What does the DL code on a washing machine mean?
So the DL code stands for improper lid closing, and it can be explained by such factors as issues with the door itself (there might be foresight objects or a part of your laundry stuck in it) or malfunction if the lock.
Why does my Kenmore Elite washer keep saying FDL?
If you see "Fdl" or "Fdu" error codes, these are usually indications of a failed door latch assembly and will require replacement. You can also try to reset the CCU by unplugging the washer for AT LEAST 30 minutes. Hope that helps.
Why is my Kenmore washer not producing Error codes?
If there are no error codes being generated, this could have just been a momentary glitch. If you see "Fdl" or "Fdu" error codes, these are usually indications of a failed door latch assembly and will require replacement. You can also try to reset the CCU by unplugging the washer for AT LEAST 30 minutes. Hope that helps.
How do I gain access to my washer if the door is locked?
Here is a way to gain access to your washer if the door is locked shut. 1. Remove the lower panel under the door by loosening the three screws under the bottom edge on the front of the washer. HINT: If you prop up the front feet of the washer with some small blocks of wood, this will make access to the screws much easier.
How do I fix the E DL on my washing machine?
Check the door. It may have a door lock issue even if it's closed. Typically the E DL error refers to a door lock problem. Open and close the door again.
What does DL mean on my washer?
The F/dL code indicates a door lock error on the machine. When the door fails to lock to allow the cycle to begin, it attempts to lock itself at least six times before the error appears on the digital display screen.
What does it mean when a LG washer says DL?
The DL error code is found only on top-loading models of washing machines. The reason for this code is problems with closing the lid. The lid of the washing machine does not lock, so the system does not start the selected program.
Why does my Samsung washer say DL?
Samsung F/dL - Door Lock Error A Door Lock Error occurs if the door cannot be unlocked. It will try to lock it 6 times before displaying the error.
How do I fix the DL error on my LG refrigerator?
A dL error code displays when the door motor does not move to maximum position or home position within 5 seconds. Unfortunately, there are no troubleshooting steps for this error code. The unit will require a repair service, please visit our Request a Repair page.
How dO I fix the DL on my LG washer?
According to this link, error code dl is a lid lock switch error. Here is a link which shows how to repair a lid switch assembly. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.
Why is my LG washer door not locking?
Common solutions for: LG Washer door or lid won't lock If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.
How dO I fix the lid lock on my LG washer?
1:524:30LG Top-Load Washer Lid Lock Replacement #EBF60665201YouTubeStart of suggested clipEnd of suggested clipDetach the lock and release the wire sleeve from the dispenser housing and hose. Prepare the new lidMoreDetach the lock and release the wire sleeve from the dispenser housing and hose. Prepare the new lid lock for installation by transferring the wire sleeve retainer from the old part to the new. One.
How do I fix error code AC6?
AC6 error is an error when the exchange of data between the control module and the information display board has an issue. Recommended Troubleshooting Tip: Switch off the washing machine and unplug the power cable from the power source and power it on again and start another washing cycle.
How do I resolve de error on my Samsung top load washer?
Samsung Washing machine DE error, door detected as being openCheck door is closed correctly and latched.Check door handle for damage or wear.Check child safety if this feature is on the machine.Check door lock if inoperative replace door lock.Check door lock wiring for burnt connections.
What can cause the DL Error?
So the DL code stands for improper lid closing, and it can be explained by such factors as issues with the door itself (there might be foresight objects or a part of your laundry stuck in it) or malfunction if the lock.
How to fix the DL Error?
To begin with, turn of your device for 10-15 minutes, then switch in back on, check the door for foreign objects and try to slowly close it again, waiting for the click sound, which signalizes that the lock closed properly. Press the Start button and see if the code is still displayed on the panel.
Where is the drain pump located on a washer?
Locate the drain pump on the top left side of the washtub and the recirculation pump on the top right of the tub. Short, elbow-shaped inlet hoses connect both pumps to the bottom of the washtub. Discharge hoses connect to the side of the pumps and run up the side of the washtub.
How to remove a screw from a pump?
Use a 5/16-inch nut driver to remove the screws from the pumps. Unsnap the wire covers from the ends of both pumps to reach the wire harnesses. Unplug the harnesses from the pumps. Look inside the inlet opening on both pumps. Use needle-nose pliers to remove any cloth or debris clogging the pump inlets.
