425 Serial Location Serial number decal on the right side of the 425 tractor frame, above and behind the front axle.
What are the details on a John Deere 425 tractor?
Engine details ... Transmission details ... Open operator station. John Deere 425 photos... Rear PTO optional. Tractor must be off for shifting between rear, mid, or both PTOs. Full dimensions and tires ... Attachment details ... FAQ: How to read a serial number table.
How do I find the serial number on my John Deere?
In older models it is possible that the serial number has worn away or the plate damaged or missing, in these circumstances the best way to trace the serial number of your John Deere is to ask the person you purchased it from and try to track it back down the line of purchase to the original dealer.
What is the serial number on a John Deere Waterloo Works tractor?
Serial number information John Deere Waterloo Works recently changed from a 13-digit large tractor serial number to a 17-digit serial number.
How do I find the model number on a riding lawn mower?
As seen in the example, the model number will be displayed below the MODEL heading (Example: Z235), and the serial number will be underlined on the top-right corner of the tag (Example: 130002). If you're looking for the engine number, that can be found directly on the engine itself. Locate ID Numbers on Riding Mowers
Where is the serial number located on a John Deere?
Model & Serial Number Location The model serial number of a John Deere lawn mower is printed on an identification tag located on the left side of the deck (standing behind the mower).
What years did they make John Deere 425?
Produced at John Deere's Wisconsin factory from 1992 through 2001, the 425 John Deere was part of the high-quality 400 series of garden tractors that also included the 445 and 455.
How many horsepower is a John Deere 425?
Specifications. The engine is 20 HP with 17 liters fuel capacity. The John Deere 425 weighs approximately 400 kilos, heavier than the preceding John Deere 420.
What engine is in a John Deere 425?
John Deere 425 EngineEngine DetailKawasaki FD620DDisplacement617 cc 37.7 ciBore/Stroke2.992x2.68 inches 76 x 68 mmPower20 hp 14.9 kW14 more rows•Feb 22, 2022
What is the difference between a John Deere 425 and 445?
445 is fuel injection, 425 is carburetor. 445 has a little more power, like 2-5 hp.
How much engine oil does a John Deere 425 hold?
The 425 lawn tractor uses two types of oil: engine oil and hydraulic oil. The engine oil capacity with the oil filter installed is 1.5 quarts, or 1.4 liters.
How do you tell what year your John Deere mower is?
Stand behind your John Deere lawn tractor and look to the bottom left hand corner near the left tire to locate the identification tag. This metal plate attached to the frame of the mower provides you with the tractor's model and serial number. Tags may be located under the hood or along the front on older models.
What does a John Deere 420 weigh?
John Deere 420Dimensions & TiresWeight:3250 lbs 1474 kgFront tire:5.00-15Rear tire:9-24Full dimensions and tires ...Jan 31, 2022
How much oil does a John Deere z425 take?
4. Place drain pan with at least a 6.1 L (1.65 gal) capacity under hydraulic oil filter, turn filter counterclockwise to remove and allow oil to drain completely.
What replaced JD 425?
Part of the successful 400 Series of lawn and garden tractors, the John Deere 445 was a step up from the 425. It offered owners a 22HP liquid-cooled V-twin 2-cyl Kawasaki engine with a shaft-driven hydrostatic transmission.
How often should I change the oil in my John Deere tractor?
John Deere recommends you check your oil level before each use and to change your oil once a season. That's about every 50 hours of lawn tractor use.
Where is the engine number on a push mower?
The engine number can be found directly on the engine. Locate ID Numbers on Push Mowers. To find the ID tag on your push mower, look directly on the mower deck. If you're looking for the engine number, it will be located directly on the engine.
How to find the ID tag on a push mower?
To find the ID tag on your push mower, look directly on the mower deck. If you're looking for the engine number, it will be located directly on the engine. Locations for the engine number may vary depending on engine type and manufacturer.
Where is the ID tag on a lawn tractor?
A lawn tractor usually has the ID tag under the front right wheel.
Where is the ID tag on a zero turn mower?
The tag will be located right above the engine on the frame, or underneath the engine. Also, the engine number will be listed directly on the engine.
How many serial numbers are in a John Deere tractor?
Most serial numbers will be either 13 or 17 digits, but tractors built in the 1960s-1970s may only have 5 or 6 digits. Whilst John Deere have factories throughout the world not all locations produce the same models, which include agriculture, lawn and ground care machinery.
Where are John Deere tractors made?
Deere and Company has manufacturing facilities throughout the world, and they still produce tractors from the original site in Waterloo, Iowa, USA.
