What information is on the SDS?
| SDS Section and Heading | SDS Section and Heading | Specific Information Elements |
| 1 | Identification | Product identifier (e.g. Product name) O ... |
| 2 | Hazard identification | Hazard classification (class, category o ... |
| 3 | Composition/Information on ingredients | When a hazardous product is a material o ... |
| 4 | First-aid measures | First-aid measures by route of exposure: ... |
| SDS Section and Heading | |
|---|---|
| 1 | Identification |
| 2 | Hazard identification |
| 3 | Composition/Information on ingredients |
| 4 | First-aid measures |
Is WHMIS 2015 safety data sheets-an improvement over MSDS's?
WHMIS 2015 Safety Data Sheets - An Improvement Over MSDS's? WHMIS 2015 Safety Data Sheets – An Improvement Over MSDS’s? WHMIS 2015 Safety Data Sheets (SDSs) are summary documents containing information on the hazards posed by various products and providing instruction and advice on the necessary safety precautions.
Does WHMIS 2015 allow information about environmental hazards?
This group (and its classes) was not adopted in WHMIS 2015. However, you may see the environmental classes listed on labels and Safety Data Sheets (SDSs). Including information about environmental hazards is allowed by WHMIS 2015. What is a hazard class? Hazard classes are a way of grouping together products that have similar properties.
What is the difference between WHMIS 1988 and 2015?
In the process, the original data sheets, the Material Safety Data Sheets (MSDS) outlined in the original WHMIS have been updated and re-named Safety Data Sheets (SDS). And for clarity, the original WHMIS is now called WHMIS 1988 while the updated version is called WHMIS 2015.
What are the WHMIS 2015 supplier requirements as regulated by the government?
This document discusses the WHMIS 2015 supplier requirements as regulated by the federal legislation – the Hazardous Products Act and the Hazardous Products Regulations (HPR). Health Canada is the government body responsible for the overall WHMIS supplier-related laws.
What are the 16 sections of the SDS?
Information in the SDS should be presented using the following 16 headings in the order given below:Identification.Hazard(s) identification.Composition/information on ingredients.First-aid measures.Fire-fighting measures.Accidental release measures.Handling and Storage.Exposure controls/personal protection.More items...
What are the sections included in a SDS?
The SDS includes information such as the properties of each chemical; the physical, health, and environmental health hazards; protective measures; and safety precautions for handling, storing, and transporting the chemical.
What are the 3 key sections on a SDS?
SDS Parts 1-3: Basic Chemical DetailsSection 1: Identification includes the basic information about the chemical itself. ... Section 2: Hazard Identification describes the product's chemical hazards. ... Section 3: Composition/Information on Ingredients identifies what the product is made of, in chemical terms.More items...
How many sections are in a Whmis compliant SDS?
16-sectionSDSs must follow a standard 16-section format. There are some new information requirements, for example, inclusion of the WHMIS classification, hazard statements and other label elements in Section 2. For further information, see the WHMIS 2015 Safety Data Sheets Fact Sheet.
What are 5 key things that an SDS tells you?
It provides information on:Identification: for the product and supplier.Hazards: physical (fire and reactivity) and health.Prevention: steps you can take to work safely, reduce or prevent exposure, or in an emergency.Response: appropriate responses in various situations (e.g., first-aid, fire, accidental release).
What is Section 4 of the SDS?
Section 4—First-aid measures: Required first aid treatment for exposure to a chemical and the symptoms (immediate or delayed) of exposure. Section 5—Fire-fighting measures: The techniques and equipment recommended for extinguishing a fire involving the chemical and hazards that may be created during combustion.
What is Section 2 of the SDS?
Section 2 – Hazard(s) identification includes the hazards of the chemical and the appropriate warning information associated with those hazards. Section 3 – Composition/information on ingredients identifies the ingredient(s) contained in the product indicated on the SDS, including impurities and stabilizing additives.
Which sections of the SDS tells you how do you protect yourself?
Which sections of an SDS tell you how to protect yourself? Section 7 of an SDS, handling & storage tells you how to work safely with a hazardous product and the steps you need to take in order to protect yourself.
What information is included in the first section of the SDS?
Section 1 identifies the chemicals on the SDS and recommended uses. It also provides contact information for the supplier. Information required in this section includes: The product identifier used on the label and any common names or synonyms which the substance is known.
How many sections are there in WHMIS 2015?
16-WHMIS 2015 sets out requirements for safety data sheets (SDS) in Part 4 of the Hazardous Products Regulations (HPR). Schedule 1, of the HPR, sets out the 16-heading SDS format and the content required under each of the 16 headings.
How many hazard groups are there in WHMIS 2015?
two majorWHMIS 2015 applies to two major groups of hazards: physical, and health.
What is WHMIS SDS?
WHMIS/GHS/(M)SDS WHMIS is a comprehensive system for providing information on the safe use of hazardous products in Canadian workplaces, via product labels, (M)SDSs ((material) safety data sheets), and worker education and training programs.
From MSDS to SDS
In the process, the original data sheets, the Material Safety Data Sheets (MSDS) outlined in the original WHMIS have been updated and re-named Safety Data Sheets (SDS). And for clarity, the original WHMIS is now called WHMIS 1988 while the updated version is called WHMIS 2015.
Similarities and Differences between MSDSs and SDSs
WHMIS 2015 replaces MSDSs (Material Safety Data Sheets) with SDSs (Safety Data Sheets) to improve the classification of hazards, improve employer involvement in workplace safety, ensure safe handling of hazardous products and enhance emergency measures. Still, there are several similarities between the two types of sheets.
Responsibilities of Stakeholders During the Transition Period
During the transition period, I mporters, Manufacturers, and Suppliers of hazardous products should learn and understand the GHS criteria and:
The Caveats
A couple of important points Suppliers must keep in mind when taking advantage of this new amendment, is that when choosing to list one of the prescribed ranges as a trade secret mechanism, there must be a qualifying statement added, immediately following the prescribed ranges on an SDS, that identifies the prescribed concentration range as a trade secret..
Toni-Ann McLean
Toni-Ann McLean has over 17 years experience with writing MSDSs/SDSs for the protection of workers and emergency personnel, as well as determining labeling requirements for the protection of consumers, and of workers and emergency personnel.