Asphalt paving runs $7 to $13 per square foot, including materials and installation. If you're paving a typical driveway measuring about 600 square feet, you can expect to pay $4,200 to $7,800.
Full Answer
How much will it cost to resurface my asphalt pavement?
How much will it cost to resurface my asphalt pavement? Cost to Resurface Asphalt Driveways Resurfacing costs approximately $2.25 per square foot. Patterns and colors cost more—around $4 to $8 per square foot.
How to calculate asphalt cost?
Input:
- First, select one of the five options from the drop-down menu to calculate or calculate with Length, width, area, volume, density, thickness, and dirt need to remove.
- After selecting the required field, enter the values with corresponding units from the drop-down list.
- Hit Calculate button.
How much does asphalt cost per square foot?
Asphalt cost: $4.00 per square foot. This can vary depending on how thick it’s applied and the region in which you live. Special features: The calculator above assumes the cost of a Chip Seal top coat, stamped surface or color asphalt at $4.00 per square foot. This is probably a tad on the high side, but is within range.
How much does it cost to replace an asphalt driveway?
Asphalt Driveway Replacement vs. Resurfacing. Asphalt resurfacing costs $3 to $7 per square foot compared to $8 to $15 per square foot for replacing.The ideal choice depends on the condition of your existing driveway. If your driveway is in relatively good condition with no potholes, resurfacing can save you $5 to $8 per square foot.If it’s more than 15 years old or in poor shape ...
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
Is it cheaper to pour asphalt or concrete?
Cost. The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
How do you quote asphalt?
To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
Is asphalt the same as blacktop?
Blacktop is heated to approximately 150 degrees celsius, whereas asphalt is only heated to 120 degrees celsius. Asphalt is has a higher bitumen content and for that reason is less porous and more resilient to wear and tear from high traffic and thus is the preferred choice for major highways.
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
Can asphalt be put over concrete?
If the question is "CAN I lay asphalt over concrete?" then the answer is "Yes." This is absolutely possible if elevations allow for it, and we're happy to lay asphalt driveways over concrete if that's what you want. It's also the cheaper option since heavy equipment is required to dig up an existing concrete slab.
What type of driveway lasts the longest?
ConcreteConcrete is the old standby for driveways. Most suburban homes opt for this material for two big reasons: Concrete is typically the longest-lasting driveway surface, and, if installed properly, it is practically maintenance-free.
How thick should a asphalt driveway be?
2 to 3 inchesResidential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
What is the asphalt price index?
2022 State IndexesStateJanMarCalifornia$404.70$507.20Colorado$436.23$628.91Connecticut$512.50$578.00Delaware$545.00$605.0042 more rows
How much does a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How much does an asphalt driveway cost per square foot?
At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet. "Provided it's installed properly, including a stable base, and is well-maintained over time, an asphalt driveway should last twenty years or longer.".
How much does it cost to seal asphalt?
Stamped or colored asphalt costs $12 to $17 per square foot for the entire surface. If you only need the top coat, you’ll pay $5 to $10 per square foot. Asphalt in a unique shape or color adds interest to your property. In most cases, you’ll want to seal it to keep it in good condition for longer.
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,746 on average, with a typical range between $2,935 and $6,567 . This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include:
How much does asphalt overlay cost?
Asphalt Overlay Cost. Asphalt overlay costs $3 to $7 per square foot for standard materials. This project, often called a “top coat,” runs less because it involves a thinner layer on top of an existing surface. Asphalt sealant costs about $500, and should be done at least 6 months after the top coat.
How much does it cost to pave a 100 foot path?
Paving a 100-foot asphalt path costs $1,750 to $3,250. The average pathway is about 30 inches wide. Designs with complicated curves increase the total because they add to the square footage.
How much does reclaimed asphalt cost?
Recycled or Reclaimed Asphalt. Recycled or reclaimed asphalt costs $10 to $20 per ton, compared to $100 to $200 per ton for new. This can save you $675 to $1,350 on materials for a driveway, if it’s available in your area.
How many square feet does a ton of asphalt cover?
One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
How is asphalt measured?
Asphalt is measured by the area, by depth, and converted to a measurement of weight. The weight, represented in tons, is also the measurement used in purchasing asphalt. Mobilization, traffic control, and quotes from subcontractors will each be represented as a lump sum. In public works projects, the contractor usually provides unit prices to ...
What is equipment cost?
Equipment costs are typically developed internally on a per hour basis to cover maintenance and depreciation or based on rental rates. Labor and equipment costs are often used in tandem within a crew cost. Subcontractor costs for portions of work will be obtained by requesting quotes.
What is external cost?
External costs are those quoted by suppliers. In both cases the estimator is responsible for ensuring that the material quoted meets the project’s specifications. Labor costs are established rates based upon labor base plus burden on a per hour basis.
What are the factors that determine the take off and pricing of a project?
Some factors vary from project to project and are detailed in the plans and specifications, arising from sources such as: Project size and constructability: Economies of scale. The project may call for a product or method not economically procured or performed.
Is profit a percentage of overall estimate?
Profit, typically as a percentage of the overall estimate, will need to be considered. Should there be any conservatism built into the estimate it should be included in the profit and not estimated costs; this is crucial in order to evaluate project success on an “apples-to-apples” basis.