Receiving Helpdesk

why does my rpm go up and down while driving

by Tanner Mills Published 3 years ago Updated 2 years ago

Here are some possible reasons your RPM is going up and down while driving: Worn-out spark plugs. Vacuum leaks. Bad idle air control valve.Feb 11, 2022

Full Answer

Why does my rpm go up and down while driving?

To calibrate the sensor:

  • Turn the key on with the engine off and floor the gas pedal slowly.
  • While holding the gas pedal on the floor, turn off the key.
  • Again, turn the key on and put the gas pedal to the rest position.
  • If this does not work, turn to professional help.

What could cause the rpm dial to drop while driving?

could be faulty rpm sensor, or gauge depending on what you mean by freaking out jumping up and down not staying still or random jumps and drops. The worst part it could be a clutch if you are driving and the rpms go up when giving gas or putting under load only it is the clutch.

Why is the RPM needle bouncing while driving?

fluctuating RPMs / bouncing tach; any ideas?

  • Nolen87. 2017 RTS 2WD. ...
  • Shaqdiesel. Hate to admit this one but I have felt this. ...
  • smufguy. Since your truck is under warranty, take it to the dealer. ...
  • Haymoose. Same symptom. ...
  • hygieneboy. ...
  • 14v6. ...
  • JamesW. ...
  • itsatruck. ...
  • eljlzero. ...
  • Haymoose. ...

More items...

What would cause a car to stop running while driving?

Top 6 Causes When a Car Turns Off While Driving

  1. Engine Overheating. The most common reason for an engine to stop is that it is overheated. ...
  2. Low Engine Oil. Since oil is what keeps all moving metal components in an engine lubricated to keep them running with the least amount of resistance, a lack of ...
  3. Low Transmission Fluid. ...
  4. Failed Motor Mount. ...
  5. Electrical Problems. ...
  6. Bad Catalytic Converter. ...

What causes RPM to fluctuate when driving?

RPM fluctuation is a common symptom of worn-out spark plugs, especially in older vehicles. Spark plugs that are worn out are unable to correctly fire the fuel within the piston at the appropriate time. This might result in sluggish acceleration. When accelerating, your automobile may experience misfires and jerking.

What does it mean when RPM keeps going up and down?

Worn out or fouled spark plugs can cause rpm fluctuations. Check the engine vacuum and make sure there are no leaks. Leaks in the engine vacuum can cause rpm fluctuations. Replace the fuel filter if it is clogged or dirty.

Can bad spark plugs affect RPM?

Improperly functioning spark plugs cause an uneven burn of fuel in the engine, resulting in fluctuating RPMs and a louder noise.

Why is my RPM gauge jumping?

There are a number of different issues that could be causing your RPM gauge to bounce or fluctuate while you're driving. Some of those include faulty spark plugs, a bad crankshaft sensor, or a bad idle air control valve.

Is it normal for RPM to fluctuate at idle?

The idle speed should feel consistent without skipping or slipping. In most of today's cars, an idle speed of 600 to 1000 RPMs is average. If your car is idling rough, though, it won't feel smooth. The RPMs will jump up and down, for example, or they'll fall below 600 RPM (or whatever is typical for your vehicle).

Why is my car RPM not stable?

Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

What does RPM mean in a car?

RPM simply stands for revolutions per minute. It is a measuring unit for how fast a machine is working. In the case of cars, it means the number of revolutions the crankshaft in the engine makes per minute and how many times a valve goes up and down a cylinder. The RPM increases as we press the accelerator in the car and so does the power.

Why does my car's engine surge?

Multiple misfires might also be the reason for the engine to surge. The tachometer just shows what the engine does.

What does the red line on the dash mean?

At the top of the tachometer is a red line which indicates that revving the engine post can cause serious damage to the vehicle itself. This is a concern related only to manual transmission cars.

Can you hear a vacuum leak in a car?

Take it to the mechanic. If the leak is big enough, then it is quite possible for you to hear it.

Does RPM increase with acceleration?

The RPM increases as we press the accelerator in the car and so does the power. But this happens only until a certain point. It must be noted that it is not obligatory for an engine to produce its maximum power when it is at its highest RPM. It depends on a variety of factors both internal and external.

Why does my rpm fluctuate?

