How much will it cost to resurface my asphalt pavement?
How much will it cost to resurface my asphalt pavement? Cost to Resurface Asphalt Driveways Resurfacing costs approximately $2.25 per square foot. Patterns and colors cost more—around $4 to $8 per square foot.
How to calculate asphalt cost?
Input:
- First, select one of the five options from the drop-down menu to calculate or calculate with Length, width, area, volume, density, thickness, and dirt need to remove.
- After selecting the required field, enter the values with corresponding units from the drop-down list.
- Hit Calculate button.
How much does hot mix asphalt cost?
Hot-mix asphalt costs $40 to $80 per ton (2,000 pounds), and minimum orders are typically 2 tons. Bag of asphalt cost A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth.
How much does paving an asphalt driveway cost?
To know how much the asphalt paving of a driveway costs, two things need to be considered: the area to be covered and the quality of the material. The price of asphalt generally ranges between $ 4 and $ 12 per square foot. Paving a concrete driveway is a bit more expensive than asphalt.
How thick should an asphalt overlay be?
A conventional asphalt overlay is at least 2 inches thick. This will vary based on the damage to the existing asphalt surface, however. The more damage there is to the existing asphalt, the thicker the overlay will need to be. The thickest overlays are referred to as structural overlays.
How long do asphalt overlays last?
about 10-15 yearsIf an overlay is desired, there has to be an expectation of the customer that this method is not as long-lasting as a full removal and replacement. A 15-20 year life on a removal and replacement is common, whereas an overlay may last a shorter time, about 10-15 years.
What is considered asphalt overlay?
An asphalt overlay is, essentially, a patch job done on a stretch of asphalt. This is the usual method when asphalt is showing some cracking or potholing, while still not being damaged enough to need replacement.
How much does it cost to top coat asphalt?
Sealing and Maintenance Asphalt sealing typically costs $3 to $7 per square foot. This top coat costs less because it's a thin layer on top of an existing surface. Asphalt sealant costs about $500 and should be done at least 6 months after the top coat.
Is asphalt overlay a good idea?
An Asphalt Overlay Only Fixes Surface Issues A typical layer of asphalt is 1.5 inches thick. However, a new layer of asphalt won't do you much good if the surface beneath it has problems. If your driveway currently has cracks, dings, or other signs of asphalt damage, those cracks and dings will eventually reappear.
Can you put a layer of asphalt over old asphalt?
An overlay or resurface can be used on an asphalt driveway, parking lot, or road way. It consists of installing a new layer of asphalt over the existing asphalt and grinding at the transitions (i.e. sidewalks, garages, drains, curbs, or other asphalt points).
What is the difference between resurfacing and overlay?
Generally “overlay” is defined as the placement of a surface course on top of the existing pavement at an exact depth (without any wedging). “Resurfacing” is also an overlay process, but may include additional variable depth(s) of pavement wedging layers.
How is asphalt overlay done?
How is an asphalt overlay constructed? This depends on the project, but usually the first process involves milling. A machine known as an asphaltic mill will “shave” the top of an asphalt surface down to enable the new asphalt to match existing asphalt, curb and gutter, sidewalks, or concrete pads.
How do you overlay asphalt?
3:585:19Asphalt Overlay Process - S&G Asphalt Services - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe will set our paver to a zero inch thickness. Then we simply glide over the top of the entireMoreWe will set our paver to a zero inch thickness. Then we simply glide over the top of the entire driveway with new asphalt filling. In all of the low sunken-in.
Is asphalt sealing worth it?
Yes, it is a necessity as you need to protect your valuable asset. If you want your driveway to last, seal coating is the way to go. Unprotected asphalt leads to cracks and potholes that can severely damage your foundation.
How much does it cost to top coat a driveway?
Cost to Sealcoat Asphalt Driveways The average cost for a contractor to sealcoat your asphalt driveway is $0.17 to $0.24 per square foot. Driveways measuring 480 square feet cost $80 to $115 to sealcoat. Larger driveways cost $170 to $240 to sealcoat. Cost ranges may vary by contractor and region.
Should I resurface or replace my asphalt driveway?
Resurfacing is best for driveways that are aging or have more than 25% of the surface covered in light to moderate damage. If you resurface the entire driveway, it will look brand new. Replacing the driveway is necessary if your driveway has large potholes or several cracks wider than 1/4-inch.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to remove asphalt?
Cost to remove an asphalt driveway. The average cost to remove an asphalt driveway is $1 to $3 per square foot , depending on the thickness. This price includes demolishing and hauling away old asphalt. The gravel sub-base may stay in place after removing the old asphalt if it's in good condition.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How old is a driveway for asphalt resurfacing?
