Asphalt driveway paving cost
| Size | Square feet | Average cost |
| 10’x20’ Driveway (1-car) | 200 | $600 – $1,400 |
| 12’x24’ Driveway (1-car) | 288 | $850 – $2,000 |
| 20’x20’ Driveway (2-car) | 400 | $1,200 – $2,800 |
| 24’x24’ Driveway (2-car) | 576 | $1,700 – $4,000 |
How much does asphalt cost per square foot?
Asphalt cost: $4.00 per square foot. This can vary depending on how thick it’s applied and the region in which you live. Special features: The calculator above assumes the cost of a Chip Seal top coat, stamped surface or color asphalt at $4.00 per square foot. This is probably a tad on the high side, but is within range.
How much does asphalt paving cost per sqft?
There are many factors that affect the asphalt paving costs per square foot including: Asphalt paving costs per square foot range between $2.50 to $4.00 per square foot. The bigger your driveway the more materials will be needed. Uniquely shaped driveways require more work to cover than straightforward parking spaces.
How much does it cost to lay asphalt?
They have a range of associated costs, depending on the asphalt type, dirt or soil you are paving over, and your driveway’s slope. Asphalt costs between $1 and $5 a square foot for the material uninstalled, with installation costing another $4 - $13 /sq.ft. if the conditions are favorable.
What is the average price of asphalt?
"And, it was a brick street underneath, so it uses more asphalt. The cost is maybe $200, or 15 to 20% of the total cost." Morehead said suggestions from the public and council members for the second list may have elevated two or three short streets onto ...
Is it cheaper to use asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How much does it cost to pave 900 square feet?
Asphalt paving costs $3 to $7 per square foot on average. Asphalt materials and installation labor costs $2 to $4 per square foot, plus basic excavating and installing a gravel subgrade costs $1 to $3 per square foot. Adding colors, patterns, curbs, or sidewalks cost extra.
How much will a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
How many tons of asphalt are in a dump truck?
A typical tandem dump truck is limited to about a 13-ton payload in accordance with federal bridge law. Increased truck capacity is important when directly unloading into the asphalt paver.
What is the asphalt price index?
2022 State IndexesStateJanMarCalifornia$404.70$507.20Colorado$436.23$628.91Connecticut$512.50$578.00Delaware$545.00$605.0042 more rows
How many tons is a square yard of asphalt?
There are approximately 0.5 cubic yards in a ton of asphalt. 1 cubic yard of asphalt weighs around 4,050 pounds and 1 ton of asphalt weighs about 2,000 pounds, so, number of yards of asphalt in a ton = 2000 ÷ 4050 = 0.5 yards approx. Thus, there are 0.5 cubic yards in one ton of asphalt.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How do you quote asphalt?
To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
How do you figure square footage for asphalt?
How to Calculate Asphalt TonnageUse a tape measure to determine distances. ... Convert the length, width and height measurements to feet by dividing by 12, since each foot contains 12 inches. ... Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved.More items...
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to remove asphalt?
Cost to remove an asphalt driveway. The average cost to remove an asphalt driveway is $1 to $3 per square foot , depending on the thickness. This price includes demolishing and hauling away old asphalt. The gravel sub-base may stay in place after removing the old asphalt if it's in good condition.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How old is a driveway for asphalt resurfacing?
Asphalt resurfacing is best for driveways less than 15 to 20 years old with good foundations that have widespread yet shallow cracks.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to resurface an asphalt driveway?
Resurfacing an asphalt driveway costs $1 to $3 per square foot compared to replacing at $4 to $10 per square foot. Resurfacing a 2-car (20’x20’) asphalt driveway costs $400 to $1,200, while a complete replacement costs $1,600 to $4,000 on average.
How Much Does an Asphalt Driveway Cost?
The average cost for an asphalt driveway is $4,996, but that will vary depending on several factors, including the size of your driveway, how deep of a layer of asphalt you want for your driveway, and even the type of asphalt.
