4 Reasons Why Maytag Washer Not Filling With Water
- Caution! Before performing any repairs on your Maytag washer, be sure to disconnect it from its power supply.
- Household Water Supply. ...
- Hot and Cold Water Faucets. ...
- Water Inlet Hose. ...
- Water Inlet Valve. ...
- Drain Pipe (or Standpipe) The drain hose is connected to the washer on one end, while the other attaches to the drainpipe (or standpipe).
Full Answer
How to troubleshoot a Maytag dishwasher not filling with water?
We pulled Home Depot’s top deals from their MLK Day appliances sale
- Reasons to replace appliances. Buying new major appliances is a big investment. ...
- Selecting new appliances. When you are ready to shop for a new refrigerator, range, or other appliance, the numerous available options can be overwhelming.
- Product list. ...
How to fix a Maytag dishwasher?
Maytag Dishwasher Not Draining
- Check the filter at the bottom of the dishwasher and clean it to remove any particles blocking filter inlet.
- Check if the sink drains out water. ...
- Remove the clog in the plumbing with a plunger to make the dishwasher drain properly.
- Turn ON Garbage disposal as a clogged garbage disposal can prevent the dishwasher from properly draining.
How to reset Maytag dishwasher easily [in 1 minute]?
How to reset the Maytag dishwasher control panel?
- The first step in resetting the Maytag dishwasher control panel is to unplug it.
- The power should be cut only for 1 minute.
- In the case of hard-wiring, the breaker needs to be turned off at the home electrical panel that powers the dishwasher for about a minute. ...
Why is my Maytag dishwasher overflowing?
Troubleshooting and Diagnosis
- Using the Wrong Detergent. ...
- Maytag Dishwasher is Overloaded. ...
- Dishwasher is Unlevel. ...
- Faulty Water Inlet Valve. ...
- Loose Pump Seal. ...
- Damaged Latch or Gasket. ...
- Faulty Float Switch. ...
- Stuck or Clogged Spray Arm. ...
- Check Dishwasher Pump and Hose. ...
Why is there no water coming into my dishwasher?
0:101:52Dishwasher Won't Fill With Water — Dishwasher TroubleshootingYouTubeStart of suggested clipEnd of suggested clipIf your home's water pressure is too low the dishwasher may not fill. You should inspect the waterMoreIf your home's water pressure is too low the dishwasher may not fill. You should inspect the water supply line for any damage or obstructions.
Why does my Maytag dishwasher not fill with water?
Some Maytag dishwashers will not fill with water if any of the elements that need to freely move inside the dishwasher cannot move. Inspect the door to see if it engages and latches. If the door does not fully engage or shut, the open door latch sends a signal to prevent the dishwasher from filling with water.
Where is the inlet valve on a Maytag dishwasher?
0:065:20Maytag Dishwasher Repair – How to replace the Water Inlet ValveYouTubeStart of suggested clipEnd of suggested clipAnd then the fill valve is located directly in on the left side here and it's mounted to a mountingMoreAnd then the fill valve is located directly in on the left side here and it's mounted to a mounting bracket a game with two quarter inch hex head screws.
How do I reset Maytag dishwasher?
To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in.
How do you test a dishwasher water inlet valve?
7:3010:09How To Test A Dishwasher Water Inlet Valve (The Right Way) - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow turn on your power supply or plug in your test. Cord. If the water valve is good the waterMoreNow turn on your power supply or plug in your test. Cord. If the water valve is good the water should flow out of the valves at a steady. Rate. If no water comes out of the valve.
How do you test a water inlet valve?
1:422:50Washer Not Filling? Water Inlet Valve Testing, Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo help determine this shut off the water supply. Disconnect the hot and cold water supply linesMoreTo help determine this shut off the water supply. Disconnect the hot and cold water supply lines from the inlet valve and hold them over a bucket or a washtub.
How do I troubleshoot my Maytag dishwasher?
0:201:56Maytag Dishwasher Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure that the door is completely closed and latched a lower dish rack that is installedMoreMake sure that the door is completely closed and latched a lower dish rack that is installed backward can also cause the door to not latch properly is the water supply turned on to the dishwasher.
Where is the water inlet valve on a Maytag?
2:096:12How To: Whirlpool/KitchenAid/Maytag Water Inlet Valve WP8540751YouTubeStart of suggested clipEnd of suggested clipIt's right here on the back of the valve.MoreIt's right here on the back of the valve.
How do you clean the water inlet valve on a dishwasher?
