Receiving Helpdesk

where is the learn button on a raynor garage door opener

by Magdalen Dach Published 3 years ago Updated 2 years ago

Where is the Learn button on a Raynor garage door opener?

  • Press the remote control program button until the LED light turns on.
  • Press and release the “Learn” button on the opener.
  • Press and hold the button on your remote while the indicator light on the opener is glowing.
  • Test the programmed button on your remote.

Press and release the LEARN button on the overhead garage door opener unit. The learn indicator light will glow steadily for 30 seconds. Within this 30 second time period, press and hold the button on the hand-held remote. Next, release the button when the overhead opener unit's lights blink.

Full Answer

Where is the open/close button on a Raynor Garage door opener?

On the Raynor remote model G893RGX, that button is located under the visor clip. 2. Choose an open/close button to use for your garage door. Press that button a number of times that corresponds to the type of garage door opener you have.

Where is the learn button on a garage door opener?

– Find the antenna at the bottom of the garage door opener. – If you have a light cover over the control panel, remove it so you can view the dashboard. – The exact color and shape of your learn button depend on the model of your opener. You will see either a square or circular green, purple, orange, red or yellow button.

Where can I buy Raynor Garage door lubricant?

This specially formulated garage door lubricant can be purchased from a Raynor Authorized Dealer in your area. Apply the Door Lube to each of the following areas of the door: hinges, rollers (bearings and shafts), springs and end bearings (located at each end of the spring shaft).

What are the different types of Raynor openers?

Distinctions Series Raynor StyleView RockCreeke Country Manor Eden Coast by Raynor Aspen Series Aspen Series Aspen AP200LV LuxeVue Aspen AP200N Contempra Aspen AP200 Aspen AP138 Traditions Series Traditions Series Masterpiece ShowCase Advantage Series Advantage Series TradeMark BuildMark Openers Openers Ultra II with WiFi Prodigy II with WiFi

Where is the Learn button on an older Raynor garage door opener?

The "Learn" button on your garage door opener is located above the antenna wire that hangs from the motorhead, it may also be under a light cover. The "Learn" button will be either green, red/orange, purple or yellow.

How do you sync a Raynor garage door opener to your car?

Press the “SMART BUTTON” or “LEARN BUTTON” on the Raynor opener for one second and release. (Note: you only have 30 seconds in which to initiate step 5.) Return to the vehicle and firmly press the programmed HomeLink button TWO times (press and hold each time for two seconds).

Where is the Learn button garage door?

0:001:00How to Find the Learn Button on Your Garage Door Operator - YouTubeYouTubeStart of suggested clipEnd of suggested clipYour learn button will be located on the main panel. And for some operators with an antenna wire.MoreYour learn button will be located on the main panel. And for some operators with an antenna wire. Just follow the wire which leads to the panel with the learn button on the panel.

What if my garage door opener doesn't have a Learn button?

If there is no learn button, examine the inside of the old remote by popping the back off of it. If there is a series of small switches, only big enough to be slid one way or another by the end of a pencil, you have a DIP switch unit. Make sure you purchase a universal remote with internal DIP switches.

How do I program my Raynor garage door opener without the button?

How to Program Garage Remote without Learn Button?Step 1: Check the controller type you are using. ... Step 2: Study the control panel for a few minutes. ... Step 3: Press the programming button. ... Step 4: Restore default settings. ... Step 5: Set the code new. ... Step 6: Make a conscious switch. ... Step 7: Leave the sides down.More items...

How do I program my Raynor garage door opener to my car without a remote?

You can't program a garage door opener without a remote controller. But you can use your remote transmitter to reset the garage door opener buttons inside your car. Or you can use an electronic keypad to control the door without a remote. For keypads, press the arrow buttons and the program buttons simultaneously.

Where is the Learn button on a legacy garage door opener?

0:031:34How to Program Your Garage Door Remote Control - YouTubeYouTubeStart of suggested clipEnd of suggested clipFind this learn button sometimes. It's under a light cover. And you have to open that light coverMoreFind this learn button sometimes. It's under a light cover. And you have to open that light cover but it's always going to be where all your wires. Are going into the end of the machine.

Where is the Learn button on Odyssey 1000?

4:106:13How to Program a Garage Door Opener | Odyssey® 1000 Model 7030YouTubeStart of suggested clipEnd of suggested clipTo begin press and hold the program button and be up/down arrow buttons. Until the lights go.MoreTo begin press and hold the program button and be up/down arrow buttons. Until the lights go.

What are the three buttons on a garage door opener for?

The one button just opens the garage door. The three button has one to lock the door (if compatible) and one for the light.

How do you reset an old garage door opener?

Locate the LEARN button on the control panel. Press and hold the LEARN button until the LED light turns off. This will reset the opener and delink the keypad and any remote controls previously set to operate the garage opener. The light bulb inside the opening unit will flash, letting you know the reset is successful.

