Standard Interior Door Sizes
| Pre-hung doors | Bi-fold doors | Bi-fold doors | Bi-fold doors | Pocket doors |
| Width (W) | Height (H) | Single door (W) | Double door (W) | Width (W) |
| 1′-6″ (18″W) | 6′-8″ (80″H) | 1′-6″ (18″W) | 2 x 1′-6″ (36″W) | 2′-0″ (24″W) |
| 1′-8″ (20″W) | 7′-0″ (84″H) | 1′-10″ (22″W) | 2 x 1′-10″ (44″W) | 2′-2″ (26″W) |
| 1′-10″ (22″W) | 8′-0″ (96″H) | 2′-0″ (24″W) | 2 x 2′-0″ (48″W) | 2′-4″ (28″W) |
What are the standard dimensions for a door?
- Many 16 x 7 garage doors are designed with a pair of single 8-foot garage door bays. These bays are separated by a central post or column. ...
- One double door can be more visually prominent than two single doors.
- Two single doors and one double door have comparable prices. Two single doors will each need a garage door opener. ...
What is the standard commercial door size?
The biggest point is that they meet these IBC codes, and therefore, standard commercial door dimensions are on average about 36 inches by 80 inches. The IBC does include exceptions to some of these rules.
What is the normal size of a door?
The windows have been bordered up in the living area beside the front door - suggesting that they are either broken or have no glass in them. Worryingly, it looks like the ceiling is coming apart in the kitchen, as insulation can be seen poking through.
What is the standard door size for residential homes?
The standard door width can vary, since there is a ton of variety in sizes and styles of doors. But the standard common door width for US homes is 36 inches. Other very easy-to-find sizes are 30 and 32 inches. Note that when measuring the width of a door, the measurement reflects only the door panel alone, not the frame surrounding it. Standard Interior Door Width. Interior doors are any of the doors that are inside your home.
What are standard door sizes?
One of the most common front door sizes in American houses is 36 inches wide by 80 inches tall, and almost 2 inches thick. However, not all doors will have these measurements. Doors can be as narrow as 30 inches and as tall as 96 inches, and thickness can depend on the door material.
What is the most common door size?
36 inchesBut the standard common door width for US homes is 36 inches. Other very easy-to-find sizes are 30 and 32 inches. Note that when measuring the width of a door, the measurement reflects only the door panel alone, not the frame surrounding it.
What is a standard interior door size?
Standard widths include 18, 20, 24, 28, 30, 32 and 36 inches. Standard heights include 80, 84 and 96 inches. Customized sizes are available in a wide range of different designs. To measure a prehung door, remove the interior casing and measure the opening.
What size should a bedroom door be?
Bedroom door: the standard is 32-inch width and 80-inch height with one and three-eighth inch typical thickness. Double-door: this is often 60, 64, or 72 inches but there is no thickness standard. A tall and wide door should be thick to support the weight.
How tall is a door?
Height. Most interior and exterior door panels are 80 inches tall (or 6′ 8″) – this is the standard height called for by many building codes. Other common heights are 84 inches (7′) and 96 inches (8′). While custom doors vary in height, these are the ones you’ll see most often.
Why is it important to understand standard door sizes?
It’s critical to understand standard door sizes in order to not waste time or money when replacing yours. Read on to learn these dimensions, things to consider, and why you should leave installation to a pro.
What Affects Door Dimensions?
A door is a simple machine, but replacing one calls for accurate measurements. A door too big for the opening won’t close. If it’s too small, it won’t seal. Without being properly aligned, it may not open, close, or seal.
How deep is a rough door opening?
A thicker jamb or more plush carpeting needs a bigger rough opening. Most rough door openings are framed by 2x4s, which means the opening is 3 1/2 inches deep.
How wide is a bathroom door?
The same goes for widths. Doors into bathrooms, pantries and closets may not be the standard 32-inch interior door width. Instead they may be 28 or 30 inches wide.
How wide is a rough door?
Say an exterior door is 36 inches wide and 80 inches high. Using this logic, the rough door opening would be 38 inches wide and 82 and 1 1/2 inches tall.
What is a jamb door?
Jamb. These are the two vertical sides of the door frame, one on each side.
What is the standard interior door size?
Interior doors come in standard heights, widths, and thicknesses, as follows: Standard interior door height is 80 inches. This is the most common height for passage doors that lead from one room to another. An 80-inch door is called a 6/8 door (pronounced “six-eight”) ...
How wide is an entry door?
Entry doors are usually 36 inches wide. While a door width of 36 inches is oversized for an interior door, it’s the standard size for front doors. The standard height remains the same, however, at 80 inches. Most entry doors are slightly thicker than interior doors as well, with a standard thickness is 1¾ inches.
How thick is a door?
Some stores may stock doors with alternate thicknesses of 1½ inches and 1¾ inches. These are slightly thicker than standard and are often insulated or made from hardwood.
How to measure the size of a door?
Open the door and measure from the inside of one jamb to the inside of the opposite jamb—this is the spot where the sides of the door would fit when closed. Write the number down.
What is an 80 inch door called?
