Answer: You can use it with anything that accepts TrimmerPlus attachments. I use it with my Ryobi 825R. I'm also using a TroyBilt attachment on my Ryobi, so they might be interchangeable.
Full Answer
What brands are compatible with Ryobi attachments?
what brand names work with Ryobi attachments? Other brand names that utilize this system consist of: John Deere, Cub Cadet, Troy-Bilt, Poulan, Poulan Pro, Weed Eater, Homelite, Artisan, McCulloch, MTD Pro, YardMachine, and also Backyard Guy. The Toro systems that we provide at The House Depot work with the Ryobi Expand-It devices.
How to install a trimmer line on a Ryobi?
How to Install a Trimmer Line on a Ryobi
- Remove the spark plug wire from the spark plug to avoid accidental starts. ...
- Measure a 9-foot length of trimmer line and cut it from the spool. Repeat the process to create a second 9-foot length for installation in the string trimmer.
- Locate the hole in the top part of the spool and insert one length of trimmer line into it. ...
How to tune up a Ryobi Trimmer?
How to Adjust a Ryobi Trimmer Carburetor
- Locate the idle-adjustment screw on the Ryobi trimmer. On the four-cycle Ryobi, the idle adjustment screw is directly below the primer bulb.
- Start the Ryobi engine, and hold the trigger to allow the engine to stay at a high throttle speed for one minute.
- Release the trigger, and allow the engine to idle. ...
- Start the engine again, and test the idle. ...
How to fix the starter on a Ryobi Trimmer?
To solve the problem, this is how to start a Ryobi 2 cycle trimmer correctly:
- Add correctly mixed gas and oil as not doing so can cause the trimmer to stop working. ...
- Press the “PRIME BULB” about seven to ten times to prime the engine
- Set the choke to full position
- Squeeze the throttle then pull the starter rope until the engine starts
- Slide the choke to half position and allow the engine to warm for about 30 seconds
Do TrimmerPlus attachments work with Ryobi?
Yes. I just used the Trimmer plus with my Ryobi Expand-It 40V that came with the string trimmer attachment. Works great.
What brands are compatible with TrimmerPlus attachments?
Trimmer plus attachments are compatible with most square drive shaft connection. Other brands that use this system include: John Deere, Cub Cadet, Troy-Bilt, Poulan, Poulan Pro, Weed Eater, Homelite, Craftsman, McCulloch, MTD Pro, YardMachine, and Yard Man.
Will other attachments fit Ryobi?
Save money and space by simply swapping out the attachments as needed and have confidence knowing these attachments can be used with any RYOBI powerhead and other universal attachment capable string trimmer brands. These attachments do not require tools or adapters for a hassle-free transition from tool to tool.
What attachments are compatible with Ryobi expand-it?
The RYOBI Expand-It™ Straight Shaft String Trimmer Attachment works with any of the RYOBI power heads. Whether you prefer 2 Cycle or 4 Cycle gas, cordless or electric power, quickly attach the straight shaft trimmer to the bottom of your power head.
Are all Trimmer attachments universal?
Some models are designed for specific string trimmer brands; however, there are universal attachments that will fit various makes and models of attachment-capable string trimmers.
What is TrimmerPlus?
TrimmerPlus Features Convert your trimmer into an variety of outdoor power equipment.
Will Ryobi attachments fit Black Max?
This edger attachment can be used with Black Max, RYOBI, Toro, Weed Eater, Troy Bilt, Murray, Poulan Pro Trimmers and other universal brand fit power heads and trimmers.
Does Kobalt attachments fit Ryobi?
Answer: I got a Ryobi Expand-It edger attachment that mates perfectly. The Expand-It attachments all have a universal connection that works with many brands including Kobalt.
Does Ryobi expand-it fit GreenWorks?
You can email us at [email protected] for a list of attachments. The shaft is 1" in diameter and the internal bit connector is 11/32". GreenWorks currently does not manufacture any attachments as this unit was designed to universally fit gas attachments such as the Ryobi expand-it.
How do you hang Ryobi with expanded attachments?
0:000:47Easiest Way To Store Ryobi Expand-It Attachments - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd basically all these are little plastic caps with rings on them so that when you snap them on theMoreAnd basically all these are little plastic caps with rings on them so that when you snap them on the end of an attachment. You can easily hang it on a pegboard.
What is the Ryobi expand-it?
The RYOBI 40V-X Expand-it String Trimmer is the first cordless system that is also attachment capable. Add the Expand-it cultivator, blower or even edger to the bottom shaft of the RYOBI 40V-X String Trimmer power head to quickly transform your lawn from overgrown to manicured.
How do you change a Ryobi trimmer head?
0:060:59Ryobi String Trimmer Head Replacement 311759014 - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can now rotate the old trimmer head clockwise to detach install the new trimmer head by firstMoreYou can now rotate the old trimmer head clockwise to detach install the new trimmer head by first aligning the flanged washer then thread the head on counter. Clockwise. Align the slots insert.
Does Troy Bilt Trimmer Plus work with Troy Bilt Trimmer Plus?
Yes, all Tri mmerPlus attachments are compatible with attachment-capable Troy-Bilt units - including the TB675EC.
Does a Troybilt hedge trimmer work with a Craftsman trimmer?
The hedge trimmer attachment will certainly work with your attachment capable Troybilt unit. Both the Troybilt and Craftsman trimmers are in fact made by the same manufacturer (MTD Products), and attachments and the units themselves are both comparable and compatible. Posted by Christopher M. Click to see full answer.
What is trimmer plus?
TrimmerPlus is a line of attachments produced by Troy-Bilt. Troy-Bilt is an experienced and well-trusted organization that makes premium machines and replacement parts. If your trimmer’s documentation mentions that TrimmerPlus parts are accepted, you should not opt for a similar, cheaper brand.
What attachments do hedge trimmers use?
Most capable trimmers will attach to hedge trimmers, pole saws, leaf blowers, edgers, cultivators, and pruners. Rather than spending several hundred dollars on multiple machines, you can buy a model that accepts attachments that usually cost under ninety dollars.
How much does a Makita trimmer cost?
Premium brands like Makita sell some of their attachments for $300, but most TrimmerPlus add-ons sell for around $100. You can purchase a cultivator for under $100 or an edger for under $70. Examine your machine’s manual or website to see if your model accepts TrimmerPlus attachments.
How does Makita power head work?
Makita’s couple shaft power heads use a lever system to attach to the base. After you slide the attachment in the coupler, you fasten a small lever to secure the add- on. Although Makita offers more attachments than other brands, the price of their add-ons is much higher than the competition on average.
What is locking system on a trimmer?
The locking system secures the attachment to the shaft. If you have a square-shaped attachment slot and the add-on is cylindrical, the pieces are not compatible. Some incompatible attachments will seem to fit the trimmer, but on closer inspection, you can see the pole has a smaller diameter and does not fit tightly.
What is the bottom of a Milwaukee shaft?
The bottom of the shaft (where the add-ons attach) has a small notch that lines up with the metal screw on the bottom of the attachment. The star-shaped interior of the attachment is a unique feature of Milwaukee parts and is a sign that dissimilar add-ons are not compatible with Milwaukee.
Can you switch out a string trimmer?
You can save money when you purchase a string trimmer with multi-function features. Without using extra tools, you can switch out your trimmer for an edger or blower in a few seconds. There are several attachments available, but ensure that your add-on fits securely before you operate the machine.
