Locate the Test/Silence button
| Model Number | Silence Button Location |
| 0827B | Button below the First Alert logo |
| 3120B | Top of alarm, above First Alert logo |
| 7010B | Top of alarm, above First Alert logo |
| 7020BSL | On the edge of the alarm, to the left of ... |
| Model Number | Silence Button Location |
|---|---|
| 7030BSL | On the edge of the alarm, to the left of the First Alert logo |
| 9120B | Button underneath First Alert logo |
| CO400 | Front of alarm, in the center |
| CO605 | Front of alarm, in the center |
What does the silence button do on a smoke alarm?
For example, if someone in the house accidentally burned a piece of toast, you can silence the alarm and open a few windows while the smoke clears. The Silence button does not disable the unit.
Where is the test/silence button on my alarm?
Locate the Test/Silence button Model Number Silence Button Location P1010 Atom / Micro Alarm Button on side of alarm PR710 / P1210 Rectangular button to the left of the Fi ... PRC710V / PC1210V Rectangular button to the left of the Fi ... PRC710 / PC1210 Rectangular button to the left of the Fi ... 19 more rows ...
How do I get my smoke detector to go silent?
Blow bursts of compressed air against the vents on the side of the smoke detector. The moving air will provide the detector's sensor with the programmed type of response that indicates there is no smoke present. The alarm will go silent. Marshal M. Rosenthal is a technology maven with more than 15 years of editorial experience.
How do I silence a First Alert 9120b smoke alarm?
The First Alert 9120B smoke alarm is extremely easy to silence. After all, there's only one button to press, so it's easy to turn off even when you're rattled. The one button is the silence/test button. Pressing it once will silence the alarm but only temporarily.
How do I get my First Alert smoke detector to stop beeping?
Insert a fresh Duracell, Energizer, or Everready battery to stop the chirp. Make sure the battery is facing the right direction. Close the battery drawer fully. If chirping persists, remove residual charge from the old battery.
Where is smoke alarm hush button?
While the chirps may be annoying, they're far less bothersome than having to wave a towel in front of the smoke alarm to get it to turn off every few minutes. In most cases, you can find the 'hush' button on the smoke detector's cover.
How do you put a smoke detector on silent?
Take the smoke detector off its mounting bracket on the ceiling and disconnect the power cable plugged to the smoke detector. Take out its battery, then press the “Test” button holding it down for 15 seconds. An alarm will sound for a short time, then the alarm will silence.
How do I turn hush mode off?
The "HUSH" feature can be used repeatedly until the air has been cleared of the condition causing the alarm. Pushing the Test/Reset button on the alarm will end the hush period.
What happens when you push the button on a smoke detector?
The smoke detector has one button, which is the reset button. Push and hold the reset button for 3 seconds to turn off the smoke detector. Because the smoke detectors are located on the ceiling, a chair or broom may be helpful to reach the reset button.
How do I silence my alarm?
1:363:53And this goes for most alarm systems you're gonna look on the keypad. There's gonna be somethingMoreAnd this goes for most alarm systems you're gonna look on the keypad. There's gonna be something that says. Off if you look right here number one says off.
How do I get my fire alarm to stop beeping every 30 seconds?
0:463:11Number one replace the batteries. The most probable issue is that the smoke detector needs newMoreNumber one replace the batteries. The most probable issue is that the smoke detector needs new batteries.
How do you know if your smoke alarm is in silence?
You'll know that your smoke alarm is in temporary silence mode if the red LED light flashes once every 10 seconds. Advertisement.
Where is the battery compartment on a smoke alarm?
The latch to open the battery compartment is located on the side of the smoke alarm .
How many piercings does a 9120B smoke detector have?
You'll know it when you hear it, but just so you're prepared, if your 9120B smoke alarm is activated by smoke, it will sound off with three piercing beeps and then pause and continue with three piercing beeps. This sound pattern repeats on all connected smoke alarms, and the beeps are accompanied by a rapidly flashing red LED light.
