Configuration files are stored in the following locations:
- The running configuration is stored in RAM.
- On all platforms except the Class A Flash file system platforms, the startup configuration is stored in nonvolatile random-access memory (NVRAM).
- On Class A Flash file system platforms, the startup configuration is stored in the location specified by the CONFIG_FILE environment variable. ...
Where is startup configuration stored in Linux?
A startup configuration is stored in the nonvolatile memory of a device, which means that all configuration changes are saved even if the device loses power. To copy your running configuration into the startup configuration you need to type the command copy running-configuration startup-configuration .
Where is the startup configuration file stored in Cisco switch?
The startup configuration file is stored NVRAM (Nonvolatile RAM), so it is retained even after the device loses power. where is the running config stored Cisco? The running configuration is stored in RAM; the startup configuration is stored in NVRAM.
How to copy running configuration to startup configuration?
A startup configuration is stored in the nonvolatile memory of a device, which means that all configuration changes are saved even if the device loses power. To copy your running configuration into the startup configuration you need to type the command copy running-configuration startup-configuration.
Where is the Startup folder in Windows 10?
Up until Windows 8, you could view and change these applications directly from the Start menu. As of version 8.1 and higher, including Windows 10, you can only access the startup folder from your personal user files. There is also an All Users startup folder in addition to your personal startup folder.
Where is the running configuration stored in the switch?
The two configuration files can be different. The startup configuration is stored in the NVRAM section of flash memory and is persistent; the running configuration is stored in DRAM and is replaced by the startup configuration at the next reboot.
Where is startup-config stored on ASA?
By default, a firewall stores its startup configuration in a hidden partition of flash memory. That file has no usable name and can be viewed only through the show startup-configuration command.
How do I find my Cisco startup-config?
Use the show running-config command to view the running configuration file. Use the show startup-config command to view the startup configuration file. You can configure a switch in the Cisco MDS 9000 Family by using configuration files you create or download from another switch.
Is the startup-config stored in flash?
The write memory command stores the runtime configuration in a flash file called startup-config. txt. During bootup, the system reads and applies the startup-config.
How do I copy startup config to running-config?
Use the command copy running-config startup-config (copy run start) to overwrite the current startup config file with what is currently in the running configuration file.
What is startup config Cisco?
For the Cisco 7000 family, the show startup-config command shows the configuration file specified by the CONFIG_FILE environment variable. The Cisco IOS software informs you whether the displayed configuration is a complete configuration or a distilled version.
What is startup-config command?
The show startup-config command shows the startup configuration that would be used by this unit if it were operating in regular mode as a switch or router. In PE or Provisional-PE mode, the show configuration command shows the configuration in the PE startup file for this unit.
How can I see running configuration?
The show running-config command displays the current running configuration on the FWSM. You can use the running-config keyword only in the show running-config command. You cannot use this keyword with no or clear, or as a standalone command, because the CLI treats it as a nonsupported command.
What memory location holds the running configuration file?
The running configuration is stored in RAM; the startup configuration is stored in NVRAM.
What is startup configuration file?
The startup configuration is the configuration your devices run on when they reboot or power up. The running configuration is the current version of the configuration file the device runs on.
What is stored in the NVRAM of a Cisco router?
NVRAM is non-volatile RAM. By "non-volatile", we mean that the contents of NVRAM are not lost when the router is powered down or reloaded. Where RAM holds the running configuration file, NVRAM holds the startup configuration file. If NVRAM is empty when the router reloads, you will be prompted to enter setup mode.
Where are Cisco configuration files stored?
The Cisco configuration files are stored in an ASCII text form that can be easily copied in many terminal emulators or SSH sessions. When a router builds its configuration to display the running configuration, a text representation becomes available once it has completed the process. Cisco routers also can be directed to save their running configurations in a startup file which will be recalled when the router reboots. This saved configuration is stored in non-volatile memory called flash memory which allows it to be written to many times and retain its contents when the electrical power is removed.
What is the reg add command?
You use the Reg Add command to add new subkeys or entries to the Registry. The Reg Delete command deletes a specified subkey or an entry from the Registry. The syntax of these commands is:
Can I upload Cisco router configuration files?
The benefit to this is that you can upload your Cisco router configuration files onto your routers by using a Telnet application, such as HyperTerminal, or by reversing the TFTP command you used to get the configurations backed up . This can be pretty important to do, as you have the ability to restore the routers’ configuration to a predictable state. However, you must ensure that the backup configuration files have not been modified or altered in any way!
What is the startup folder?
The startup folder typically only contains links to the programs that you want to start automatically. However, the startup folder can also contain any other files (such as scripts) that you want to run when you log on. In addition to the programs in the Windows 10 startup folder, there are other files that are a permanent part ...
Where is the startup folder in Windows 10?
As mentioned earlier, the startup folder in Windows 10 is no longer listed directly in the Start menu, although both the user-specific and All Users startup folders are still in the Start menu directory. Here are the exact locations of these folders:
Why add programs to startup folder?
The main reason for adding applications, services, or scripts to the startup folder is obvious: If you use programs or processes that you need or want to run automatically when you log on , you can save a lot of time by adding them to your startup folder. If you’re an administrator, you can even add programs directly to the shared startup folder ...
How does malware take advantage of the autostart function of these keys?
Most malware takes advantage of the autostart function of these keys by placing malicious programs in the above registry keys so that the programs run automatically without your knowledge every time you boot up Windows.
Do you have to manage core services in Windows 10?
The core services that Windows 10 requires to function properly are automatically loaded when Windows boots up. You don’t have to manage these processes, nor are you able to. However, you have the freedom to manage installed user software on your own computer or as a system administrator.