How much does it cost to install an asphalt driveway?
A professional asphalt driveway installation will run you an average of about $5,000, while DIY could cost you under $1,000 if you have a small enough driveway.
How many square feet does 1 ton of asphalt driveway cover?
Keep in mind that 1 ton of asphalt gives you 80 square feet at a 2-inch thickness and 40 square feet at a 4-inch thickness.
How many tons of driveway is needed for a 4 inch driveway?
A 2-inch thick driveway will require 1 ton per 80 square feet. A 4-inch thick driveway will need 1 ton for every 40 square feet. Let’s test this out on some common driveway sizes:
What is the base layer of a driveway?
The base layer is your driveway’s foundation. Often made of gravel or similar materials, the sub base provides a sturdy surface on which to lay asphalt and protects your driveway from damage caused by freezing and thawing.
How much does it cost to stamp asphalt?
Stamped asphalt typically costs between $12 and $17 per square foot. Here is what you can expect to pay to get the whole driveway done with decorative asphalt.
What are some outdoor services that are included in an asphalt driveway?
Other outdoor services are often bundled with the installation of an asphalt driveway. Most of these additional services (tree removal or land grading, for example) involve preparing the land for your driveway.
New Roof Cost Considerations
As you might expect, there are loads of different options when it comes to a new roof. The most common choice in Atlanta is a standard architectural shingle that will last about 30 years and come at a fraction of the cost of other options like metal roofing.
Cost Of Asphalt Roofing Materials
The first thing to consider when calculating your asphalt roofs replacement cost is the cost of materials. Luckily, asphalt is the most affordable roofing option, even more affordable than wood and metal. You should expect to pay between $150 and $700 per square for materials, depending on the type of asphalt roof shingles.
Which Should I Use To Re
Asphalt, wood or slate are the preferred material for steep rooftops. However, when re-shingling a hip/steep one, consider the type of shingles that were used previously. Using a material of comparable weight and quality can help ensure that the structure is designed to support the new weight.
Asphalt Shingle Cost Per Bundle
Another option for purchasing asphalt shingles is to buy them in bundles. These packs contain enough roofing material to cover 33.3 square feet of the roof or of a square.
What Is Rubber Roofing
Rubber shingles are made from a single-ply synthetic material we know as ethylene propylene diene monomer.
Aluminum Shingle And Shake
An aluminum roof designed for residential use will have concealed fasteners, interlocking panels and PVDF coatings. Accessories and trims will be factory-formed for quality and consistency. When reflective pigments are used in the paint formula, it is the most energy efficient option and classified as a cool roof.
Pitched Roofs Vs Flat Roofs
Flat roofs are on average less expensive than pitched ones. The latter is more difficult to clean. Its also harder to spot damage, especially towards the top, for pitched roofs. These realities often sway homeowners towards flat roofs.
What Is The Average Cost To Asphalt Driveway?
Driveway size and labor will largely determine your asphalt driveway price, but there are other cost factors that can certainly tip your asphalt driveway installation cost in the wrong direction.
What Is The Cost Of Paving A Driveway With Asphalt?
When your landscape fits well with your driveway, it makes the entry point into your house good looking. A driveway might be perceived to be expensive, but in this article, we will explore the cost implication of an asphalt driveway.
When Did They Start Paving Streets With Asphalt?
According to Tilson, says that the Carthaginians (about 600 B.C) located in present-day Tunisia are the first to construct and maintain a good driveway system. Then followed by the Romans who practiced a military road system that connected camps. It was recorded that the Romans built an estimated 87, 000km of roads throughout its existence this is about the length of the U.S interstate system.
What is the mix of asphalt and sand?
Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.
What is the constituent of asphalt?
A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.
How long does asphalt last?
Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...
Why does pavement cool faster than normal?
When pavements cool faster than normal, it will not attain the required density it needs to bind together so that water its major enemy will not penetrate through the pavement layers leaving it also with a rough surface.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How long does a concrete driveway last?
