The Reasons Why Mobility Scooters Don’t Move
- Magnetic Brakes. ...
- Battery Power. ...
- Motor (Faulty Wiring) The problem can also come from the mobility scooter’s motor, which may have loose wires inside it. ...
- Motor (Overheating) Overheating happens during summertime or if a mobility scooter is overworked, exceeding its daily limit.
- Wheels Cannot Turn. ...
- Storage. ...
- Faulty Switching. ...
Why do mobility scooters break down so often?
The most common cause of mobility scooter breakdowns is the battery. With constant charging and discharging, scooter batteries lose their ability to hold charge. Most modern scooters will alert you when the battery needs replacing, but first, you should check the battery connections to make sure they are secure and seated properly.
What should I do if my mobility scooter won’t start?
Solution: If you can, check for any loose wires connecting the motor or battery. Open up the battery and motor compartments and see if any of the wires feels loose or looks out of place. If you can’t find any, ask a technician to take a look. The motor is one of the hardiest components of a mobility scooter.
What causes a scooter motor to stop working?
Directing a hose towards the motor, leaving the scooter in the rain or driving in deep puddles can all cause the motor to fail which then cuts off power to the wheels.
Why is my GO-GO scooter not turning on?
In other rare circumstances, it could be a loss of signal due to a wire getting cut or disconnected somewhere between the controller and the motor. At the end of the day, it would be best if you had a highly trained and experienced mobility scooter that has worked with Go-Go’s to take a look at it.
Why is my electric scooter cutting out?
If you experience that your scooter shuts off or cuts out while riding, it most likely means that your circuit breaker has been tripped. Check your circuit breaker and see if it is very warm or has loose wires. Make sure the wires are secured properly. Overloading or steep inclines can cause the breaker to trip.
Why does my mobility scooter keep slowing down?
The other most common issue of a mobility scooter going slow would be the electronic brake failure. Most mobility scooters have electromagnetic brakes. This simply means that when you lift the throttle, you'll notice the scooter stops.
How do you reset a mobility scooter?
Push the main circuit breaker button to reset the motor. On some scooters, this is labeled the RESET button.
Why is my mobility scooter beeping and not moving?
Beep Codes. Condition: The battery voltage is to low and can not power up the scooter. Solution: Replace charge the scooter completely, or replace the batteries. Condition: The battery voltage is to high and the scooter can not operate.
What is the reset button for on a mobility scooter?
Reset Button When the scooter is running on a low battery, the main circuit breaker may trip to prevent damage to the motor and electronics. Naturally, all the electrical systems go offline when the breaker trips. This will cause the reset button to pop out at the rear section of your scooter.
Should I leave my mobility scooter on charge all the time?
Charge your scooter overnight once a week when not in use There's no such thing as 'overcharging' the battery on a mobility scooter, so don't be afraid to leave yours charging overnight. Most chargers are now fitted with a cut-off, meaning that they will simply turn off when the battery is fully charged.
What is the average life of a mobility scooter?
A typical mobility scooter will last eighteen to twenty-four months with proper care and usage.
Why is the red light flashing on my mobility scooter?
If the charging indicator on the battery charger is showing solid or flashing red, this means it is properly charging the battery and the battery is accepting the charge. The older the battery, the longer it may take to recharge but batteries will generally recharge near fully.
How do you troubleshoot an electric scooter?
If the Motor Does Not Run Follow the Following StepsMake Sure the power switch is on.Check the fuse or circuit breaker.Try pushing the scooter to start.Try charging the battery pack for full hours.Inspect the motor by sight, touch and smell.Test the fuse or circuit breaker and also the brake lever switch.More items...
What goes wrong with mobility scooters?
Batteries. The most common cause of mobility scooter breakdowns is the battery. With constant charging and discharging, scooter batteries lose their ability to hold charge.
How do you test a mobility scooter motor?
0:040:46How To Test Motor Resistance For A Mobility Scooter - YouTubeYouTubeStart of suggested clipEnd of suggested clipThat the proper reading for ohms of a functioning motor is going to be 0.5 to 1.5 ohms so it's halfMoreThat the proper reading for ohms of a functioning motor is going to be 0.5 to 1.5 ohms so it's half an ohm to 1.5 ohms so as you can see. This one here is within the range it's 0.5.
How do I stop my mobility scooter from beeping?
0:523:01Mobility Scooter Beeping Noise - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's telling you that the brake is on and there's a break if you look at the back behind the seat.MoreIt's telling you that the brake is on and there's a break if you look at the back behind the seat. If you look behind the seat there's a little yellow thing sticking out can you see this here.
Why Mobility Scooters Stall
In recent years, mobility scooters have become easier to obtain by those who need them and have become more widely used. Whether you help someone who uses a mobility scooter, or you use one yourself, ensuring they work properly is key.
Battery Issues
The best batteries for mobility scooters sorted by customer ratings may be found here.
Faulty Motors
The electric motor on your mobility scooter is usually a simple design and can be quite rugged, ensuring that it can withstand normal use. Most use their mobility scooter in all types of terrain and in a variety of weather conditions, trusting that they work without damage.
