply synthetic material we know as ethylene propylene diene monomer.

Aluminum Shingle And Shake

An aluminum roof designed for residential use will have concealed fasteners, interlocking panels and PVDF coatings. Accessories and trims will be factory-formed for quality and consistency. When reflective pigments are used in the paint formula, it is the most energy efficient option and classified as a cool roof.

Pitched Roofs Vs Flat Roofs

Flat roofs are on average less expensive than pitched ones. The latter is more difficult to clean. Its also harder to spot damage, especially towards the top, for pitched roofs. These realities often sway homeowners towards flat roofs.

How much does asphalt cost per ton?

It costs between $100 to $200 per ton. Cold mix asphalt costs $10 to $50 per bag, but it can be used only for temporary repairs. Cold mix shouldn’t be used for a whole driveway because it doesn’t last more than one or two seasons. Advertisement.

How much does recycled asphalt cost?

Recycled asphalt costs between $10 to $20 per ton, compared to $100 to $200 per ton for brand-new asphalt. Using recycled asphalt can save you $675 to $1,350 on driveway materials if it’s available in your area. Sometimes an installer can mill the old material onsite, cutting down on transporting supplies to your home.

How long does an asphalt driveway last?

Most asphalt driveways last up to 20 years. If your driveway is past its prime and showing its age, it’s time for a replacement. To completely resolve asphalt driveway issues, a replacement is the way to go.

How much does it cost to seal asphalt?

Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it’s a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat. It provides a layer of protection to avoid cracking and environmental damage. An asphalt driveway requires regular maintenance, and sealing is recommended every 3 to 5 years. Any cracks or fissures should be patched up and remedied immediately.

How many square feet does a ton of concrete cover?

One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.

How much does a heated driveway cost?

A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.

How much does it cost to excavate a driveway?

Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.

How much does it cost to patch asphalt?

Asphalt patching cost. Asphalt patching costs $50 to $300 on average, depending on the size and repair method. The cheapest way to repair an asphalt driveway is with cold-mix asphalt, which costs $2 to $4 per square foot. Hot-mix asphalt repairs are more permanent and always require professional installation.

How much does it cost to repair a sinking driveway?

Repairing a sinking asphalt driveway costs $2 to $5 per square foot to fill and level small surface areas. Replacing sunken sections costs $4 to $10 per square foot for driveways with foundation issues. Hire an asphalt repair specialist to diagnose the problem.

What to do if your asphalt is not level?

If the asphalt surface is no longer level and has extensive cracks or holes, hire a paving professional. Hire a contractor or smaller company for minor asphalt repairs. Larger asphalt companies typically do resurfacing or repaving jobs only.

What is the best way to repair an asphalt driveway?

Depending on the driveway’s age and the level of damages, asphalt driveway repairs include either patching, resurfacing, or repaving. A paving contractor should inspect the asphalt pavement and foundation conditions to provide the best solution.

How much does it cost to fix a pothole?

Pothole patching costs $25 to $40 per pothole plus $100 to $250 for bringing out the machinery and crew.

How much does it cost to replace a garage apron?

Asphalt garage apron repair costs $2 to $5 per square foot to fill and level the sunken pavement. Replacing a 2-car (10’x20’) garage or driveway apron costs $800 to $2,000 on average or $4 to $10 per square foot and is a more permanent solution.

Asphalt calculator formula

Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:

Calculation examples

Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.

What if my measurements are in different units?

The best thing about our asphalt calculator is that it takes care of this for you.

How thick should a surface be for asphalt?

The thickness should be about two inches as it is considered a standard for asphalt overlays and surface courses. Two-inch thickness has the potential to properly bonds the surface course to the binder course. If the thickness is less than two-inch it will cause raveling, cracking, and other asphalt issues.

What is hot mix asphalt?

Hot Mix Asphalt: It is also known as the “Dense-Graded Mix”. This type of asphalt is considered ideal for surfacing and repairing needs. During its production, the binder will be heated at a very high temperature to reduce viscosity. The high temperature will also remove all moisture prior to mixing.

Is asphalt a liquid or semisolid?

Asphalt is a semi-solid form of petroleum and appears in a sticky, black, highly viscous liquid form. It is classified as a pitch and can be found in natural deposits as well as a refined product. If it has a mixture of 95 stone, sand, or gravel that bounds together by asphalt cement, then it will be known as hot mix asphalt. ...