Where to Place the Toilet in Your Bathroom
- Consider the Front Clearance. Many cities and states require toilets to be placed a set distance away from other fixtures and bathroom features.
- Measure to the Side Walls or Fixtures. ...
- Check the Ideal Place for the Rough-In. ...
- Pay Attention to the Door Swing. ...
How to choose the right toilet for your bathroom?
Toilet Design Explained
- Keeping your toilet clean. As we have said before, a one-piece toilet is easier to keep clean, simply because it is free from hidden crevices and corners where bacteria or ...
- Functionality. One thing that you will find consistent with both a one-piece and a two-piece toilet is the functionality of both.
- Installing your new toilet. ...
- Leak-Proof. ...
How much space is needed around a toilet?
You also need to make sure that there are at least 4 inches of space between the far edge of your toilet and the wall. This means that you need at least 30 inches of space to accommodate a toilet without violating the building code requirements.
How to install a toilet paper holder in a bathroom?
- Drill pilot holes through your pencil marks.
- If you must attach your toilet paper holder to dry wall, tap in wall anchors to make sure the brackets will hold.
- Use a level to check drill holes and adjust if necessary.
How to make PVC door in toilet and bathroom?
toilet and bathroom door makingPVC door using en box covered,PVC doors best water proofPVC doors best rust proofPVC doors fire resistancePVC doors turme...
Which facing is good for toilet?
The toilet seat should always be placed in such a direction that the person using it would be facing the northern or southern direction of the home. This will keep the health of the family members balanced.25-Jun-2021
Should the toilet go next to the bath?
Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.01-Mar-2021
Can toilet Face east?
The only thumb rule is to avoid facing East while sitting on the toilet seat. East being the direction of the rising sun is best avoided for a toilet seat facing. Some Vastu gurus say that a toilet seat should not face North and some say it should not face South.07-Jan-2022
How far does a toilet need to be from the sink?
Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.)
How do you layout a bathroom?
Cater to your bathroom layout's negative space. ... Avoid emptiness in a bathroom layout. ... Revolve your bathroom layout around a key feature. ... Choose the statement bath layout. ... Pick the bath and separate shower layout for large bathrooms. ... Save space with the over-bath shower layout. ... Select the shower room layout for small spaces.More items...•29-Mar-2021
Can you put a toilet next to a kitchen?
As long as it has a door, AND a wash-basin between the pan and the door, you can have the toilet leading from the kitchen. There should also be means of ventilation, at the very least a window with trickle vent and an opening window.28-Apr-2006
What if toilet is in east?
Let's begin with the East direction. The construction of toilets in the east can disturb your life. Troubles may get clouded over you. Your older child's growth may be hindered.23-Nov-2019
What if toilet is in south east?
The construction of toilets in the southeast direction is not auspicious. Loss of money is possible due to having toilets in this direction. There will also be hurdles in trade and development.25-Nov-2019
Why toilets should not face east?
Avoid installing the toilet in the north-east or center or south-west corner of your house. According to Vastu Shastra, north-east is a very important direction that commands worship. A bathroom with attached toilet can be equated to toxin and hence, cannot be built here.07-Mar-2022
How far should a toilet be from a wall?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
How close can a toilet be to a bathtub?
It is recommended that the distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle should be at least 18 inches. The minimum distance from the centerline of a toilet and/or bidet to any bath fixture, wall, or other obstacle is 15 inches.
How much space does a toilet take up?
A standard toilet is from 28 to 30 inches deep, and the waste opening is usually just in front of the tank, so the hole should be roughly 40 inches from the facing wall. You also need room behind the hole for the toilet to fit, which is 12 inches from the center of the hole to the finished wall for a standard toilet.19-Jan-2022
Why are wall mounted toilets so popular?
Wall-mounted toilets are great for smaller spaces because the tank is inside the wall. In this installation, you can see that the builder brought the wall forward for this wall-mounted toilet's water carrier to create a ledge above the sink and toilet for the flush activator.
Do wall mount toilets need a carrier?
Installing a wall-mount toilet is a chore. All of them require a wall carrier to support the toilet, and some have very exact water supply positions, which allows for little flexibility in location. However, the look is seamless and modern and has some functional benefits as well.
How much space do you need for a toilet?
For many users, however, 21 inches is not enough; the recommended amount of floor space in front of a toilet is 30 inches. This means that nothing, including a wall, sink, toilet or shower can come within 21 to 30 inches of the front edge of the toilet bowl. Plan on positioning your toilet along a wall where there is nothing directly opposite ...
How much space does a toilet need to pass code?
Moving your toilet's waste pipe back by 2 inches can sometimes be enough to ensure that your toilet passes code by giving you those 2 inches of additional clear floor space.
What is the rough in size of a toilet?
The rough-in is the measurement of the back of the finished wall to the center of the waste pipe in the floor.
Can you put a toilet near an entryway?
The amount of space in a small bathroom often comes at a premium, which may lead you to position the toilet near an entryway. If this is done, however, take care that the swing of the door entering the room does not interfere with the user of the toilet.
Can a toilet be placed near a door?
If the toilet must be placed near the door to meet other building codes, hang the door itself so it swings out into the hall, rather than into the bathroom, or consider installing a pocket door to eliminate the need for a swinging door.