Search for a Loose Connection
We touched on this when it came to discussing the battery, but identifying any loose connections is extremely important when it comes to a mobility scooter that has been stalling. Sometimes a loose connection can be causing these unwanted problems, and the repair is extremely simple.
Check for a Faulty Switch
A faulty switch on your scooter can cause you to stop suddenly and can cause the device to fail to start. This is a lesser-known problem but can easily be repaired if you find the faulty switch at hand. If you have noticed your scooter stalling, not starting, even going into reverse without your control, a switch can be the problem.
Motors
Mobility scooters have a durable electric motor designed to withstand everyday use. The engine is responsible for moving the scooter, similar to the body muscles. When it comes to motor reliability, it provides long-lasting service. But over time and irregular use gradually develops problems, and when neglected, it results in total broken down.
Battery
If the motor is responsible for moving the scooter, the battery supplies energy to the engine to run the scooter and do its job. However, the battery lasts less than the motor, thus makes it the most common cause of mobility scooter breakdown.
Tire
Like other parts of the mobility scooter, the tire is subject to wear out, but even so, it has enough capability to sustain its durability and efficiency. But try to imagine the things it often goes through every time you use your scooter. It is susceptible to dirt, mud, grass, debris, and more.
Potentiometer
It is related to throttle control because it dictates how slow or fast the scooter will run. When it fails, you will notice that your scooter is slowing down even though you did not intentionally lower its speed.
Ignition Switch
The ignition switch of a mobility scooter is very similar to that of riding lawnmowers or other cars.
Fix or buy a new one?
Honestly, you can choose either of the two. It just depends on your budget. When deciding first, calculate the cost of repairing any broken or damaged parts of the scooter, then compare the total cost with what you will spend on buying new ones.
Final Thoughts
Mobility scooters are a useful asset and life-changing for people with disabilities and the elderly. These mobility devices allow them to stay social and independent. But like other mechanical devices, it is prone to breakdown, and as a result, its users hinder from doing the things they want to do with their scooter.
Why is my scooter not working?
If most of your scooter is working fine and one specific part isn’t, it may be a sign of a blown fuse.
Why does my scooter pull to the right?
This can be caused by years of use, or a particularly bumpy ride.
Why does my scooter battery wear down?
The Cause: Batteries wear down over time. If you’ve had your mobility scooter for a few years, or tend to run the battery all the way down each time you use it, chances are it will show signs of degrading. This could lead to loss of speed, range, and even a non-working mobility scooter.
Why are my scooter tires so bad?
The Cause: Over time, the tread on your tires will wear down, making them ineffective. Similarly, the inner tubes in your tires may also deteriorate or be punctured. Worn/flat tires make your mobility scooter inefficient at best and outright dangerous at worst.
What does a potentiometer tell you?
The Potentiometer is directly related to the throttle control; it’s what tells the scooter how fast or slow it should go. If you notice your scooter suddenly slowing down when you didn’t tell it to, your potentiometer could be failing.
What does it mean when a scooter is lurching forward?
If you notice your scooter is “lurching” forward randomly while using it, that’s a sign that the motor has begun to fail.
Why won't my scooter start?
Check Your Connections: Sometimes, the reason your scooter won’t start is simply that the battery is slightly loose in its seat.
What causes a mobility scooter to break down?
If your mobility scooter breaks down without an obvious reason such as an accident, then the cause is most likely to be found amongst the following issues: battery, motor, tires, potentiometer, controller/joystick, or ignition key . Let us take a closer look at each of these problems and how you can resolve them. 1.
Why is my scooter not traveling?
Your scooter doesn't cover as much distance as it used to: When you start to notice that your mobility scooter isn't able to travel as far as it used to, chances are this is due to a battery malfunction.
What type of tires do scooters use?
The common types of mobility scooter tires include foam-filled tires, pneumatic tires (filler with air), and solid urethane tires.
Why does my scooter battery fail?
It is to be expected for the battery on a mobility scooter to fail due to constant charging and discharging, which causes the battery to lose its ability to hold a charge.
How many volts should a scooter battery be?
If either one measures below 11 volts, you should dispose of it. A battery that reads 12 volts or more without a load on the scooter is a keeper. Even though most scooter batteries are affordable, you want to keep them in good working condition for as long as possible.
What is a mobility scooter?
Owning a mobility scooter is a life-changing event for disabled or elderly people as they rely on these machines to get around without needing to hire a car service or use walking aids. While they're extremely useful in giving people their independence back as best as possible, mobility scooters are still just like any other mechanical ...
How to remove a broken off key from a scooter?
This often causes the ignition key to get stuck or break off. Not to worry, as you can safely remove a broken-off key from the ignition by using a pair of tweezers . If you cannot remove the key with tweezers, you can use a pair of needle-nose pliers to start the scooter by twisting the head of the broken key.
Magnetic Brakes
Mobility scooters may sometimes suddenly stop because of the faulty wiring inside the electric scooter. The cables connected to magnetic breaks can affect the vehicle’s performance if they are loosely connected. Users must check the quality of wirings in the magnetic brakes and should call an electrician if it looks terrible.