If any of the other issues are not found, then the problem could be with the engine. If there is any issue in the combustion or power delivery of the engine, then this would be the cause for the rpm to fluctuate. Engine problems may also lead to higher fuel combustion, therefore, get this problem fixed immediately.

How Fix Engine RPM Fluctuations While Driving?

We will discuss in this article, all the possible reasons that cause the car rpm drops while idle or driving and look for its solutions. So, let’s start.

What is a throttle pedal position sensor?

The throttle pedal position sensor is a device that monitors the position of the throttle pedal. It also controls how much air should flow into the engine. If the TPS has become faulty, your car could accelerate unexpectedly without even pressing on the accelerator pedal, causing the rpm to fluctuate. The engine light on the dashboard would turn on when the TPS has become faulty.

How to calibrate throttle sensor?

Turn off the engine, and slowly push the accelerator pedal completely touching the floor, the key should be off during this step. Now, turn the key on and release the pedal slowly. Now turn off the key. This would calibrate the throttle sensor to the right count. If your car’s rpm goes up and down while driving again take your car to a mechanic.

How to tell if vacuum leak is in car?

You can tell if there is a vacuum leak in the engine when you notice that the engine stalls unexpectedly at low speeds, or if there is too much leakage, you would hear hissing sounds from the engine. Vacuum leak should be diagnosed by a professional only, therefore, take your car to a mechanic to fix this problem. Check out the video below for some more information on the vacuum leak.

Can a bad TPS cause an unstable engine?

Apart from the RPM fluctuates while driving, a bad TPS would cause issues like an unstable engine when idle, acceleration issues, high fuel consumption, etc. A TPS could be diagnosed by a mechanic only as it requires disassembling of various components. So, if you observe any of these signs in your car, take your car to a mechanic. You could try calibrating the gas pedal by yourself.

Why is my RPM fluctuating?

Another common reason why your car’s RPM may be fluctuating is a bad idle air control valve. The control valve is needed to manage the engine idle speed so that it remains at a normal rate. If the control valve is bad, it will not execute its task well. As a result, the RPM may fluctuate.

Why is RPM important?

RPM is critical as it indicates the best time to shift into a higher or lower gear. So, if it’s not working correctly, you will have to address the problem as soon as possible. In this post, we’re going to highlight some of the factors that make the RPM fluctuate and how to fix them. These are as follows:

What is a bad crankshaft position sensor?

These are as follows: 1. A Bad Crankshaft Position Sensor. The first part to check out when your vehicle’s RPM is fluctuating is the crankshaft position sensor. The crankshaft sensor is connected to the engine block facing the timing rotor on the engine crankshaft.

What happens if you wear out spark plugs?

Worn out spark plugs can cause your car’s RPM to fluctuate. This is very common in older cars. If the spark plug is dirty or worn out, the RPM will drop or surge.

How to tell if idle air control valve is defective?

Other signs of a defective idle air control valve include rough idling, engine stalling, check engine light coming on, and load causes stalling.

How to fix crankshaft sensor?

Step 1: Before attempting any repair work on the crankshaft position sensor, you should disconnect your car battery. This helps to prevent damage to your car’s electronic panel. Step 2: Go through your car’s owner’s manual to detect the crankshaft position. This varies from one car to another.

Can a DIYer fix a car's RPM?

Some of the problems that cause the car’s RPM to fluctuate can be fixed by a DIYer, but most of them should be left for a professional mechanic.

Why does my car rev up and down?

If this sensor is not working correctly, your car might not shift gears properly, which can make be the reason why your car revs up and down while driving. Most of the time, you’ll notice your car speeding up faster, which is directly caused by your engine working harder.

Why does my car keep speeding up?

This little valve can blow and, when it does, will stop working altogether. You’ll notice that your car starts to speed up faster without you pushing on the gas or that your car will not maintain a speed even if you’re not accelerating.

What is RPM?

When you speed up and slow down, you’re changing your RPMs. RPS is revolutions per minute and is specifically talking about the number of times that the crankshaft rotates around an axis per minute. As you speed up or slow down, all of the turning and churning slows down and will rotate fewer times around per minute.

What does RPS mean in motor?

RPS is revolutions per minute and is specifically talking about the number of times that the crankshaft rotates around an axis per minute. As you speed up or slow down, all of the turning and churning slows down and will rotate fewer times around per minute.

What happens if your clutch slips?