An 80-inch door is called a 6/8 door (pronounced “six-eight”) because it’s 6’ 8” tall. In stock, you will also find a slightly shorter 78-inch door. Called a 6/6 door, it’s reserved for closet and utility doors. Standard interior door width is 32 inches. This is the minimum width required for a passage door.
What is a prehung door?
Most of the time when you buy a door, you’ll want a pre-hung door, which means it comes with the frame (jamb) included. The other type of door, called a “slab door,” features only the door, no jamb.
What is a 6/6 door?
In stock, you will also find a slightly shorter 78-inch door. Called a 6/6 door, it’s reserved for closet and utility doors.
What is the standard size of an exterior door?
Standard Size for Exterior Doors. The standard size for an exterior door is 80 inches by 36 inches which is 6 ft, 8 inches by 3 ft. 96 inches or 8 ft. is now very common for newer homes and stock exterior doors are also commonly available in 30 and 32-inch widths.
How tall is a standard door?
The standard size for an exterior door is 80 inches by 36 inches which is 6 ft, 8 inches by 3 ft. 96 inches or 8 ft. is now very common for newer homes and stock exterior doors are also commonly available in 30 and 32-inch widths. Some door manufacturers sell doors in 7ft & 8ft heights and door widths from 24 inches to 42 inches. The height for fiberglass or steel doors are fixed at 6 ft. 8 inches tall and 8 ft. tall. The standard door thickness is 1 ¾ inch.
What is the minimum height of a door?
The height for all passage doors must be a minimum of 80 inches and the standard width sizes for interior doors are 24”, 28”, 30”, 32” and 36”. The minimum recommended door width to allow persons with disabilities’ to pass through is 36 inches. Standard thickness for an interior door is 1 3/8, if your door exceeds 36” or is over 90” in height; the recommended thickness for that door would be 1 3/4 inches. The chart below has a list of widths and heights and what those sizes are generally used for. Keep in mind, you can add these door heights to any room in your house.
How wide is a closet door?
In houses built before 1990’s the doors could be as narrow as 18 inches. Newer comes usually have a width of 30 inches and a standard high of 96” inches.
What is the standard size of a sliding glass door?
The best place to install sliding doors would be at a patio area or a deck. The standard size for a sliding glass door is 6'8" high x 6' wide.
How wide is a handicap door?
The minimum recommended door width to allow persons with disabilities’ to pass through is 36 inches. Standard thickness for an interior door is 1 3/8, if your door exceeds 36” or is over 90” in height; the recommended thickness for that door would be 1 3/4 inches.
How to measure a door?
How to Measure your Door Properly. If you are looking to replace a door you currently have, measure the existing door from top to bottom. Continue by measuring the door from left to right. You also want to measure the thickness of the door.
How to measure a standard door?
To measure your existing door, you need to take a measuring tape and measure from the bottom of the door to the top of the door – Most common doors measure: 6’8″ . Then you need to measure the width, most common width are 2’6″. Next, you need to determine which direction ...
How to measure for a door?
How to measure your existing standard interior door size 1 To measure your existing door, you need to take a measuring tape and measure from the bottom of the door to the top of the door – Most common doors measure: 6’8″. Then you need to measure the width, most common width are 2’6″. 2 Next, you need to determine which direction the door opens – in/out, left/right swings. 3 Also, measure the door jamb to know whether or not your home is existing or new construction type of door.
What is a prehung door?
Pre-hung doors, are doors that are already set in a door jamb and are ready to be installed. They also have trim moldings attached to the door jamb. Be sure that you know which direction you want your door to swing. On most Prehung doors, it will say the standard interior door size as well as which direction it will swing – either right hand swing, ...
What is the best door for linen?
Bi-fold doors – are just as they sound. They are perfect for linen closest. Pocket doors – Pocket doors are the perfect option for a tight space where you don’t have the room to open ...
What is pocket door?
Pocket doors – Pocket doors are the perfect option for a tight space where you don’t have the room to open and close a door. Pocket doors open by sliding your door into a hidden pocket inside your wall. Pre-hung doors. Bi-fold doors. Pocket doors.
Do custom doors cost more?
If for some reason, your existing interior door isn’t a standard door size – don’t worry. Custom doors can be made to match any size door opening. Although, custom doors do cost more money. On average, you can expect to pay roughly 20-25% percent more for a custom door.
What is the standard width of a door?
Standard width can range from 24” to 36” depending on the size of the doorway and the materials you want to use. If you need to build an accessible doorway, the minimum width should be 36”. The thickness of the door can vary depending on the material you choose to build it with.
What is the width of a door?
Width measures the horizontal space of your doorway. Most manufacturers make interior doors with a 32” width, but the sizes can vary. Height is the most serious standard that should be followed. The top-to-bottom length almost always measures 80”.
What is the standard height for a bedroom door?
You can find stock items that measure anywhere from 24” to 36”. And while 80” is the universal height, you can easily install a bedroom door that measures more or less.
How to frame rough opening?
There’s actually a simple formula to remembering how to frame your rough opening. All you need to do is add 2” to the width of the door and 2 ½” to the height. After you’ve measured the width of the actual door, an additional 2” for width and 2 ½” for height will give you the measurement you need to properly set up your rough opening.
