Where is the control lock on Whirlpool washer?
- Locate the " Control Lock /Unlock" button on your Duet's control panel.
- Press and hold the " Control Lock /Unlock" button for three seconds.
- Release the " Control Lock /Unlock" button when the control lock icon on the display disappears.
How do you unlock control on Whirlpool washer?
Method 3 Method 3 of 3: Unlocking the Door Manually
- Power down the washer. Press and hold the Power button to turn off the machine. ...
- Seal off the faucet. After the washer is completely unplugged, close the water faucet that feeds into the machine.
- Get to the drain pump access door by unscrewing the cover. ...
- Tug on the plastic cord in the compartment to unlock the washer door. ...
How do I unlock my Whirlpool washing machine?
How to Unlock a Whirlpool Washer
- Method 1 Method 1 of 3: Opening a Front-Loading Washer. Hit Cancel to stop the load and unlock the door. ...
- Method 2 Method 2 of 3: Accessing a Top-Loading Washer. Push the Start/Stop button to unlock the washer door during the spin cycle. ...
- Method 3 Method 3 of 3: Unlocking the Door Manually. Power down the washer. ...
How do you unlock a Whirlpool dishwasher?
How do you unlock a whirlpool quiet partner 1 dishwasher?
- Turn on the hot water at the faucet closest to your dishwasher and wait until the water becomes hot.
- Leave the dishwasher door open as you reset it by pressing "heated dry," "normal," "heated dry" and "normal" in quick succession.
- Run the dishwasher.
How do you unlock a whirlpool duet washer?
You can manually unlock the washer by removing the top (remove screws on the back of the top panel and slide the top panel back to lift off. How to unlock the controls for a whirlpool duet washer. Hold down the “control lock” button on your whirlpool washer for three seconds at the end of the washing cycle.
How do you unlock the control panel on a Whirlpool washer?
When you are ready to resume use of the washer, you must first unlock the control panel.Locate the "Control Lock/Unlock" button on your Duet's control panel. ... Press and hold the "Control Lock/Unlock" button for three seconds.Release the "Control Lock/Unlock" button when the control lock icon on the display disappears.
How do I unlock my Whirlpool Control Lock?
Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says "Control Lock Hold 3 Sec" under it for 3 seconds.15-Jun-2020
How do you manually unlock a Whirlpool washer?
Hold down the "Control Lock" button on your Whirlpool washer for three seconds at the end of the washing cycle. Listen, and when you hear the unlatching sound, the door should open.
How do you unlock the controls on a washing machine?
Washer - Front Load Washer Control Lock To lock or unlock the washer controls: Press and hold the LOCK button for 3 seconds. A sound is made to indicate the lock/unlock status. The control lock icon on the display will light up when the feature is on.
How do you reset the Control Lock on a Whirlpool washer?
How do you reset the control lock on a Whirlpool washer? Select and hold END OF CYCLE SIGNAL for 3 seconds. The CONTROL LOCKED status light glows. Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off.07-May-2020
How do you reset the control board on a Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
Why is my Whirlpool washer not unlocking?
The most common cause of a Whirlpool washer door being locked and not being able to open is a faulty lid switch (including the striker). The door switch locks and unlocks your door depending on which stage your wash cycle is at. When it becomes defective, your washer door may not unlock when it's supposed to.07-Jun-2021
Why is my washer locked and won't open?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do I turn off the Control Lock on my Whirlpool Duet washer?
Select and hold END OF CYCLE SIGNAL for 3 seconds. The CONTROL LOCKED status light glows. Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off.26-Sept-2011
How do you unlock the controls on a Whirlpool oven?
How do you gain access to the controls on an oven? Press and hold on to the lock for 3 seconds to lock the control panel. The light above the lock will turn on. Press and hold LOCK for 3 seconds to open the control panel.
How do I turn off the control lock on my Whirlpool oven?
