why do my touch lamps turn on by themselves

Why do my touch lamps turn on by themselves? Touch lamps work by energizing the lamp casing with a low current AC signal. When you touch it, the capacitance

in your body has the effect of taking away some of that signal, which is detected by the circuit inside the lamp and triggers it to turn the lamp on or off.

Full Answer

Why does my lamp turn on by itself?

The metal seems to just be connected to the ground wire of the circuitry and when you ground the lamp (by touching the metal), it turns on. Heres the thing- it turns on by itself at random times.

What happens when you touch the lamp?

We have a touch lamp where when we touch it, it gets brighter and brighter until it goes off again. Last nite I turned off the lamp and went to bed. I wake up and my wife says "why did you turn the lamp on"?

Why does my touch light switch on and off?

Unfortunately, after many months of experimenting with configuration changes at his end, and shielding solutions at our end, the only answer was to throw the lamps away and use something more conventional. People sometimes use spray polish to clean these touch lamps which stops them working or causes them to switch on and off.

How does a touch on light work?

Touch lamps work by energizing the lamp casing with a low current AC signal. When you touch it, the capacitance in your body has the effect of taking away some of that signal, which is detected by the circuit inside the lamp and triggers it to turn the lamp on or off. Click to see full answer.

Why do touch lamps turn on by themselves?

Touch lamps work by energizing the lamp casing with a low current AC signal. When you touch it, the capacitance in your body has the effect of taking away some of that signal, which is detected by the circuit inside the lamp and triggers it to turn the lamp on or off.Mar 8, 2009

Why does my touch light keep going on and off?

It is this wire that gives the lamp the ability to turn the light on and off when you touch any metal on the lamp. The control box can be damaged by minor power surges. When this happens, the touch lamp will remain in the “On” or “Off” position. Resetting the touch lamp requires replacing the touch-control box.

Are touch lamps a fire hazard?

Smoke Or Burning Smells The module in a touch lamp can overheat and cause a burning smell, even if it does not start a fire.Jul 21, 2017

What activates a touch lamp?

A touch-sensitive lamp is one that is activated by human touch rather than a flip, push-button, or other mechanical switch. These lamps are popular as desk and nightstand lamps. They act on the principle of body capacitance.

How do you fix a touch sensitive lamp?

How to Troubleshoot a Touch LampInspect your touch lamp's lamp cord for damage. ... Unplug the touch lamp from the outlet. ... Plug the touch lamp into a working outlet. ... Check the bulb for a damaged filament. ... Unplug the touch lamp and remove the light bulb if it still doesn't work. ... Remove the light bulb and unplug the lamp.More items...

How do I fix my touch lamp?

0:4827:16DIY Home Repair: Touch Lamps - YouTubeYouTubeStart of suggested clipEnd of suggested clipOr you can use a cord switch something like this to where you just I'll show you where you can cutMoreOr you can use a cord switch something like this to where you just I'll show you where you can cut the cord install one of these and then you just use a switch in the court.

Why did my lamp catch fire?

Brittle wiring is one factor that can lead to light bulb fires. Wires in a bulb that get brittle due to an excess amount of heat as a result of having wattage that exceeds specifications can cause a bulb to catch fire. This can be especially common with wires inside walls and ceilings.

Is it OK to leave lamps on all night?

It's a common feature in most homes. But, Is it safe? Low wattage LED bulbs are safe to leave on all night without the risk of overheating or fire. While this will result in a minor increase in electricity consumption, leaving some lights on can help with fear of the dark, easier navigation, and security.May 4, 2021

Can lamps start fire?

Yes, it can! Any kind of light bulbs, from fluorescent to incandescent to halogen, can cause fires if they are not used correctly. Here are the specific features on common household light bulbs that can potentially lead to fire.Sep 15, 2019

How long do friendship lamps stay on?

You are correct that the minimum time that friendship lamps light up is 30 minutes, however they can also be set up to stay lit for 1 1/2 hours, 4 hours, 8 hours, and 24 hours.

Why does my touch lamp keep flickering?

Touch lamps that use different intensities -- low, medium and high -- have bulbs that flicker on and off at different speeds. Other causes for flickering of the touch light are power usage from another appliance, a loose bulb or a dusty socket. Unplug the lamp, wait for it to cool and remove the bulb.Jul 17, 2017

How do you make a touch sensitive switch?

0:273:02How to make a touch sensitive button or switch - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere we have the painting connected to the chip with a wire. When I attach the coin my body changesMoreHere we have the painting connected to the chip with a wire. When I attach the coin my body changes its capacitance the chip detects this and responds by turning on the LED.

Touch Sensitive Light Turning on by Itself : AskEngineers

A couple of things can cause it. When the circuitry gets old the internal components can begin failing, most of the touch lamps work off a change in capacitance that occurs because you touch the metal, if the lamp is old, that circuitry can begin to fail making the lamp too sensitive to capacitance changes.

Touch lamp turning on by itself at night??? - Eng-Tips Forums

Touch lamps are just trouble waiting to happen. The control is very sensitive and susceptible to all kinds of misoperations. Any type of RFI, such as cell phones, cordless phones, and computers can cause these things to come on and off.

Touch Lamps Come On By Themselves But Only at Night?

I have a set of two touch lamps. We had used the lamps at another house without incident. The first night I used the lights in my new house, I left one of the lamps on when I went to bed but when I got up the next morning, both lamps were on. The next night I didn't leave either lamp on but when I woke up, both were on. Last night I didn't leave either on but one was on when I got up.

Touch Sensitive Switch Turning Itself On

About five years ago I built a curio cabinet for my wife with two internal puck lamps. The lamps are controlled by a small, round, dome shaped touch switch on the back of the cabinet.

Mechanical Engineers turned Software Engineers, what changed, and how did you do it?

I'm curious to know what led some of you people into software engineering/development that were once a mechanical engineer or some other engineer unrelated to SE.

Offered director of engineering job, but not sure if I am experienced enough?

I have 2 years of experience in an unrelated field ( big pharma). The director role is for an energy/gas company for a small rural county. To be honest , I am not sure how I even got the offer. Would I be crazy to take it? I am just worried that my lack of experience will affect my career later on and I will get fired . Opinions welcome.

Is one week enough time for your notice?

I got an offer for 35% more base salary – or a net of 47% more if I include the sign on bonus, or a net of 60% more if I also include the EOY bonus (if I get it) – and I want to make sure I give my current employer enough time to respond with a counter offer if they seriously want to retain me.

Anyone have an experience leaving a job they actually liked? Did you regret it?

I'm on the cusp of signing a contract to go work for a new company. However I don't think I'd fall under the usual description of why people leave. I love my job, I'm compensated extremely well, and overall have no real problems with staying.

The question that supposedly impresses an interviewer

Some career counselors suggest that during an interview, you should ask the interviewer "Do you have any reservations about my candidacy?" and then address any reservations they have. This strategy supposedly works for non-technical interviews, but I'm not sure it would work in engineering interviews.

Where does one hire a sex toy engineer? What does that process entail?

Engineers apply the knowledge of math & science to design and manufacture maintainable systems used to solve specific problems. AskEngineers is a forum for questions about the technologies, standards, and processes used to design & build these systems, as well as for questions about the engineering profession and its many disciplines.