The Husqvarna guide bars can fit on both models of STIHL 661. If you have a smaller model of the Stihl, you can use the 36in a bar form that you saw on your 3120 Husqvarna. However, if you’re using a bigger one, you can use a larger one from a STIHL. The larger Stihl bar will fit, and the smaller one won’t. Adapt the guide bar for your Husqvarna
Will Husqvarna bars fit Stihl studs?
They can also be made to fit together, although this involves widening the mounting slot and takes some work. Mounting slot: The Husqvarna Large bar mounting slot is too narrow for the Stihl 3003 bar studs (9 mm vs. 12.1 mm). As with Husky Small bars, you will have to mill or grind the slot wider.
Do Husqvarna and Stihl fit together?
They can also be made to fit together, although this involves widening the mounting slot and takes some work. Mounting slot: The Husqvarna Large bar mounting slot is too narrow for the Stihl 3003 bar studs (9 mm vs. 12.1 mm).
Will Husqvarna bars fit on Stihl 3003?
Mounting slot: The Husqvarna Large bar mounting slot is too narrow for the Stihl 3003 bar studs (9 mm vs. 12.1 mm). As with Husky Small bars, you will have to mill or grind the slot wider.
What do the Stihl and Husqvarna bar markings mean?
Stihl (top) and Husqvarna (bottom) bar markings tell you the chain pitch and, in case of Stihl, the bar mount (first 4 digits in the bar number).
Are Husqvarna and Stihl chains interchangeable?
But if the pitch, gauge, and drive link count are the same, you can run any brand of chain, just like you can mount any brand of tire on your car if the numbers on the sidewalls are the same.
Can you use any bar on a Stihl chainsaw?
Stihl's electric saws come in three different sizes: the MSE 140 can handle a bar between 12 and 16 inches, the MSE 180 can take a bigger 18-inch bar, and the MSE 220 takes a bar between 16 and 20 inches.
Are all chainsaw bars universal?
No, chainsaw bars are not universal. There is no one-size-fits-all chainsaw bar. When you have to replace your old or broken chainsaw bar with a new one, brand and model always play a role. In most cases, it is possible to use a bar from a Husqvarna as a replacement for the one you have on your STIHL chainsaw.
Will a Oregon bar fit a Stihl?
Chainsaw Bar & S55 Chain, Fits Various Stihl Models (105668) This product is only available through retailers or servicing dealers.
Will a Poulan bar fit a Stihl?
Product Description. STIHL 63 PM3-56 chainsaw chain made in Switzerland with high quality steel. This chain fits Homelite, Poulan, Echo, Craftsman, Remington and others with the same specs.
Are all 18 inch chainsaw bars the same?
You can't just walk into a store and pick up a chain that matches the effective cutting length of of the blade. General chain lengths, like 18 inches, are not interchangeable. That's because chainsaw chains actually have three measurements: number of drive links, pitch, and gauge.
Can you swap chainsaw bars?
Replacing your chainsaw bar will require a few measurements. Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches.
Can I put any bar on my chainsaw?
Not every bar or chain is right for every saw. For example, larger chainsaw bars work best with more powerful saws because it takes more energy to drive a chain around a long bar. That's why electric saws use bars 18" and shorter. Similarly, chainsaw chains are measured to fit certain bars.
What size bars does Stihl make?
STIHL guide bars range from 10" (found on our tree-trimming pole pruners) to an incredible 59" (used in extreme felling operations). STIHL manufactures over eighty bar configurations to match the unique cutting requirements of our hardworking chainsaws.
Will Oregon Bar fit Husqvarna?
Chainsaw Bar & H78 Chain, Fits Husqvarna, Poulan, Makita, Craftsman, Jonsered, McCulloch and more (577330) This product is only available through retailers or servicing dealers.
When should you throw away a chainsaw chain?
The chainsaw pulls in one direction, which results in a crooked finish. Blunt cutting teeth on one side or uneven teeth lengths usually cause this. The teeth has hit rocks or dirt and broken. If you notice the tops of the teeth are missing you will need to replace the chain.
Do you have to use Stihl chains on Stihl chainsaws?
Stihl manufacturers replacement parts, including chains, as well as chain saws. Stihl recommends using its own chains as replacements, but after-market manufacturers produce similar chains that may be used on a Stihl chain saw.
Step 1: Obtain an Adapter
An adapter is needed to prevent the Stihl bar from flopping around on the smaller Husqvarna mount bolts. Measurements in the pic notes...
Step 2: Layout and Mod Prep
After obtaining an adapter, take the Stihl bar and place it on a flat surface such as a workbench. Lay the Husqvarna bar directly on top of the Stihl bar. Make sure the the chain adjuster holes from both bars are aligned (see 3rd pic above), then using a marker or pencil, mark the part of the Stihl bar that will be removed later.
Step 3: Grinding, Drilling or Both
In this step, you'll be removing the material marked out during the previous step. I used a die grinder. You can use a drill, drill press, end mill or any combination of these to open the bar slot enough to accommodate the adapter.
Step 4: The Tensioner Holes
The adjuster holes for the Husqvarna are larger than the Stihl bar. This is because the adjuster pin on the Husqvarna saw is larger. You'll need to open these holes to around 6.5mm to accommodate the Husqvarna chain tensioner pin. A Dremel with a diamond bit can also be used.
Step 5: Install and Test Fit
Install the adapter, the bar and the chain. Mount the clutch cover and tension your chain as normal. Make sure the chain is properly tensioned and the brake released. Rotate the chain using a screwdriver or gloved hand. Check to make sure the chain rotates freely without binding or resistance.
