A push-cart spreader is the easiest and most efficient way to apply the Scotts Turf Builder, but you can also use a handheld spreader. Refer to the manufacturer's instructions for rate of application as it differs based on the spreading method used.
How much time between applications of Scotts Turf Builder?
Scotts Turf Builder Lawn Food can be applied every six to eight weeks for a total of four applications each year, advises Scotts. The company recommends using a Scotts spreader to apply the fertilizer, but any fertilizer spreader should work well. Apply the fertilizer evenly across your lawn at the rate recommended on the product label.
When to apply Scotts Triple Action?
Scotts Turf Builder Triple Action is for use on the bermudagrass, bahiagrass, centipedegrass, kentucky bluegrass, perennial ryegrass, tall fescue, and fine fescue. Fertilizer Analysis (N-P-K): 25-0-2.
How to apply Scotts starter fertilizer?
Materials
- Generally, any high-quality, complete fertilizer that contains at least nitrogen and phosphorus will work as a starter. ...
- On high phosphorus soils an N only starter will usually provide similar starter response without adding extra P to an already high P soil.
- Many different fertilizer analyses can be used as starters. ...
When to apply Scotts fertilizer to a lawn?
Winter Lawn Care Tips
- Aerate & Fertilize. Just before your area’s first expected frost date, head out to your lawn and aerate. ...
- Keep Your Lawn Clean. There’s a good chance that leaves have piled up on your lawn during fall and because of that your lawn could suffocate before winter.
- Avoid Too Much Lawn Traffic. ...
- Treat Ice Wisely. ...
- Prepare While You Can. ...
How do you apply Scotts Turf Builder without a spreader?
If you have no other way to do it, you can certainly spread it by hand. Just make sure to use gloves and apply it very carefully. Walk backward, throwing fertilizer out as you go in a sweeping motion. Of course, you can use water-soluble or liquid fertilizers with a hose too.
Can I spread Scotts Turf Builder by hand?
Answer: The product label for Scotts Turf Builder Bonus S Southern Weed and Feed 2 does specify that the product should not be applied by hand or in a hand-held device. This restriction may be in place to limit the risk of exposure for the applicator, such as skin contact.
How do you apply Turf Builder by hand?
1:122:19How to Fertilize Your Lawn by Hand - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake a second pass over the entire lawn again to evenly distribute the second half of the fertilizerMoreMake a second pass over the entire lawn again to evenly distribute the second half of the fertilizer. Water the entire lawn area well to wash the fertilizer off the blades. And down to the thatch.
What is the best way to apply Scotts Turf Builder?
0:061:05How to use Scotts Turf Builder Triple Action Southern & UltrafeedYouTubeStart of suggested clipEnd of suggested clipOnce your spreader is full just roll it at a moderate place to spread the granules evenly all youMoreOnce your spreader is full just roll it at a moderate place to spread the granules evenly all you need to do is roll it around to spread the granules all over your entire yarn.
How do you use Scotts Turf Builder with hand spreader?
Hold spreader over pavement when filling. Sweep up any spilled product. Adjust spreader selector settings. Pull trigger and turn crank clockwise while walking at normal speed across area to be covered with product.
Can you apply fertilizer with a hand spreader?
Using a hand spreader isn't difficult. If you can walk the entirety of your yard, you can easily use this device to disperse seeds or fertilizer.
Can you touch fertilizer with your hands?
Touching the fertilizer may cause skin irritation, and ingesting it may be poisonous. Nitrates are the ingredients that cause the poisoning. Nitrates are a form of nitrogen that plants can easily absorb. Nitrogen is essential for plant growth, but it can be very dangerous when present at high levels in humans.
Will Scotts Turf Builder burn my lawn?
Scotts® granular Lawn Foods are slow-release products, meaning the nutrients are released slowly to the lawn. Microbes in the soil are able to break down the nitrogen in the particles over time, thereby releasing nutrients slowly and steadily over a6-8 week period, which means no lawn burn.
Does Scotts Turf Builder need to be watered in?
After applying Scotts® Turf Builder® Weed & Feed₃ you don't water your lawn for at least 24 hours. Just like rain, watering your lawn after applying Scotts® Turf Builder® Weed & Feed₃ washes the weed control particles off of weed leaves before they can fully work.