Asphalt resurfacing is best for driveways less than 15 to 20 years old with good foundations that have widespread yet shallow cracks.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to resurface an asphalt driveway?
Resurfacing an asphalt driveway costs $1 to $3 per square foot compared to replacing at $4 to $10 per square foot. Resurfacing a 2-car (20’x20’) asphalt driveway costs $400 to $1,200, while a complete replacement costs $1,600 to $4,000 on average.
How much does it cost to remove asphalt?
Removing or milling the top layer of asphalt costs $0.25 to $0.75 per square foot. Milling before resurfacing creates a uniform pavement depth in severely damaged asphalt. Milling also levels new paving with the surrounding apron, sidewalk, and garage transitions.
How much does it cost to resurface an asphalt driveway?
Stamping, patterns, or colored asphalt resurfacing costs $3 to $8 per square foot. The average cost to resurface an asphalt driveway is $400 to $1,800, depending on the blacktop size and condition.
What is driveway resurfacing?
Driveway resurfacing is pouring a new asphalt overlay 1.5" to 2.0" thick over the old layer. Contractors patch cracks and holes or grind off the top layer to remove all damage. Then they spread and compact new asphalt with a machine roller. Resurfacing is cheaper than repaving.
How long does asphalt last?
Asphalt resurfacing lasts 8 to 15 years on average. However, a newly reconstructed asphalt pavement lasts between 20 and 30 years with proper maintenance. Resurfacing is only a long-lasting solution when the original pavement foundation is strong.
How much does it cost to resurface concrete?
Resurfacing concrete with asphalt costs $1 to $3 per square foot but requires a stable concrete base and expansion joints.
How long does a resurfacing last?
The resurfacing lifespan depends on traffic, climate, subgrade condition, level of maintenance, and thickness.
How much does stamped asphalt cost?
Colored or stamped asphalt overlays cost $3 to $8 per square foot total. Stamped asphalt mimics the look of stone or brick pavers. After resurfacing, contractors compact a wire template onto the hot asphalt. Coloring is either a surface coating or colored-rock paving additive.
How much does asphalt cost?
The cost of asphalt ranges from $3 to $5 per square foot , including labor. [2] It is easier to get a better idea of the total cost when you calculate it in tonnes, however, and that is how these calculations will be carried out.
How much does it cost to install asphalt driveways?
Asphalt driveway installation pricing across the country can be anywhere from $1,500 to $10,000, but most spend $4,000 to $8,000. The amount varies depending on such factors as the cost of labor and the general difference between pricing in different states. The amount of differing figures can be overwhelming.
How Much Does a Driveway Cost?
The national average cost of an asphalt driveway is close to $4,500. [1] The price can rise or fall depending on many factors including location, quality of material, depth of material required, and the size of your drive.
How many square feet does a ton of asphalt cover?
One ton of asphalt will cover 26.66 square foot of driveway at a 6-inch depth. You find out the square footage of your driveway by just multiplying the length by the width. The square footage in this example is 20′ times 40′, which equals 800 square foot.
How thick is a driveway?
In general a 4″ thick asphalt layer is suitable for most driveways, but 5-6″ is recommended to support heavier vehicles and loads. [3]
How much does labor cost?
Labor Costs. The cost of labor for general contracting work is usually between $40 and $55 per hour . Labor rates differ around the country, and some homeowners may know someone in the industry who may offer a reduced price. However, regarding averages, it is best to assume that labor will cost around $40 per hour .
Can you use topsoil as a base?
Never use topsoil as a base for any structures which require stability. Topsoil is the soil you use for flowerbeds. The type of soil you need to prepare your new driveway with should be as free of organic compounds as possible. It is also known as ‘fill dirt’.
How much does asphalt cost?
Asphalt material costs $100 to $200 per ton. The average driveway uses about 7.5 to 15 tons. If you’re having it installed new, you’ll pay $7 to $13 per square foot.
How much does it cost to repair asphalt?
If it needs a little work beforehand, asphalt repair costs $1 to $4 per square foot of the damaged area. Asphalt replacement costs $8 to $15 per square foot. You may need to take this approach if it has considerable damage.
How much does a tar and chip driveway cost?
Tar-and-chip driveways cost $2 to $5 per square foot. This style is like asphalt but includes stones in the surface layer. Homeowners often choose it because it offers similar durability at a lower price.
How old should a driveway be to resurface?
If your driveway is 5 to 15 years old and you don’t have potholes, resurfacing may be the right choice. It’s still a complicated job that takes a lot of physical strength--and specialized equipment, so it’s best to hire a professional.
How much does it cost to resurface a concrete driveway?