How do I reprogram my garage door remote?

1:512:35How to Program your Garage Door Remote & Keypad - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo recap first you find your learned button press your learn button they'd open remote you press theMoreTo recap first you find your learned button press your learn button they'd open remote you press the button you want to program with the keypad.

Which button is the Learn button on LiftMaster?

For a LiftMaster garage door opener, you will find the learn button on the back of the machine after following these steps: – Find the antenna at the bottom of the garage door opener. – If you have a light cover over the control panel, remove it so you can view the dashboard.Nov 23, 2021

Where is the learn button on a garage door opener?

The "Learn" button on your garage door opener is located above the antenna wire that hangs from the motor head, it may also be under a light cover. The "Learn" button will be either green, red/orange, purple or yellow.

How to turn on LED light on remote control?

Press the remote control program button until the LED light turns on.

How many remotes does a Raynor garage door have?

Be sure you aren’t exceeding the number of controls you can use with your garage door opener. For Raynor openers, that number is 5 remote controls (or vehicles), or 4 remotes and a keyless entry pad. Another tip: While you have a ladder available, this is also an excellent time to change the light bulbs in your opener.

How to program Raynor remote?

Setting up a new remote control or resetting an existing one are done the same way: 1. Press the remote control program button until the LED light turns on. On the Raynor remote model G893RGX, that button is located under the visor clip. 2.

How to erase Raynor door code?

If you have purchased a home with an existing Raynor overhead door opener and would like to erase all previous codes, that can be done by pressing the “Learn” Button on the opener for 6 seconds until the learn indicator light goes out. All previous codes will be deleted from the opener.

Can you program a remote for a Raynor garage door opener?

If you’ve added or replaced a remote control for your Raynor garage door opener, or would simply like to re-program your remotes for security, this article will give you a quick summary of programming steps. It’s easy to do and requires only that you have a ladder or step stool handy so that you can reach the program Learn Button on your opener. Ask a friend or family member to help with that ladder work if you aren’t comfortable.

How to learn light on garage door opener?

If light bulbs are not installed on your garage door opener, then two clicks will be heard. Using the LEARN button: Press and release the LEARN button on the overhead opener unit. The learn indicator light will glow steadily for 30 seconds.

Do you measure the opening of a garage door?

If you’re considering a new garage door, it’s important to measure your door openingto determine any special requirements before you shop.

Do you need to paint a Raynor garage door?

All Raynor residential steel garage doors are already painted with a baked-on finish. No additional painting is required. However, if you want to apply another color, view our garage door painting instructions .

Find the Learn Button on the Garage Door Opener

The "Learn" button on your garage door opener is located above the antenna wire that hangs from the motorhead, it may also be under a light cover. The "Learn" button will be either green, red/orange, purple or yellow.

Location of Learn Button on Garage Door Opener

The pictures below show the location of the garage door opener's Learn button depending on the light cover configuration.

Programming Remote Controls and Clear Garage Door Opener Settings

The "Learn" button on a garage door opener has two functions. ( Note: Wi-Fi-enabled garage door openers have a third function of activating the Wi-Fi learn mode.)

How to Find the Learn Button on a LiftMaster Garage Door Opener

For a LiftMaster garage door opener, you will find the learn button on the back of the machine after following these steps:

Program Your Garage Door With the Learn Button

If your learn button is red, purple, green or orange, the reprogramming process will include pressing and releasing the button. Doing so will begin your overhead door opener’s reprogramming mode. The light above the button will then turn on for about 30 seconds.

What to Do If Your Learn Button Is Yellow

If the learn button is yellow, you will have a slightly different process for programming your opener and clearing its memory. To program your garage door opener, quickly press and release the learn button. After the light turns on, hold down your remote’s button for three seconds. The lights will then turn off to signal successful programming.

Shop Garage Door Openers at Quality Overhead Door

As you learn more about your LiftMaster garage door opener, you may realize it could use an update or is not operating as smoothly as you’d like. At Quality Overhead Doors, we have a wide selection of LiftMaster garage door openers so that you can find the perfect one to fit your needs.

Find the Learn Button on the Garage Door Opener

The "Learn" button on your garage door opener is located above the antenna wire that hangs from the motorhead, it may also be under a light cover. The "Learn" button will be either green, red/orange, purple or yellow.

Location of Learn Button on Garage Door Opener

The pictures below show the location of the garage door opener's Learn button depending on the light cover configuration.

Programming Remote Controls and Clear Garage Door Opener Settings

The "Learn" button on a garage door opener has two functions. ( Note: Wi-Fi-enabled garage door openers have a third function of activating the Wi-Fi learn mode.)

What is Raynor door?

Raynor is a US company that makes aluminum and steel doors. The products produced are durable if the technician installs them following the company’s instructions. However, if some issues arise from your door, you should know the cause and develop an easy solution. Below are some of the everyday problems that are likely to occur and their solutions.