If your clutch slips for is worn out, it won’t be able to work as well as before and won’t do its job effectively. This will mean that your car needs much more pressure to work correctly and will likely result in your car slowing down in the process.

Is it dangerous to drive up the cost?

Not only will it possibly drive up the cost but, it might also be dangerous. On the road, if you can’t control your speed, you risk getting pulled over or going an unsafe speed that’s impossible to keep up with.

Why does my RPM go up and down?

What causes RPMs to fluctuate while driving? For the engine surging making the rpm's go up and down could be caused by a defective or stuck idle air control valve (IAC). Check the IAC and see if it's working. Remove the vacuum line to the valve and see if the engine runs smooth. If the engine runs smooth, then the IAC needs to be replaced.

Why does my car idle so rough?

Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

Why is my engine erratic?

The idle is controlled by the idle air control valve and if it cannot keep the engine idling it will keep trying to rev the engine up to compensate. A vacuum leak, sensor that has failed, or an EGR system malfunction could potentially be the cause of the erratic engine you're experiencing.

Does fluid fix transmission slipping?

I've actually seen fresh fluid fix a high mileage slipping transmission that looked to have never been serviced.

Can you drive with a 3-4 clutch pack slipping?

Don't drive with it slipping just in case it's the 3-4 clutch pack, if you smoke that clutch pack the trans is toast.

Why is my shift linkage stuck?

A cause of this can be a stuck manual valve in the valve body. You can check to see if the shift linkage actually moves to the drive position when commanded. If it does, there is a hydraulic fault in...

What to do if your car is jerking when shifting?

If your car is jerking when shifting, I would first check to make sure that the transmission fluid is topped off at the proper level, as low fluid may interfere with the proper operation of the transmission. If the fluid...

What is the noise of a 2012 Panamera 4S?