How long does it take for Turf Builder to work?
Scotts Turf Builder Weed and Feed does two things at once: feeds your yard and kills weeds. You will begin to see a greener, healthier grass in 1–5 days, with full results in 4–6 weeks. On the weed control front, Scotts will begin to kill weeds within 7 days but will show complete results in 14 days.
Can you apply Scotts Turf Builder on wet grass?
Can I apply fertilizer to a wet lawn? Most Scotts® fertilizers can be applied to either a wet or dry lawn. If you're applying a weed-and-feed product like Scotts® Turf Builder® Weed & Feed, though, you may need to apply to wet grass to help the particles adhere to the weeds for best results.
What month do you apply Scotts Turf Builder?
In Spring: Apply Scotts® Turf Builder® Annual Program Spring To help your lawn continue to thrive during the spring and kill pesky broadleaf weeds, apply Scotts® Turf Builder® Annual Program Spring between April and June, but at least 6 to 8 weeks after applying the Early Spring product.
What is Scotts Turf Builder?
This is a type of lawn fertilizer applied to make grass and dense and greener. It is effective on any type of grass even for greening and feeding. This plant food has been formulated well with Scotts All-In-One Particles technology that offer your lawn with the following benefits:
When should you apply Scotts Turf Builder?
You can feed your lawn with Scotts Turf Builder every season of the year for better growth of your grass.
How to apply Scotts Turf Builder on your Lawn
Here are simple steps that will guide you on how to apply Scotts turf builder:
When should I put Turf Builder on my lawn?
Scott’sTurf Builder can be applied when the grass is wet. The temperature can be between 65 and 90 degrees. It’s best to apply it when the weeds are in the grass.
Can you apply Scotts Turf Builder before rain?
Is it possible to applyfertilizer to a lawn that is wet? Scotts® can be applied to both a wet and dry lawn. If you apply a weed-and-feed product like Scotts®Turf Builder® Weed & Feed, you may need to apply to wet grass to help the particles adhere to the weeds.
Should I use Turf Builder before or after mowing?
It is a good idea to mow a few days before applying weed and feed and then wait a few days after applying to mow again. The time it takes for the herbicide to be absorbed through the leaves of the weeds is ensured by this.
What temperature can you apply Scotts Turf Builder?
Scotts WinterGuard Fall Lawn Food helps repair damage caused by summer heat, while preparing roots for harsh winter weather. This will allow grass to use water more efficiently.
When to use Scotts Turf Builder?
You can use Scotts Turf Builder to improve your lawn in the spring, summer or fall. Many homeowners choose a twice-a-year application in the spring and the fall due to the intense heat of the summer. If you live in an area with a milder climate, then a spring and late summer application might be better for you.
Can Scotts Turf Builder stain?
Sweep sidewalks, driveways and decks to remove any Scotts Turf Builder that scattered onto them. Scotts Turf Builder can stain the surface. Pets can immediately walk on treated grass, but you may want to water the lawn to prevent them from tracking in fertilizer on their feet.
How to use
Apply to a wet lawn on a calm day. After 24 hours, water the lawn to wash particles onto the soil. For best results, apply using a Scotts® spreader.
Where to use
For use on Kentucky Bluegrass, Perennial Ryegrass, Tall and Fine Fescue, Bermudagrass, Centipedegrass, Bahiagrass, and Zoysiagrass.
Where not to use
Do not use on St. Augustinegrass (including Floratam), Dichondra, Lippa, Carpetgrass, or Bentgrass.
When to apply
For spring application, apply when daytime temperatures are consistently between 60°F and 80°F and dandelions are actively growing. Apply before the 3rd or 4th mowing of the year. A fall application may be made to control fall-germinating winter weeds and cool season perennial weeds such as dandelion and clover.
How often to apply
Do not apply this product more than twice a year. Allow at least 2 months between applications of this product.
Our Environment
To protect the environment, do not allow product to enter or run off into storm drains, gutters, sewers or drainage ditches.
Guarantee
Scotts® No-Quibble Guarantee: If for any reason you, the consumer, are not satisfied after using this product, you are entitled to get your money back. Simply send us evidence of purchase and we will mail you a refund check promptly.