To turn the control lock setting off, press and hold the START button for 3 seconds. If this doesn't work, turn the oven off at the circuit breaker for 1 minute. When the circuit breaker is turned back on, the error code should be gone.01-Dec-2020
Why is my Whirlpool dishwasher stuck on control lock?
Release the control lock by pressing and holding the "Control Lock," "Heated Dry" or "No Heat Dry" key pad for three seconds. The control lock light or icon should go out. Repeat the process to set the control lock again.
How do you unlock the control panel on a Whirlpool oven?
Whirlpool Oven Door is Locked - What Should I Do?Press Cancel/Off key to start a latch reset, wait 20-30 seconds and open door.Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on.More items...•14-Dec-2019
How do I turn off control lock on my dishwasher?
0:031:12KitchenAid Control Lock function on your dishwasher - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe control lock light will be illuminated if a key is pressed on the control the control lock lightMoreThe control lock light will be illuminated if a key is pressed on the control the control lock light will flash three times to alert you that the control is locked to turn off the control lock press.
How to unlock the door on a washing machine?
1. Push the Start/Stop button to unlock the washer door during the spin cycle. Pause the machine by quickly pressing the Start/Stop button once. After a few seconds, the washer will halt and you’ll hear the door unlocking. Add any extra garments into the washing drum at this time, if necessary.
What to do if your washer door is stuck?
Helpful 0 Not Helpful 1. If your washer door is stuck after completing a cycle, contact a repair person or a Whirlpool representative about your problem. If you live in the United States, call Whirlpool at 1-800-253-1301. If you’re a Canadian resident, contact Whirlpool at 1-800-807-6777. Thanks!
How long does it take to unlock a washer door?
It’s not difficult to unlock your washer door, but depending on your model, it could take a few minutes. If you have a front-loading washer, add clothes while the “Add Garment” light is on or cancel the cycle altogether. If you have top-loading washer, all you have to do is pause the cycle. Steps.
What You Need
To unlock control lock on whirlpool washer, you don’t need any power tools. If you don’t have any experience using mechanic gadgets, you can rest easy and follow the tutorial without using one.
What to Do to Unlock Whirlpool Washer Control Lock
Before you can unlock your washer, you need to make sure it’s plugged in first. After the washer has started, look for the button that indicates “Control Lock”. It is usually located on the panel at the top of the washer. Once you have found the panel, look for the unlocking button, then proceed to the next step.
Frequently Asked Questions
Reset the washer by unplugging it for 30 seconds to solve this problem. Once done, run a duet washer quick diagnostic test. Press the Pause/Cancel button if you want to stop diagnosing the washer.
Conclusion
Did you learn much from our tutorial on how to unlock Whirlpool duet washer control lock? If your washer is not working, check if it is in the lock mode, then follow the instructions above. It will only take you a few seconds. Aside from that, you don’t need tools to unlock your washer.
How to bypass a Whirlpool top load washer lid?
If your Whirlpool top load washer won’t unlock, a magnet can bypass the lock to open the lid. Unplug the washer and move it away from the wall. Remove the top panel by pushing in its retaining tabs ...
Why won't my washer open?
When the switch comes in contact with the strike, it locks the lid and signals the control panel to begin a wash cycle. The plastic strike can crack, break or become misaligned with wear and tear or if the lid is slammed down. When this happens, it may be unable to engage the lid switch or leave the washer door locked, won’t open.
What You Need
- Hit Cancel to stop the load and unlock the door. Press and hold the Cancel button to turn off the load and cancel the cycle. This bypasses any locking mechanism, including the Control Lock. Once the machine is turned off for several seconds, press the Power button to turn the machine back on.[1] X Research source The Control Lock button freezes your control panel s…
- Select a new cycle and start the load as normal. Wait several minutes for any remaining wate…
What to Do to Unlock Whirlpool Washer Control Lock
Frequently Asked Questions
Conclusion