Do you have to have clear floor space in front of toilet?
In addition to requiring clear floor space in front of the toilet, building code and accepted rules of bathroom design outlined by the National Kitchen and Bath Association as reported by CRD Design Build also require space on each side of the toilet.
Is it bad to have a toilet sitting close to a shower door?
There is nothing worse than having a toilet sitting so close to the shower the door makes contact. In this bathroom pictured, the owner has carefully considered the space needed in the middle of the bathroom to accommodate the glass shower door. You’ll notice the toilet is tucked conveniently around the corner.
Is a loo a toilet?
So to avoid this disappointment, it should be one of the first things to ponder in the blueprint stages of your renovation. After all, it’s not just a toilet.
Who is Jessica Prince-Montague?
Here are some things to consider. Jessica Prince-Montague May 25, 2014. By Jessica Prince-Montague. Houzz Contributor. Sydney-based freelance editor and journalist with 10 years experience working in the fashion and lifestyle domain.
How to tighten a closet bolt?
Tighten the nuts with a wrench one quarter turn at a time, alternating between the two. Stop when the wrench meets firm resistance; overtightening will crack the bowl. With a hacksaw, trim the closet bolts at a point two threads above the top of the nut. Snap the plastic bolt covers into place.
How to clean a stop valve?
Clean the inside and outside of the pipe and the inside of the valve's inlet using a wire-brush pipe cleaner. Apply flux to both areas. Slip the escutcheon over the supply line, followed by the stop valve; the valve's outlet should point upward. Heat the supply line stop valve joint with a propane torch.
How long does it take to replace a toilet?
Estimated Time. 4 to 6 hours. If your trusty toilet has developed cracks or leaks, uses far too much water per flush, or is simply a shade of baby blue not seen in 20 years, it may be time to replace it. You might consider this a good time to put in a call to the plumber, but it can be all in a day's work for a reasonably handy DIY-er.
How wide is an alcove tub?
With alcove bathtub bathrooms, the width must be exactly 60 inches, in order to accommodate the 59 1/2-inch bathtub.
What does it mean to put a bathroom in a building?
Knowing where to put the bathroom when building or remodeling is just as important, if not more important, as bathroom space or layout planning. Where one leads, the other follows: bathroom location often dictates the bathroom layout. A wisely placed bathroom means the difference between an efficient, smooth, and economical build or remodel, ...
How much does an empty bathtub weigh?
An empty acrylic bathtub and surround combination can weigh about 200 pounds, while a bathtub full of water may weigh between 500 and 750 pounds. A ceramic or porcelain tile floor, combined with an underlayment, thinset, and grout, also can weigh hundreds of pounds.
What is the size of a sewer line?
Sewer Line: A large three- to four-inch pipe connects to the toilet flange, and this pipe must drain from the home to the sewer main located under the street. Electrical: Bathrooms are heavy users of electricity, with the electrical code specifying a minimum number, type, and placement of electrical outlets and lights.
What is shared wall?
The shared wall serves as a type of utilities core, with electrical lines, water supply, drainage, and sewer line running through that wall. The two bathrooms often are mirrored to save on money: sinks, toilets, and showers or bathtubs are repeated at the same place on each side of the wall.
What is a heavy bathroom?
Bathrooms are heavy rooms. Not only are the individual elements heavy—toilet, cabinet, sink, tile, flooring, and bathtub and shower—but when filled with water and items, their weights increase exponentially.
What are the main concerns when deciding where to put the bathroom?
Of the utilities, water supply and drainage are the main concerns when deciding where to put the bathroom, followed closely by electrical and ducting issues. Water Supply: Incoming hot and cold water lines are needed for the sink and for the bathtub, shower, or tub/shower combination. Drain System: The sink and the bathing facilities both need ...
How small is a toilet macerating unit?
The unit can be attached to a pipe as small as one inch because the macerating unit churns the waste from the toilet into a liquid effluent that can be easily pumped through these tiny pipes.
What is float switch?
The float switch normally controls the entire operation, turning the pump on once the water in the basin reaches a certain level. So, if you had always dreamed about installing that toilet in the basement or in the garage so you didn’t have to run all the way upstairs to do your business, you are finally in luck.
Can you install a macerating toilet anywhere?
The biggest benefit that you receive when you purchase a macerating toilet is that they can be installed anywhere in the house whether you have a traditional plumbing or drainage system or not.
Can you install a sewage pump below the main drain?
For those who believe they are out of luck because their toilet location is below the main drain, don’t worry, we have a solution for you too. Because waste doesn’ t need to be liquefied for easier transport through the small-diameter pipe, you can install a sewage ejector pump.
Can you put a toilet under stairs?
Not only can you install a toilet under the stairs , but it is becoming more common every single day and it can actually increase the value of your home. These toilets are both convenient and accessible.
Can you have a port a potty with a portable toilet?
it’s a great option that can help a parent out immensely. Macerating toilets are portable. Yes, you literally have your own port-a-potty (much ...
Can you have a port a potty in your basement?
Yes, you literally have your own port-a-potty (mu ch cleaner, obviously) within the confines of your home. Say you decide to update your basement and realize the macerating toilet would be better suited upstairs, only four screws need to be removed and the toilet can be reinstalled.