A concrete driveway can last for 30 years, while an asphalt drive is expected to last for 20 years.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
Is a straight driveway cheaper than a curved driveway?
A straight driveway is easier to install than a curved or circular drive. A larger driveway will usually cost less per square foot, but have a higher overall cost than a smaller driveway. Lastly, accessibility must be considered. If the driveway is difficult to access, it will cost more to install.
Is concrete more expensive than pavers?
Poured concrete is more common and less expensive. A concrete slab is poured and then allowed to dry. Designs can be stamped in the wet concrete, or color can be applied. A paver driveway offers a beautiful drive at a cost. It comes ready to install in individual pieces, similar to bricks, but made from concrete.
Is an Asphalt Driveway Right for You?
Asphalt driveways are often compared to the concrete driveway due to their similarities. Asphalt is preferable in many instances.
How much does it cost to install asphalt?
Materials cost from $2 to $6 per square foot and installation costs $5 to $7 per square foot. Excavation, added curbs, or a sidewalk are extra costs. The national average for an asphalt driveway runs $4,737 but the overall cost can vary due to geographical location, the size of the area, labor, and asphalt type.
How much does it cost to excavate a driveway?
Excavating land can cost between $1,500 to $5,100, depending on the number of cubic feet that needs to be moved. Grading, or leveling the area to make your driveway smooth and well-drained, costs between $5 and $10 per square foot for professional graders, but steep driveways may cost more.
How many square feet does a ton of concrete cover?
One ton can cover about 40 to 80 square feet, and the total amount needed depends on the thickness of the layers. A driveway 2 inches thick can run 80 square feet per ton, and a 4-inch-thick driveway can run 40 square feet per ton. An average driveway will need 7.5 to 15 tons.
How much does a heated driveway cost?
A heated driveway usually costs $12 to $25 per square foot, depending on whether it’s new or a replacement. For the average home, the cost will be between $7,200 to $15,000.
What is the best way to drain a driveway?
Porous Asphalt. If you live in a rainy climate and want to make sure the driveway drains properly, porous asphalt is the best choice. Rather than staying on the surface and running off, water drains through the asphalt. A layer of crushed stone is added under the asphalt to assist with the draining.
How much does it cost to install an electric gate on a driveway?
The average electric gate installation is around $7,000.
How much does labor cost for a driveway?
Labor costs from $5 to $7 per square foot. The size and scope of the project will impact how many hours will be required to complete the project. Labor costs may be higher if the driveway is on a hill or has curves, or if additional services like tree or stump removal are needed. Flat land makes for an easier and less expensive process.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.
Material Cost For Fiberglass Woven Shingles
The material cost for asphalt coated woven fiberglass shingles runs $0.75 to $1.25 per square foot or $75 to $125 per square. These fiberglass woven shingles are typically lighter and thinner compared to organic mat shingles and interestingly carry a longer warranty.
Material Cost For Organic Mat Shingles
The material cost for organic mat shingles runs $1.25 to $1.75 per square foot or $125 or $175 per square. These mats carry a shorter warranty than the woven fiberglass option due to the fact that they tend to absorb water over time because they are made out of organic materials.
Installation Pricing
Installation pricing for asphalt roofing will run $2 to $4 per square foot. Labor costs on shingles are on the low side because the material is light and can be easily installed. If the existing material must be torn off before the shingles can go on then this will add perhaps $1 psf to the cost.
Completed Fiberglass Woven Roof
The completed cost of a fiberglass woven is $2.50 to $4.50 per square foot. Find additional roof pricing per square foot. -- Total Project Cost: $2.50 to $4.50 psf installed --
Completed Organic Mat Shingled Roof
The completed cost of organic mat shingles is $4.50 to $6 per square foot. Try our roof price calculator for more cost combinations and information. -- Total Project Cost: $4.50 to $6 psf installed --