Plumber Pro TipsLocate the solenoid valve, remove the inlet hose, and then unscrew the brass angle fitting.Loosen the inlet hose, and pull the hose away from the valve.Pop the screen out with a pick or small screwdriver, and clean or replace it.Reassemble the parts in the reverse order.
Does a Maytag dishwasher have a reset button?
To reset Maytag 300 dishwasher (the door must once more be open – and not latched), press: “Heated Dry” “Normal” “Heated Dry” –again.
Do dishwashers have a reset button?
Can you reset your dishwasher? Yes, you can reset your dishwasher by pressing the Start/Reset button on the appliance and waiting a few minutes. If your dishwasher still doesn't start, you may need to reboot the entire system by turning off power to the appliance at the house circuit breaker or fuse box.
How do I reset my dishwasher control panel?
How Do I Reset My Dishwasher Control Panel? Simply unplug your dishwasher. Wait for one minute, then plug it back in again, to reset the dishwasher control panel.
IS YOUR DISHWASHER LEAKING?
A leaky dishwasher is the last thing anyone wants to deal with, but the solution may be simple like switching detergent, loading differently or rep...
IS YOUR DISHWASHER HAVING DRAINAGE PROBLEMS?
If your dishwasher has a filter, it’s quite normal to see about an inch of standing water when removing the dishwasher’s filter. However, If you se...
IS YOUR DISHWASHER NOT CLEANING YOUR DISHES PROPERLY?
When dishes come out less than clean, the most basic dishwasher troubleshooting moves are often the most helpful: make sure you’re not using too mu...
DOES YOUR DISHWASHER HAVE UNPLEASANT ODORS?
The most likely culprit of odors coming from your dishwasher is food particles that have gotten stuck over time. An easy fix to this problem is to...
IS YOUR DISHWASHER NOT STARTING?
While this issue might not be a common one, an unresponsive dishwasher is a problem you may encounter at some point. Fortunately, this doesn’t mean...
Why won't my dishwasher fill with water?
A door switch is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. If the door switch is malfunctioning , the dishwasher will not fill with water.
Why is my dishwasher not getting hot water?
Most often, the water inlet valve is the main reason why a dishwasher is not getting water. The water inlet valve is used to fill the dishwasher with the proper amount of hot water and is controlled by a timer or electronic control. If the water inlet valve fails to open , this prevents water from entering the dishwasher.
What happens if a dishwasher drain solenoid is broken?
A broken drain solenoid affects drain valve functioning. A dishwasher drain valve is controlled by a drain solenoid. If this solenoid is faulty, it will not allow the drain valve to function, and it may be the issue with the dishwasher not getting water.
What is a malfunctioning float switch?
A malfunctioning float switch may be interrupting power. When water fills up a dishwasher during a wash cycle, a small plastic piece will float upward. Under the float, in the bottom of the dishwasher tub, is the float switch that signals the water inlet.
How to check if dishwasher door switch is working?
If you want to check the door switch, you’ll need a multimeter to test the probes of the component. First, unplug the dishwasher. Open the door and unscrew the inner door panel. When you remove that panel, you’ll see the latch assembly at the top of the door.
What happens if the water inlet valve fails?
If the water inlet valve fails to open, this prevents water from entering the dishwasher. This valve, usually found in the front part of the dishwasher behind the bottom access panel, has a hose that’s connected to the water line as well as a hose coming out of it to the tub of the dishwasher.
What is a Maytag dishwasher?
Select Maytag ® dishwasher models feature Dual Power Filtration, an industry-first combination of 100% microfiltration and a 4-blade stainless steel chopper. It filters out, chops up, then drains food from the dishwasher, helping prevent clogs and there's no need for routine maintenance.
How to reset a dishwasher without a plug?
To reset your dishwasher, simply disconnect from the power source for a full minute before plugging back in. For dishwashers without a plug, you’ll need to turn off the breaker.
How to get rid of dirty dishes?
Start with one tablespoon of detergent or one detergent tablet or pack. If your dishes still come out dirty, try increasing the amount of detergent ( if using liquid or powder) or switch up the brand. Maytag recommends using Rinse Aid in addition to your detergent.
Why are my dishes streaky?
This may not be your dishwasher at all. The problem could be the hardness of your water. Over time, minerals can accumulate on your glassware, causing streaks. Switching to a detergent that combats water hardness is recommended, and use Rinse Aid to help your dishes dry faster and clearer.
How to remove filter from dishwasher?