Battery Power
Sometimes, the problem can be as simple as a ‘low-bat’ mobility scooter that needs a complete charge. Beeping in these scooters usually means asking for a full charge before running again on maximum performance. Also, users should not bring their equipment outside half-charged because of the limitations and headaches that might follow.
Motor (Faulty Wiring)
The problem can also come from the mobility scooter’s motor, which may have loose wires inside it. Whether the cables are loose or clamped, they can prevent the engine from spinning, preventing the wheels from moving.
Motor (Overheating)
Overheating happens during summertime or if a mobility scooter is overworked, exceeding its daily limit. When this happens, turning off the scooter until the motor cools down should be the user’s top priority. Forcing an overheating engine to work even further might cause an explosion, which will cause more severe problems.
Wheels Cannot Turn
Do you hear the motor running, but for some reason, the mobility scooter can’t move whatever you do? Some of its wheels might not be rotating correctly, causing the entire vehicle to get stuck and unable to move where the user desires.
Storage
If the storage of the mobility scooter is not well ventilated, meaning there’s no way for air to come in and out, then it’s at risk. The cooling process can slow down when a room doesn’t have enough ventilation, keeping the motor tired long after turning off.
Faulty Switching
Sometimes, switching might malfunction and cannot activate a mobility scooter because of faulty wirings behind it. Riders may use a multimeter to test if their vehicle’s switch has a problem or only needs a couple of repeated clicks or flips in the button.
What are the problems with a mobility scooter?
Most mobility scooter proprietors have different issues eventually including lights not working, scooter not start, solidified wheels, consistent signaling sounds, etc. We briefly discuss the most common problems and their solutions to the mobility scooter.
What does it mean when a scooter halts?
You are simply moving along when without notice the engine cuts off and the mobility scooter halts. For certain users, it happens when they are going up or down a kerb. For other people, it’s bound to happen when going up an incline. For some others, it simply happens to pay little mind to where they are.
Why is my scooter breaking?
1. Battery Issues. The most well-known reason for mobility scooter breakdowns is the battery. With steady charging and discharging, scooter batteries lose their capacity to hold a charge. You should check the battery connections with ensuring they are secure and situated appropriately.
What is a fuse on a scooter?
A fuse is wired through many different parts of a mobility scooter. It distributes the electricity to prevents overload. If one specific part of your scooter isn’t working well, considering it’s a blown a fuse. It’s not a big problem; you just have to change the fuse you can do yourself.
What causes a scooter ignition key to stick?
A faulty switch is a typical issue of mobility scooter. They are presented to the components and inclined to consumption. This can cause the ignition key to stick or sever. If you have a severed key in the start, it can frequently be securely evacuated by utilizing a couple of tweezers.
How to check if a battery is loose?
If you can, check for any loose wires connecting the engine or battery. Open up the battery and engine compartments. Then check whether any of the wires feel loose or looks strange. If you can’t discover any, request a technician to investigate.
Can you fix arm sets on a scooter?
Arm sets ensure safety and comfort. So it’s the most needed accessories you need. Once the arm sets are worn, you can’t fix them. So you have to replace them.
What does it mean when a scooter stops?
Most mobility scooters have electromagnetic brakes. This simply means that when you lift the throttle, you’ll notice the scooter stops. If this system is malfunctioning or your brakes are engaging slightly, you won’t be able to hit full speed.
Why is my scooter not going at full speed?
There is another reason why the scooter may not be going at full speed and that is due to the Throttle Pot. Throttle Pot is short for the throttle potentiometer. You’ll need to get a voltmeter and measure the ohms.
Can you rob a scooter of power?
However, these may be more difficult for you to identify. For instance, if your motor is overheating, you can be robbing your scooter of power. Also, motors are an expensive fix. In many instances, it may not be much more money to purchase a new mobility scooter.
Batteries
The most common cause of mobility scooter breakdowns is the battery. With constant charging and discharging, scooter batteries lose their ability to hold charge. Most modern scooters will alert you when the battery needs replacing, but first, you should check the battery connections to make sure they are secure and seated properly.
Motors
The motors on mobility scooters are extremely reliable, but if you have an older scooter you may experience some flat spots, which is when the motor temporarily drops to a lower output causing the scooter to “bump” along.
Tyres
Mobility scooter tyres are hard wearing and are designed to last many hundreds of miles, but will still need replacing from time to time. Mobility scooters are available with two types of tyre, solid and pneumatic. Solid tyres are harder wearing but they are not as comfortable as pneumatic tyres, so you may prefer the latter.
The Potentiometer
If the speed of your mobility scooter fluctuates without reason, this is a sign of a faulty potentiometer or throttle pot. The potentiometer allows the user to control forward and backward motion by using a simple lever. Potentiometers are often exposed to the elements so can suffer from corrosion which causes the unit to fail.
The Ignition switch
A faulty ignition switch is a common problem on mobility scooters. Like potentiometers, they are exposed to the elements and prone to corrosion. This can cause the ignition key to stick or break off. If you have a broken-off key in the ignition, it can often be safely removed by using a pair tweezers.