What is a double door?
Interior double doors can be an elegant addition to your master bedroom, dining room, or living space. Moreover, double doors are always equal to each other in width, height, thickness, and design. You must be extra careful when measuring a double door, taking into account that everything must be measured twice.
How thick should a door be?
If your door is over 36” wide and over 90” in height, it is considered larger than the standard. In that case, a thicker door is also recommended - around 1 ¾ inches. In most cases, when you are investing in a remodeling project, you have a bit of freedom when it comes to adding door heights to the rooms in your home.
How to measure for a door jamb replacement?
A good rule of thumb is to start from top to bottom, making sure to measure everything along the way. This includes the height, width, thickness, door jamb width, and the size of the frame you are going to replace.
What is standard door size?
While years of evolution have brought the millwork industry to a general agreement on the sizes of exterior entry doors, it should be noted that our use of the term “standard door size” refers to the most common size—there is no precise standardized measurement.
Standard door sizes for entry doors
Entry doors are often used in various applications, such as a front door, back door, door between the garage and house, hinged patio doors, etc. This creates a variety of standard door sizes. While the most common width is 3/0, there are also a variety of sizes that are commonly used.
Prefit Size
When considering standard door sizes, keep in mind that wood doors typically come labeled as a larger size than their fiberglass or steel equivalent, because the edges will need to be beveled before installation.
What to consider when choosing a door size
When choosing a door size, it’s important to consider the size of your existing opening. A prehung door unit that is slightly too small can be accommodated during installation, where a too large unit cannot. The next thing to consider is the entry size and the configuration of the door unit.
What are the dimensions of a door?
Here’s the list. Click the following for dimensions of the indicated types of doors: 1 Front door dimensions and sizes 2 Interior door dimensions and sizes 3 Garage door dimensions and sizes 4 French door dimensions and sizes 5 Sliding door dimensions and sizes 6 Pocket door dimensions and sizes
How long does a roof last?
As the old saying goes, you get what you paid for. It is worth remembering that a roof renovation is an investment; you want this to last your house 20-25 years.
How old is a roof?
Below are a few things to take into consideration when determining if you need a new roof: The roof is 20-25 years old (or older) There are water leaks in the roof. There is visible damage or cracks to the shingles. There is a sag in the roof. Mold has made its way into the structure.
What is the standard door size?
As you can see, the standard exterior door size rough opening is a full 2 ¼ inches wider than 36 inches and 2 1/8 inches higher than 80 inches. Keep this in mind.
How wide is a standard exterior door?
So the best standard exterior door sizes are in width from 36 inches to 42 inches and for double doors they are from 72 inches to 84 inches. The height of these entryways are typically 80 inches but can be as much as 84 inches to even 96 inches.
How big is a 72 inch double door?
For a 72 inch double door (this is two 36 inch doors) the basic pre-hung size will be about 74 inches by 81 5/8 inches. The rough opening size is 74 ¾ inches by 82 1/8 inches.
How wide is a 36 inch door with two 14 inch sidelights?
Sidelights typically come in 12 inches or 14 inches in width. So a single 36-inch door with two 14 inch sidelights is a nominal 64-inch width. The height is the same as with a single door.
What is the width of a prehung door?
The proper exterior pre-hung door is based on even more factors. The standard jamb width is 4 5/8 inches. However, there are times when the jamb is wider and you will need to order a jamb extension for your standard pre-hung door.
What is the width of a single exterior door?
Typical single exterior doors should be what is known as a 36 x 80 door. Some of the side or back doors may be smaller in width down to 32 x 80.
What size is a rough opening?
These two measurements are your rough opening size. If you have something other than 38 ¼ inches x 82 1/8 inches (or extremely close) you may not be able to shimmy your way through this.
What is the average size of a commercial garage door?
The most common commercial garage door sizes have 24’1” height and 32’2” width. The size largely depends on the truck sizes that will go into the garage (it’s better to take measures of the largest possible truck). The number of trucks is also important.
What is the best measurement for a garage door?
The width and height of existing garage door opening. These are the most important measurements. The room for drive through depends on the width and height of the opening, so pay attention to it. This also determines the size of the door you’ll need.
How much headroom does a sectional garage door need?
Sectional garage doors require 90 mm on each side of the opening to install. To function properly, it also needs around 100–210 mm of headroom above the top door’s panel.
How big is a sectional garage door?
Third. Given that the sizes of sectional garage doors are very flexible, the only limit is the maximum available size. Today, the largest available domestic sectional doors are 9.8’ high and 24.6’ wide.
What do you need to know about a garage door?
In most cases, all you need to know is the height and width of the garage opening. Although, there’s one thing to keep in mind. Measurements do differ depending on how exactly you want to install the door. An up and over garage door has an inner frame and operating gear.
How wide should a garage door post be?
This measure requires up to 3.75” on each side. If you’re dealing with a double garage door, make a 10” wide center post.
How many categories of garage doors are there?
Speaking of standard sizes of the residential garage doors, we can roughly divide them into 3 categories. The size of the door depends on what purpose it will serve. So, here are those categories: