- Poor Airflow The most common cause of your dryer’s heating element burning out is blocked ventilation. ...
- Faulty Temperature Shut-off Switch Even if the conditions of the dryer should lead to your heating elements burning out, it is possible that your heating element can be saved. ...
- Power Surges
What makes the heating elements go out on a dryer?
What Makes Heating Elements Go Out on Dryers? A dryer's heating element operates on the same principle as the coil in an electric heater. It consists of an uninsulated metal conductor and when an electric current passes through it, its resistance to the flow of electricity makes it heat up.
Why does my dryer keep burning out the breaker?
The root cause is poor airflow. Lint Lint Lint. Clean out everything that air flows through, the exhaust pipe to the out side and inside the dryer. Make sure the squirrel cage fan is turning and cleaned. The dryer would be popping the breaker, not burning out the element, if the circuit was the problem.
What causes a dryer to overheat?
The main cause of dryer overheating is insufficient venting, and the venting may be that way for a number of reasons. A vent pipe that follows a circuitous route is more likely to cause overheating because its maximum allowable length decreases with the number of bends in the pipe.
What should I do if my dryer element is overheating?
Even if your dryer overheats, one or more of the dryer's in-built safeguards should protect the element. If your element repeatedly burns out, therefore, you should check the continuity of the cycling thermostat and high-limit thermostat.
How long should dryer heating element last?
The heating element can last between 8 and 18 years if the dryer is well-maintained and the vent and lint traps are clean. The heating element can burn out if the dryer is not kept well-maintained.
Why does my heating element keep breaking?
Elements can also break if they overheat. This may happen if your oven's thermostat is malfunctioning - the thermostat is supposed to switch off the element once the oven has reached the desired temperature, but if that doesn't happen, the element may continue to heat up until it breaks.
Is it worth replacing a heating element in a dryer?
If your dryer's heating element burns out more than once within a year or two, the thermal fuse, which is supposed to protect it, is probably defective, so it's a good idea to replace it. The temperature in the heating chamber may also be too high, and that may be caused by poor venting.
Why does my Samsung dryer keep burning heating elements?
The element usually burns out due to wear and tear and a failure to keep the ventilation clear, which puts pressure on the heating element. The heating element can be visually checked for coils that are damaged or grounded. If a coil is broken, the element will likely need to be replaced.
How much is a thermal fuse for a dryer?
It should cost between 5 to 8 dollars. Helpful?
How long should an electric dryer last?
10-13 yearsHow long does a dryer last? A dryer should last 10-13 years. To extend the dryer's life, clean the lint trap after each use and make sure the outer vent is clear as well.
Is it worth it to repair a 10 year old dryer?
If the dryer is past its life expectancy, it may be cheaper to replace it versus to try to repair it. For dryers, it's hitting the end of its run generally 10–13 years after the purchase date.
How much does it cost to replace a dryer thermostat?
Most homeowners pay between $100 and $200 for dryer repair. For example, replacing a broken thermostat costs about $150, but prices range depending on the problem.