Many dishwashers allow you to remove the filter by hand while others may require a screwdriver. You'll usually need to give the filter a quarter turn counterclockwise and a quick pull to remove it. Refer to your dishwasher’s use and care guide for model specific instructions.
How much water does a dishwasher filter have?
If your dishwasher has a filter, it’s quite normal to see about an inch of standing water when removing the dishwasher’s filter. However, If you see more than an inch of water accumulation in your dishwasher, chances are that you may have a clog. This is a simple fix.
Can you put aluminum utensils in the dishwasher?
Take notice of how you place items into the dishwasher. Avoid placing aluminum utensils next to glassware and dishes, since they can rub against each other and cause markings and scratches.
Why is my Maytag dishwasher not working?
There are several reasons why your Maytag dishwasher not starting or not operating: control lock is on. dishwasher is in sleep mode. delayed wash option is selected. door is not completely closed and latched. water supply is not turned on. the power needs to be cycled to reset the dishwasher.
Why won't my Maytag dishwasher start?
There are several reasons why your Maytag dishwasher not starting or not operating: 1 control lock is on 2 dishwasher is in sleep mode 3 delayed wash option is selected 4 door is not completely closed and latched 5 water supply is not turned on 6 the power needs to be cycled to reset the dishwasher
How to reset a dishwasher?
To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug ...
What is delay wash?
A delay wash option runs the dishwasher at a later time or during off-peak electrical hours. If the delay wash has been selected, the dishwasher will not run until the delay time is reached.
How many times does the dishwasher light flash?
If any buttons are pressed while the dishwasher control is locked, the light will flash three times. The door can still be opened/closed while the controls are locked.
Is the control lock on or is the dishwasher in sleep mode?
Is the control lock "on" or is the dishwasher in sleep mode? The control lock is used to avoid unintended use of the dishwasher as well as to avoid unintended cycle or option changes during a cycle, some model have a sleep mode function.
Why is my Maytag dishwasher not draining?
In some rare cases, a mechanical failure or electrical problem can cause your Maytag dishwasher not to drain. Fortunately, homeowners can resolve the most common clogs that cause a Maytag washer to fail to drain.
What does it mean when a Maytag dishwasher doesn't work?
A properly working dishwasher is a huge labor-saving device. It eliminates much of the drudgery of kitchen chores at mealtime. When your Maytag dishwasher doesn’t work properly, things can become frustrating. We hope that the information in this article helps you keep your Maytag dishwasher running in top form.
How to clean Maytag dishwasher filters?
Step 1 – Be Safe. Before you start to work inside the washtub of your Maytag dishwasher, you should have kitchen gloves that will protect your hands and wrists.
What to do if no water drains back into Maytag dishwasher?
If no water drains back into the Maytag dishwasher, the check valve is operating properly. Replace the drain line to the air gap or the garbage disposal. A Maytag service technician can run a full-service diagnostic on the Maytag dishwasher to determine the error code’s cause.
How to tell if Maytag dishwasher is bad?
Like many other smart appliances, if your Maytag dishwasher senses a problem, an error code will flash on the control panel. On most Maytag dishwashers, the code indicates by flashing the Clean button in a unique pattern. If the clean light is flashing, there is an error code with your dishwasher.
What is the error code 2-1 on a Maytag dishwasher?
An error code 2-1 indicated a problem with the user interface controls. In most instances, this is a stuck button on the interface control panel. This error code will prevent the Maytag dishwasher from starting or continuing to operate. Follow the steps below to diagnose a stuck button problem.
Why is my dishwasher displaying error code 4-3?
A loss of communication between the control board and the circulation pump causes an error code 4-3. This situation also shuts down the dishwasher until you resolve the error code. Checking this problem requires opening the dishwasher to access the recirculation pump and wiring harness.
Is the overfill protection float restricted?
Remove obstructions from the float area. Move the float up and down to see if it moves freely. The overfill protection float (in the front right corner of the dishwasher tub) keeps the dishwasher from overfilling. It must be in place for the dishwasher to operate.
Still need help? Contact us or schedule service
Please contact us or click below to make an appointment from our preferred list of service providers for service on your appliances.
Interested in purchasing an Extended Service Plan?
Please click below to learn more on how you can save up to 25% on New Appliance Extended Service Plans within 30 days of your appliance purchase.
Check Drain Hose
The Maytag dishwasher not draining could be caused by the drain hose being kinked or crushed. If this is the issue, then manually unkinking it will solve most issues. However, there are also times when a Maytag dishwasher may have been installed incorrectly and needs to be moved away from any obstacles so that it can function properly.