How long does it take for a smoke detector to mute?
The one button is the silence/test button. Pressing it once will silence the alarm but only temporarily. Your unwanted alarm will mute for 10 minutes, giving you an opportunity to clear the smoke from the room. If the smoke alarm becomes irritated by increased levels of smoke, it will sound off again to alert you to a potentially life-threatening ...
Can you silence a smoke alarm?
You can silence your smoke alarm. Image Credit: Image Source/Photodisc/GettyImages. A properly functioning smoke alarm is literally a lifesaver, but sometimes, these alarms work a little too well and beep, chirp or wail when you're just cooking an extra-smoky meal or when the tool is trying to get your attention for some regular maintenance. ...
Can a smoke alarm be set up for multiple devices?
Some smoke alarm systems are set up for multiple devices to sound throughout the house or facility so everyone knows to evacuate. If multiple interconnected First Alert 9120B smoke alarms are singing their ear-splitting song together when there's no real danger at hand, you can promptly shush all of them.
How to silence a smoke alarm?
Step 1: Silence your alarm. To silence a nuisance alarm, press and hold the Test/Silence button on your unit. This will quiet the horn so you can find what caused the alarm. If you're not able to find the button, read our guide for more help: Use the Silence Button on Smoke or CO Alarms. Step 2: Review these fixes.
Why are smoke alarms more susceptible to noise?
Smoke alarms placed near a cold air return are more susceptible to nuisance alarms because dusty air can be blown through the alarm sensing chamber. Alarms may look clean, but dust can accumulate inside the cover, especially in newly built homes. Gently vacuum smoke alarms regularly using the soft brush attachment.
What causes a nuisance alarm in the winter?
Dirt, drywall dust, and construction debris are often present in ductwork. The winter season’s first use of the furnace can cause fine particles to be blown through the house possibly causing nuisance alarms . Nuisance alarms tend to increase during the fall.
What causes false alarms?
• Humidity. Smoke alarms are susceptible to nuisance alarms when placed near a bathroom or other potentially high humidity area. • HVAC vents.
Can a hot wire disconnect a smoke alarm?
In AC or AC/DC smoke alarms, a loose hot wire connection can also disconnect power to the smoke alarm. The effect is the same as a power failure. When power is restored, the units may alarm briefly. If any of this might be the case in your home, we recommend reaching out to an electrician.
Can you see smoke in an AC/DC system?
In a system of interconnected AC or AC/DC alarms, the unit triggering the alarm may be in another part of the home - smoke may be present, but you can't see it. • Large appliances on the same circuit as the alarms. A large current load like a vacuum cleaner on the same circuit may cause nuisance alarms.
1. Reset The Smoke Alarm
An excellent old reset is always a useful option when your smoke alarm is making noises. But the problem is that resetting smoke alarms is a little complicated. The reason, it that these devices are hardwired together.
2. Test The Silent Button
Your smoke alarm has a mute button that allows you to prevent it from making unnecessary beeping. However, the mute button sometimes turns off all by itself, causing it to still make noises.
3. Check for dirt
If you reset your alarm and the beeping did not stop, then chances are there is dirt or dust stuck in between the detector and the wall. This dust and dirt buildup inhibits the sensors, causing the smoke alarm to make noises.
Silence and diagnose the false alarm
To silence a nuisance alarm, press and hold the Silence Button on your unit. This will quiet the horn so you can find what caused the alarm.
Contact Us
If you continue to experience problems with false alarms after troubleshooting, please email Tech Support email Tech Support or give us a call to discuss options for replacement:
What is the test button on a smoke alarm?
In ionization smoke alarms, the test button puts an electric load on the sensing chamber, causing the alarm to react as though there was smoke present. This also tests the battery and the rest of the circuitry and is an accurate method for testing the sensing chamber.
Where is the test button on a ear protection?
While wearing ear protection, press the Test/Silence button until you hear the test sequence. The test button is usually found on the side or top of your unit. Refer to your user’s manual or full instructions and a description of your detector's test sequence.
