How do you reset a Wordlock?
How do you reset Wordlock combination? Lock B – How to Reset Wordlock with Twist Mechanism With your Wordlock open, locate spin switch on the lock mechanism, this will normally have arrows and the word “set” on it. Rotate the spin switch into the “set” position, rotating it fully until it stops. ...
How to crack a Wordlock?
HOW TO CRACK ANY COMBINATION LOCK IN SECONDS
- EXPLAINING HOW IT ALL WORKS. A combination lock (using a bike lock as an example as shown in the pictures above) has three or more dials with a ...
- GATHER YOUR EQUIPMENT. To be able to crack your combination lock all you will need is a length of cord or rope around 30cm long and the combination ...
- FINDING THE RIGHT DIAL. ...
- CRACKING THE CODE. ...
How to unlock a four digit bike lock?
Unlock 4 Digit Cable Lock
- Understand What's Inside. When you scramble the lock, the plates slide to block the shackle from coming out.
- Tension the Lock. I wrapped the lock around a chair (pictured) sliding the cables apart increases tension in the system. ...
- Rotate the Tumblers. Start with the tumblers that are hardest to rotate first. ...
- Have Nerves of Steel. ...
How to set a Wordlock?
Set your passcode for a switch-style wordlock by following these instructions. The bottom of the lock has a little switch that connects the two ends. After flicking the switch up, turn the letters of the word you wish to use to the spot with the mark on the side to set the passcode.
How do you open a Wordlock bike lock without the combination?
2:393:31How to Unlock Wordlock Without the Password - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn.MoreIn.
How do you unlock a Wordlock if you forgot the combination?
Use Your Custom Set Combination However, in case you forgot how the lock operates, simply align the combination that you originally set with the small notches on the edge of the locking mechanism. Once you've input your combination the lock should open when you pull either side.
How do you break into a Wordlock lock?
2:404:42(1499) Wordlock Combination Padlock (JUNK!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind a binder now number two the second one is really binding and the first one is not so let's justMoreFind a binder now number two the second one is really binding and the first one is not so let's just put on him on any letter. And do the same kind of thing. All right again line to line.
How do you unlock a bike lock without a key?
Use a Locksmith. If you've lost the keys to your bike and have attempted these simple steps already, you might want to contact a local locksmith. ... Contact a Local Bike Shop. ... Use a Lock Pick. ... Use a Plastic Pen (BIC/Biro Style Pen) ... Use a Shim to open the lock without keys. ... Cut the Lock off Yourself.
How do I change the combination on my WordLock?
Turn the shackle 90 degrees counterclockwise so the notch on the shackle lines up with the groove in the body of the padlock. Push the shackle down. Turn the shackle another 90 degrees counterclockwise so the open end is over the viewing window. Spin the dials to your new word combination.
How do you reset a 4 digit combination bike lock?
0:001:25Reset Combo on a New Bike Lock Cable with LED Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the inside there should be a dial with the word set stamped on it to change the combination andMoreOn the inside there should be a dial with the word set stamped on it to change the combination and rotate the dial about a quarter turn and into the set mode.
How do you open a letter lock?
How to Open the 1590D Precision Dial Combination LockTurn the dial right 3 times. Stop at the 1st number/letter.Turn left 1 full turn, pass the 1st number/letter & stop at the 2nd number/letter.Turn right & stop at the 3rd number/letter. Pull up on shackle.
How do you change the combination on a Wordlock bike lock?
Choose a new word before resetting dials and write it down. Align dials to S-H-E-D between notches. Rotate inner ribbed silver dial clockwise until it stops. The word “set” on silver dial should now be on top, aligned with S-H-E-D. Rotate outer black dials so new word is aligned with notches. Check your new word.
How do you unlock a Wordlock lock?
Push the lever/switch so that it faces downwards (or in the opposite direction that it was originally facing). The locking mechanism is now in the setting position. Once your new code has been entered, move the lever/switch back into its original position. The code to your Wordlock has now been reset!.
How do I reset my Wordlock code?
Turn the shackle another 90 degrees counterclockwise so the open end is over the viewing window. Spin the dials to your new word combination. Turn the shackle back clockwise 180 degrees and close it as normal. Scramble the dials and your new code works immediately.
How do you break a bike lock with a hammer?
Hammer until the U-lock breaks. Keep hammering against the keyhole area of the U-lock. You may have to hammer for 30 seconds or so until a piece breaks off of the bar, after which breaking it will become much easier. Focus your hammering against the broken area of the lock.
What is a letter lock?
a lock that can not be opened when fastened, unless certain movable lettered rings or disks forming a part of it are in such a position (indicated by a particular combination of the letters) as to permit the bolt to be withdrawn.
How do I turn the letter lock off my keyboard?
To toggle these functions on (lock) and off (unlock), push the respective key (Scroll Lock key, Num Lock key, or the Caps Lock key) once on your keyboard. Pressing the key toggles that keyboard function. For example, if Num Lock is turned on and you push the Num Lock key, Num Lock is turned off, and vice versa.
How do you reset a bike lock?
Push the reset lever up. According to Masterlock.com, the lever should be facing down after you unlock the lock and pull out the cable. Flipping it up allows you to change the combination. Turn the bike lock dials to the new combination that you would like.
Step 1: Set Starting Point
Get all of the same digits to line up at the starting position. You can start with any digits, but it just makes sense to start at 1. The method here is to tug at each end until you see a gap form. For example, when the first number has the correct digit, you'll notice a small gap between the first and second slots.
Step 2: Continue to Tug & Change Digits Until You See a Gap
As you can see below, once the first number reaches 3, you can notice a small gap when tugging at each end. This means we have our first combination digit.
Step 3: Use Tug Method to Find Rest of the Combination
Go down the line until you each the final number. Here, when you get the correct digit and pull on each end, your lock will open up. Pretty simple, right?
Check Out the Video
For more information, check out the full video guide below from YouTube user diilonp23. While this is not guaranteed to work on all combination cable locks for bicycles, since designs are all slightly different from manufacturer to manufacturer. But who knows, you might get lucky and save your lock from bolt cutters.
Where is the shackle on a dial lock?
In the last video we showed you, the shackle went through the centre of the dials so when the dials were in the correct position the shackle slid up. In this lock you can see the shackle is actually to the side of the dials and the core is the bit that holds the shackle in place.
How to get the right letter on a lock?
Pulling down lightly on the lock, turn the dial. You will know when you find the right letter cause it will stick and you won’t be able to move it again. The insides actually move a bit when you get the right letter. The gear under the dial falls into the groove and the inner core can slide slightly which then causes the next dial to bind.
What is inside a lock?
Inside the lock you have the usual parts like the shackle. You also have the dials which turn gears underneath that you cant see in this picture. And finally, you have the core which runs through the centre. The core is the bit that moves to unlock the shackle which means you cant shim the shackle.
How to tell which lock is the last dial?
On this lock, you find that the last dial is the one that binds when you apply tension. Other locks could be the opposite or you might find you can’t tell the order until you start testing it, again like picking a pin tumbler.
Can you pull a lock with your hands?
You can pull up with your hands on the shackle but this gets ti ring quickly so its way easier to attach it to something and just pull down. What we do is put another lock in our vice and hook the shackle through that lock. It’s like it’s locked onto something, like a gate or locker, and its easy to pull down and use a constant tension. Please excuse the starting combination on this lock. I swear it came like this from the shop