Clogged Drain Filter
One Maytag dishwasher problem that can cause Maytag dishwasher not to drain is a clogged drain filter. If this becomes blocked and water cannot flow through it, the Maytag will be unable to rinse cleanly.
Clogged Garbage Disposal
In most instances, the dishwasher drain hose connects to garbage disposal. When there is food built up inside the disposal or if it is clogged, there will be less room for water to flow in and out of the dishwasher.
Check Drain Pump
The drain pump uses an impeller to force water through the hose. If the motor is not working, your dishwasher won’t be able to get rid of any dirty dishes! To find out if it’s just a problem with this specific part or something else entirely, check for continuity in the type and power supply before you decide what needs replacing.
Clean the Air Gap
Air gaps act as a safety device to block water from draining back into the dishwasher. Maytag dishwashers are equipped with air gaps that should be cleaned regularly and inspected for clogs, corrosion, or debris build-up. If your Maytag is not fully draining after running it through its cycle, this could be the problem!
Timer
The Maytag dishwasher’s timer can be set to delay the drain pump from turning off. This setting is not applicable for all Maytag models, so check your manual before applying this fix. If you have a Maytag dishwasher acting up and draining slowly, try switching the time delay on or off.
Using the Wrong Type of Detergent
Maytag dishwashers will not drain if the wrong type of detergent is used. Maytag recommends using powder fillers and tablets for use in their machine. If you are thinking about switching from liquid to powder or vice versa, be sure that all the other settings remain unchanged.
Why is my dishwasher not getting water?
The causes of a dishwasher not getting enough water could be connected to the door indicator acting up. If the appliance doesn’t sense the door is closed, there will be no stream of water. This is done to protect the device from damage and to prevent leaking. There are two ways to fix a dishwasher door malfunction.
Why isn't water coming out of my dishwasher?
The reason for water not going into your dishwasher could be that a float is stuck in the shut-off position, preventing water delivery. If that’s the case, homeowners should call technicians to assess float assembly and replace the component if needed. Reason #2. Dirt on valve screens.
What is a dishwasher solenoid?
Drain solenoid malfunctions. The drain solenoid is a dishwasher component responsible for draining excess water from the appliance. If it activates too quickly or is malfunctioning, the float switch activation can be triggered, resulting in a dishwasher not filling with enough water.
Why does my dishwasher float?
Let’s examine the most common reasons for this type of dishwasher malfunction. Reason #1. Rising float. The rising of the float is normal — it happens anytime the dishwasher is full. When the float reaches its peak height, sensors will shut off the water supply as a preventative measure against leaks.
How do I fix a dishwasher door?
One is to ensure the door system itself is intact and that it can close and latch tightly. The second is to assess the condition of the door indicator — check the door switch lever or catch and clean it thoroughly of dirt and debris.
How to tell if dishwasher door is open when closed?
Here’s how you can manually assess the state of the dishwa sher door switch: Unplug the dishwasher. Look at the top of the appliance’s door and find the latch on the door panel.
How does water get into a dishwasher?
To get into the dishwasher, water passes through inlet valves. If the stream of water is weak, unevenly distributed, or absent altogether, it’s likely that dirt and debris have clogged the filler valve screen filters.
Caution!
Before performing any repairs on your Maytag washer, be sure to disconnect it from its power supply. Doing this will eliminate the risk of electrocution and reduce your overall injury risk.
Household Water Supply
The most crucial supply needed by your Maytag washer is that of clean water. While some models might only need a cold water supply, others may require a stable supply of both hot and cold water from your household’s indoor water supply.
Hot and Cold Water Faucets
Like any water outlet located throughout your household’s plumbing, there will be a faucet controlling the flow of water to your washing machine. Of course, if your Maytag washer has both a hot and cold water inlet, then there will be two corresponding water faucets instead of one.
Water Inlet Hose
Between the water faucets on your household plumbing and the Maytag washer’s water inlet valve, there will be one or two water inlet hoses bridging the gap. Each hose is typically made of rubber, and they screw tightly to the tap and the connection ports on the water inlet valve at the back of the washer.
Water Inlet Valve
The water inlet valve is the component on your Maytag washer that regulates the flow of water into the appliance. You’ll find it on the rear of your washer, with ports that connect to the water inlet hose described earlier.
Drain Pipe (or Standpipe)
The drain hose is connected to the washer on one end, while the other attaches to the drainpipe (or standpipe). Its purpose is to allow used water from your Maytag washer to flow out quickly into the household’s plumbing system at the end of the washing cycle.
