What kind of fuel hose do I Need?
Fuel hoses are often specific for the pressure of fuel they will be transporting. If you are replacing a fuel hose for a higher pressure system, like a fuel injection hose, make sure you use a hose rated for fuel injection purposes.
What is the size of a fuel line vacuum hose?
Type: Fuel Line, PCV, EEC Hose Vacuum Rating (in/Hg): 10 Inch/Hg Length (m): 7.62m This product is universal and applies to all vehicles. Multi-purpose hose for use on return fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems.
What are fuel hoses and how do they work?
Fuel hoses transport fuel from your fuel tank to your engine and other parts of your vehicle. These hoses can crack or wear down over time. Replacing cracked or leaking hoses can increase fuel efficiency and keep you and your vehicle safe. Fuel hoses are often specific for the pressure of fuel they will be transporting.
What kind of fuel hose does Moeller use?
Moeller Marine 3/8" Low Perm Fuel Hose Moeller Marine fuel hoses are OEM compatible. This low perm fuel hose is designed for above deck applications. Fuel line hose for fuel system rigging...
Can heater hose be used for fuel vent hose?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
Can PVC air hose be used for fuel?
Although hoses for water spraying, air and chemicals are made out of many different materials, those for fuel gas and kerosene are almost all made out of rubber. Can PVC and other plastic hoses be used for fuels and gas? In short, the answer is no, they cannot.
What is the difference between A1 and A2 fuel hose?
Hose used for diesel supply and return applications must carry an A1 rating, while fill and vent installations call for hose designated as A2 (A1 is acceptable for fill and vent hose, however, A2 hose should not be used for anything other than fill or vent applications as it's not designed to be continuously filled ...
What diameter is fuel hose?
The sizes typically used in fuel systems are AN6 / Dash 6 / -6, which equates to a thread measuring 9/16” x 18 (threads per inch) with a hose bore around 3/8”, and AN8 / Dash 8 / -8 which has a thread measuring 3/4” x 16 (threads per inch) with a hose bore of around 1/2”.
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
Can I use air hose as fuel line?
That is why new fuel lines both in bulk and on newer engines costs so much. They have to be labeled on the hoses either A-1-15 or B-1-15 depending whether they are fire-resistant or not. do not use an air line for gasoline.
Which is bigger 5/16 fuel line or 3 8?
The 5/16″ fuel line is actually perfect for smaller outboards. Being a little smaller than the 3/8″ hose, it works great for little kicker motors, and sailboat outboard engines.
Is marine fuel line the same as automotive fuel line?
Marine-grade fuel hose is much heavier than the same inside-diameter hose as used in automotive applications. This is done as part of its fire or flame testing, a requirement under the regulations. All fuel hose used in engine room spaces on board gasoline-fueled boats must meet a 2.5-minute fire test rating.
What is marine grade fuel hose?
These are specifically designed and branded for use in supplying fuel to motors in boats or marine vessels. USCG Type A1 hoses are designed for fuel feed applications where the fuel is constantly in the hose, whereas Type A2 hoses are designed for fuel fill type hoses only.
How do I know what size fuel hose I need?
Fuel pumps are sized to feed your system with enough fuel to optimize engine performance....Recommended Size, Based on Horsepower.Recommended Fuel Line Size (from the tank to the pump)Engine OutputSize (inches)Size (AN)350 hp or less5/16 in.-5350-450 hp3/8 in.-6450-650 hp1/2 in.-81 more row•Sep 16, 2017
Is 3/8 fuel line big enough?
A 3/8”id fuel line can easily support 600 HP given sufficient “pump head”! Given a big enough pump a 3/8” steel line could support 1000 HP. The simple way to know is to install an electronic fuel pressure gauge. If the pressure falls as the engine RPM's go up you need more pump head.
Are bigger fuel lines better?
Fuel line diameter matters A LOT! A larger diameter is generally better, but the correct diameter is the best choice. If the diameter is too small: you won't be able to support your horsepower goal. If the diameter is too big: the lines will take longer to pressurize.
Product description
Excellent resistance to fire, heat, ozone, and permeation by alcohol blended gasoline and diesel fuels. Compounded to meet or exceed SAE-J1527 Type A, ISO/DIS 7840, and NMMA. Made in the USA. Product may be different than picture
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Detailed Description
Multi-purpose hose for use on return fuel lines, PCV and EEC systems, and for fuel return hose connections on diesel fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol and ethers (up to the legal limits allowed by the EPA).
Brand Information
For the past century Gates has been powering progress as one of the worlds leading parts manufacturers in the automotive industry, working with virtually every Original Equipment Manufacturer worldwide to design products for new vehicles as they are being developed.