The suspension on my 2012 Panamera 4S makes loud "crunching" noises when driving over bumps if the car is cold.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version2.64sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[05:50:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[05:50:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[05:50:23] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[05:50:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[05:50:23] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:50:23] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • warninglog[05:50:23] LOG.warning: explode(): Passing null to parameter #2 ($string) of type string is deprecat...
  • Booting (22.59ms)
  • Application (2.62s)
  • 1 x Application (99.13%)
    2.62s
    1 x Booting (0.85%)
    22.59ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed2.58s
    • select * from `posts` where `published_at` <= '2025-06-09 05:50:23' and `slug` = 'why-does-my-rpm-go-up-and-down-while-driving' and `posts`.`deleted_at` is null limit 1
      5.82ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-09 05:50:23
      • 1. why-does-my-rpm-go-up-and-down-while-driving
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 129440 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      9.29msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 129440
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      840μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      1.78ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      1.04ms/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      2.56s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 46156 limit 1
      780μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 46156
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        42HK37SykBbsbF9TPHaIApa26MJXGZC9FgdC4U4p
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/why-does-my-rpm-go-up-and-down-while-driving...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /why-does-my-rpm-go-up-and-down-while-driving
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.86" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "94cc767dfef9863e-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.86, 172.69.17.185" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/why-does-my-rpm-go-up-and-down-while-driving" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/why-does-my-rpm-go-up-and-down-while-driving" "REMOTE_PORT" => "59630" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.17.185" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.86" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "94cc767dfef9863e-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.86, 172.69.17.185" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749428423.4872 "REQUEST_TIME" => 1749428423 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Mon, 09 Jun 2025 00:20:23 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Im1rNDBjdWl3NXA2ZTlzdVlNL0h5YXc9PSIsInZhbHVlIjoiUzBGYW56Y3daYlNLL3hQamFCZktrQW5FcEZFcUMyMU04aEVVTFdmTmdhNHdmSmtjRC9KQk5nMk1LbGlZNlMvbytYaDcycVM2K2gvQ1JLbzBZeGNoTEpYUzl6dG9hbFdjWi84YjMxamFqRGkzVWQ0S0JYQnZYZTZOenNNVWZBR0YiLCJtYWMiOiJiNTNjYTJlYWY1MTNkNjBjZGM4ZDI5YzBiY2M4MTcyY2JlOGQ1ZjVhOTllZWMxZGJhNjBhMjMyZDdlNWE3YjcxIiwidGFnIjoiIn0%3D; expires=Mon, 09-Jun-2025 02:20:26 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6Im1rNDBjdWl3NXA2ZTlzdVlNL0h5YXc9PSIsInZhbHVlIjoiUzBGYW56Y3daYlNLL3hQamFCZktrQW5FcEZFcUMyMU04aEVVTFdmTmdhNHdmSmtjRC9KQk5nMk1LbGlZNlMvbytYaDcyc" 1 => "askhelpdesk_session=eyJpdiI6ImR2UmkySUJzbVBzWHR3bXlZWU5qTHc9PSIsInZhbHVlIjoiK3dCWjFtcThhak1YZFVSZ3MzRURWZGlhcHA3Tlg0ODdXKzUzcmZ0Z255SkZPbTJMTS9xd0p4dTZrSGdLbnNzaHlyM2pPRG5sSFJSTTdqQlRoYmpEMnY4NDA5VHZRUXF6K2pTcDFzM3lpT2pEUDBXMFhJeHpzUUFiSDVSZlFBZkUiLCJtYWMiOiIxZTAyYThmYzE3M2ZlMGI2ODRhYjA0ZTk1MDdkMDQ3NWM4OTI0NjQwYTY2MGIwZjJlZmNjNDdlMmQyZTRmMDVkIiwidGFnIjoiIn0%3D; expires=Mon, 09-Jun-2025 02:20:26 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6ImR2UmkySUJzbVBzWHR3bXlZWU5qTHc9PSIsInZhbHVlIjoiK3dCWjFtcThhak1YZFVSZ3MzRURWZGlhcHA3Tlg0ODdXKzUzcmZ0Z255SkZPbTJMTS9xd0p4dTZrSGdLbnNz" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6Im1rNDBjdWl3NXA2ZTlzdVlNL0h5YXc9PSIsInZhbHVlIjoiUzBGYW56Y3daYlNLL3hQamFCZktrQW5FcEZFcUMyMU04aEVVTFdmTmdhNHdmSmtjRC9KQk5nMk1LbGlZNlMvbytYaDcycVM2K2gvQ1JLbzBZeGNoTEpYUzl6dG9hbFdjWi84YjMxamFqRGkzVWQ0S0JYQnZYZTZOenNNVWZBR0YiLCJtYWMiOiJiNTNjYTJlYWY1MTNkNjBjZGM4ZDI5YzBiY2M4MTcyY2JlOGQ1ZjVhOTllZWMxZGJhNjBhMjMyZDdlNWE3YjcxIiwidGFnIjoiIn0%3D; expires=Mon, 09-Jun-2025 02:20:26 GMT; path=/XSRF-TOKEN=eyJpdiI6Im1rNDBjdWl3NXA2ZTlzdVlNL0h5YXc9PSIsInZhbHVlIjoiUzBGYW56Y3daYlNLL3hQamFCZktrQW5FcEZFcUMyMU04aEVVTFdmTmdhNHdmSmtjRC9KQk5nMk1LbGlZNlMvbytYaDcyc" 1 => "askhelpdesk_session=eyJpdiI6ImR2UmkySUJzbVBzWHR3bXlZWU5qTHc9PSIsInZhbHVlIjoiK3dCWjFtcThhak1YZFVSZ3MzRURWZGlhcHA3Tlg0ODdXKzUzcmZ0Z255SkZPbTJMTS9xd0p4dTZrSGdLbnNzaHlyM2pPRG5sSFJSTTdqQlRoYmpEMnY4NDA5VHZRUXF6K2pTcDFzM3lpT2pEUDBXMFhJeHpzUUFiSDVSZlFBZkUiLCJtYWMiOiIxZTAyYThmYzE3M2ZlMGI2ODRhYjA0ZTk1MDdkMDQ3NWM4OTI0NjQwYTY2MGIwZjJlZmNjNDdlMmQyZTRmMDVkIiwidGFnIjoiIn0%3D; expires=Mon, 09-Jun-2025 02:20:26 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6ImR2UmkySUJzbVBzWHR3bXlZWU5qTHc9PSIsInZhbHVlIjoiK3dCWjFtcThhak1YZFVSZ3MzRURWZGlhcHA3Tlg0ODdXKzUzcmZ0Z255SkZPbTJMTS9xd0p4dTZrSGdLbnNz" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "42HK37SykBbsbF9TPHaIApa26MJXGZC9FgdC4U4p" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/why-does-my-rpm-go-up-and-down-while-driving" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]