The cost to resurface a concrete driveway runs $1,800 to $3,000, or $3 to $5 per square foot. Decorative overlays, like stamped or colored concrete, range from $7 to $20 per square foot.
How much does it cost to install a gravel driveway?
Gravel driveway installation costs about $1,500, ranging from $1 to $2 per square foot. This usually includes minor leveling and grading. If the land needs a lot of work to prepare, it can run $10,000 to $20,000 more.
How much does it cost to resurface a road?
By comparison, a 30-foot road ranges from $9,000 to more than a million, at $90 to $210 per linear foot.
How much does it cost to pave an asphalt driveway?
Paving an asphalt driveway costs $4,912 on average, with a typical range between $2,996 and $6,851 . This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot.
How many square feet does a ton of asphalt cover?
One ton usually covers 40 to 80 square feet. The amount you need depends on the thickness of the layers: 2 inches thick: 80 square feet per ton. 4 inches thick: 40 square feet per ton. For the average driveway, you’ll need 7.5 to 15 tons. "The complexity of the job itself weighs heavily on the price of an asphalt job.
How much does it cost to pave a 100 foot path?
Paving a 100-foot asphalt path costs $1,750 to $3,250. The average pathway is about 30 inches wide. Designs with complicated curves increase the total because they add to the square footage.
How much does it cost to stamp asphalt?
Stamped or colored asphalt costs $12 to $17 per square foot for the entire surface. If you only need the top coat, you’ll pay $5 to $10 per square foot.
How much does asphalt curbing cost?
Asphalt Curbing. Asphalt curbing costs $975 to $1,625. At $13 per square foot, curbs run more because of extra labor and a higher average thickness for the material. The width of the average residential lot is 75 to 125 feet.
How much does cold mix asphalt cost?
Cold mix asphalt costs $10 to $50 per bag, but you can only use it for temporary repairs. Cold mix isn’t designed for the whole surface because it lasts for one or two seasons.
How much does hot mix cost?
Hot mix asphalt costs $100 to $200 per ton. This is the standard type for all-weather surfacing and repairs. Cold mix asphalt costs $10 to $50 per bag, but you can only use it for temporary repairs. Cold mix isn’t designed for the whole surface because it lasts for one or two seasons.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How long does a concrete driveway last?
A concrete driveway can last for 30 years, while an asphalt drive is expected to last for 20 years.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
Is a straight driveway cheaper than a curved driveway?
A straight driveway is easier to install than a curved or circular drive. A larger driveway will usually cost less per square foot, but have a higher overall cost than a smaller driveway. Lastly, accessibility must be considered. If the driveway is difficult to access, it will cost more to install.
Is concrete more expensive than pavers?
Poured concrete is more common and less expensive. A concrete slab is poured and then allowed to dry. Designs can be stamped in the wet concrete, or color can be applied. A paver driveway offers a beautiful drive at a cost. It comes ready to install in individual pieces, similar to bricks, but made from concrete.
Is an Asphalt Driveway Right for You?
Asphalt driveways are often compared to the concrete driveway due to their similarities. Asphalt is preferable in many instances.
How much does asphalt resurfacing cost?
In general, asphalt resurfacing is cheaper than driveway replacement, which can cost business owners upwards of $10,000 (or more). Business owners typically pay per square foot of resurfacing. Prices vary from company to company, however, so we recommend requesting quotes from reputable providers to get started.
How much does it cost to resurface a driveway?
Most companies will charge business owners per square foot of resurfaced driveway. In general, business owners can expect to pay a minimum of $2.25 per square foot of resurfaced asphalt. A 1,000-square foot commercial driveway could thus cost, at a bare minimum, $2,250.
How long does asphalt last?
Remember that most asphalt driveways have a maximum lifespan of fifteen years. Most of these, especially commercial driveways, require repair as early as three years into this lifespan. If your driveway is “middle-aged” (seven to nine years old), resurfacing is likely in order.
How long does a driveway last?
Keep in mind that most asphalt driveways last for 12 to 15 years only. If you are constantly patching your driveway, it’s time to explore other options–for ...
Why do you resurface your driveway?
Resurfacing your asphalt driveway can ensure that customers keep coming through your doors. It can also save you money on future asphalt repairs, especially if your driveway is middle-aged.
What is asphalt cement made of?
It consists of rocks, sand, and liquid asphalt cement, a petroleum derivative. As durable and smooth as asphalt driveways can be, they still can sustain damage. This is especially the case for driveways that are heavily used by multiple vehicles. Weather can also influence the lifespan of asphalt driveways.
Can you patch a crack in asphalt?
At first, this can be a great solution for minor asphalt repairs. Patching in those potholes and cracks can ensure that appealing, smooth driveway surface.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.
