How much does paving an asphalt driveway cost?
To know how much the asphalt paving of a driveway costs, two things need to be considered: the area to be covered and the quality of the material. The price of asphalt generally ranges between $ 4 and $ 12 per square foot. Paving a concrete driveway is a bit more expensive than asphalt.
What is the average cost of a paved driveway?
You can expect to pay an average price of $2,392 to $6,514 for a paved driveway, with a national average of $4,447. Materials and installation usually cost $2 to $15 per square foot, but the labor...
How do you install asphalt driveway?
Steps
- Find a contractor. It's important to feel comfortable with the person you hire. ...
- Remove your current driveway surface. This might include breaking up existing concrete and removing the pieces or collecting loose gravel.
- Grade your driveway slope. ...
- Compact the base soil. ...
- Cover the base soil with crushed rock. ...
- Pack the crushed rock into the subsoil.
How do you calculate the cost of a concrete driveway?
Upgrading a gravel driveway to a concrete driveway:
- Grading the existing drive and removing some material, if necessary for proper height
- Installation and finish of 4-6 inches of reinforced concrete
- Application of sealer
- Cost: $3.40 to $5.25 per square foot using 4 inches of concrete
- Cost: $4.35 to $6.50 per square foot using 6 inches of concrete
How do you calculate the cost of an asphalt driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
Is 1.5 inches of asphalt enough for a driveway?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate.
How do you quote asphalt?
For example, a 10′ wide x 20′ long driveway with a depth of 3″ would be 50 cubic feet. To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
How much does a ton of asphalt cover?
Asphalt cost per ton One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness.
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
What is the best thickness for an asphalt driveway?
A 4-inch thickness may be adequate, but 5 or even 6 inches of full-depth asphalt will assure you of a stronger, stable driveway under a wider range of climate and loads. As an option, some contractors use 6 to 8 inches of compacted aggregate, or gravel, as a base under 3 inches of asphalt pavement.
What is the minimum thickness for asphalt?
2” thickAsphalt Thickness: Asphalt driveways need to be a minimum of 2” thick and are typically 3” (compacted).
How warm does it have to be to pour asphalt?
The best time of year to pave asphalt is during the spring and summer months because the best temperature for hot paving is generally 70 degrees Fahrenheit or higher. It's possible to lay asphalt at temperatures as low as 50 degrees, but doing so isn't likely to bring about the best results possible.
How do I calculate my driveway?
Measure the length of your driveway in linear feet. Measure the width of your driveway in linear feet. Multiply the length x width to calculate the total square footage of your driveway.
What is the asphalt price index?
2022 State IndexesStateJanFebCalifornia$404.70$460.70Colorado$436.23$526.01Connecticut$512.50$522.50Delaware$545.00$566.6742 more rows
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
How long does asphalt last?
You will need another tarmac calculator if the density differs significantly in your case. Most asphalt, hot mix asphalt included, has a lifespan of over 20 years if applied and maintained appropriately, and if it is not subject to significantly higher loads than it was planned for.
What is asphalt used for?
Asphalt is used for bituminous waterproofing products, where it is a part of roofing felt and is used for sealing flat roofs.
What can be added to hot mix asphalt?
Recycled polymers (e.g., rubber tyres) may be added to the hot mix asphalt to modify its properties depending on the intended ultimate application. Asphalt is usually sold by the tonne from companies specializing in construction, usually road construction and roof water-proofing.
What is the best mix for driveways?
Driveway Mix Asphalt. Cheaper mix that is tailored to use in driveways and parking lots. It includes crushed stone, sand and gravel. Porous Asphalt. It is designed only with crushed stone and a few grains of sand in the mix, making it permeable to water. More expensive, but removes the need for drainage.
How much is a ton?
The ton is currently only used in the United States and is equal to 2000 pounds (2000 lbs).
Is there more than one type of blacktop?
Contrary to what you may think, there is more than one type of blacktop, mainly depending on the temperature during mixing. Selecting the right type is important, as some asphalts are better suited to particular applications than others. Asphalt types. Type. Description.
Is asphalt a liquid?
Asphalt is a black, very sticky, and highly viscous liquid, or sometimes semi-solid, form of petroleum. It can be found in natural deposits, but is more often the result of refinement, and is classed as a pitch. Asphalt is highly recyclable, providing cost savings and environmental benefits.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
How thick should a surface be for asphalt?
The thickness should be about two inches as it is considered a standard for asphalt overlays and surface courses. Two-inch thickness has the potential to properly bonds the surface course to the binder course. If the thickness is less than two-inch it will cause raveling, cracking, and other asphalt issues.
What is hot mix asphalt?
Hot Mix Asphalt: It is also known as the “Dense-Graded Mix”. This type of asphalt is considered ideal for surfacing and repairing needs. During its production, the binder will be heated at a very high temperature to reduce viscosity. The high temperature will also remove all moisture prior to mixing.
Is asphalt a liquid or semisolid?
Asphalt is a semi-solid form of petroleum and appears in a sticky, black, highly viscous liquid form. It is classified as a pitch and can be found in natural deposits as well as a refined product. If it has a mixture of 95 stone, sand, or gravel that bounds together by asphalt cement, then it will be known as hot mix asphalt. ...
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to install asphalt curbs?
Asphalt curbing costs $3 to $6 per linear foot to install. Adding asphalt curbing to a 400-square-foot driveway costs $120 to $240. Repairing or replacing asphalt curbs costs $8 to $15 per linear foot on average. Total costs depend on curb thickness, styles, and labor.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.