How to test a door opener?

Press the key on the remote to test the opener. The light on the opener should flash, and the door should open.

Why won't my garage door open with the remote?

The motor’s antenna could be damaged or blocked from the signal. Ensure it’s hanging down from the engine. If the door opens with the wall controller, it’s a simple issue of dead batteries.

Why does my door remote fail?

The door remote opener may fail due to the following reasons; Remote batteries are dead – to confirm this, try using the wall-mounted control panel to open the door. If the door opens, the batteries are dead. Remote signal disrupted- the remote may be out of range, or the receiving antennae may be damaged.

What to do if your door springs are broken?

If the door has broken springs, don’t even try to open it as it is hazardous. Instead, call the technician for repair.

Why do garage doors reverse?

Garage doors will always reverse if they touch an obstacle. The door will close halfway and later reverse, a sign that something is hindering it from closing. Check the tracks for dirt, rocks, trash, or other debris. Give the tracks a wipe-down to remove anything on the way.

What to do if your door doesn't close?

If the door fails to close or open fix it down or adjust it up accordingly.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version17.43sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[05:03:58] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[05:03:58] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[05:03:58] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[05:03:58] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[05:03:58] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[05:03:58] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:03:58] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:03:58] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[05:03:58] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • Booting (21.84ms)
  • Application (17.41s)
  • 1 x Application (99.87%)
    17.41s
    1 x Booting (0.13%)
    21.84ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed17.38s
    • select * from `posts` where `published_at` <= '2025-06-13 05:03:58' and `slug` = 'where-is-the-learn-button-on-a-raynor-garage-door-opener' and `posts`.`deleted_at` is null limit 1
      7.26ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-13 05:03:58
      • 1. where-is-the-learn-button-on-a-raynor-garage-door-opener
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 153319 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      3.41msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 153319
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      640μs/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      490μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      400μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      17.36s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 34402 limit 1
      4.78msview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 34402
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        5jGvHD5dA39DG40Qx09vJeCCbMyUnZti7Ccag6Gt
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/where-is-the-learn-button-on-a-raynor-garage...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /where-is-the-learn-button-on-a-raynor-garage-door-opener
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:24 [ "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.217.7" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "cf-ray" => array:1 [ 0 => "94ed27fe2cb27a66-ORD" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.217.7, 172.69.58.11" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:55 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/where-is-the-learn-button-on-a-raynor-garage-door-opener" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/where-is-the-learn-button-on-a-raynor-garage-door-opener" "REMOTE_PORT" => "54548" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.69.58.11" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.217.7" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_CF_RAY" => "94ed27fe2cb27a66-ORD" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.217.7, 172.69.58.11" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1749771238.1989 "REQUEST_TIME" => 1749771238 ]
        request_cookies
        []
        
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Thu, 12 Jun 2025 23:33:58 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlNpalpZWkFiTjZIdEdxWllWVC8wYmc9PSIsInZhbHVlIjoiN0E0bzU1amRlWlNuWXg0b3NGRW5JT0lqOG5mYXVmaTRValZMbENWSWJNTDloMlI2QnZGRmxBV25CV1llcWVXTTNGRDd1Y0tIdDNaQ0pzMVJuelNXNC9NdUhscXl4REFnUVhsOEJFZ0JmaXEzd2hGY01mSEduS2J1UGdiS0JpZ2ciLCJtYWMiOiJkZjhlNmU5ZTU0YThjYjVkMGMyNDlhYzJjMDgyODVjODVjOGQ2NTY3OGY0YmQ2ZTkxYTUzMWFlZDlmYjNjMTMxIiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 01:34:15 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IlNpalpZWkFiTjZIdEdxWllWVC8wYmc9PSIsInZhbHVlIjoiN0E0bzU1amRlWlNuWXg0b3NGRW5JT0lqOG5mYXVmaTRValZMbENWSWJNTDloMlI2QnZGRmxBV25CV1llcWVXTTNGRDd1Y" 1 => "askhelpdesk_session=eyJpdiI6Ijk1QnBUR2VkcS9PSVlFWGlJVjIzbmc9PSIsInZhbHVlIjoiSUs0cEpHSW04RW1hMWFuVEFUSDVqOU9vL3NIU1o4bEhLbmVPUWhYWTdxYUg1aHo3ZEdDRjczL2todHgyQytGQTFtTVNqTll6dEgxc0JmazZ3TGFLTDEzSlZOVHE4VjRObms4ektlMHRoUU0wQURDN3BObUJQckZ5T2kxVGE5RHMiLCJtYWMiOiJmZDhiMjRlNjA3Mzk1MmJmMzgyMjBiNDVmNzEyMjNmZWI3YWY3OThhYjljZjRmYjA1ZTNlYTVlMGM4NGE1NTY2IiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 01:34:15 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6Ijk1QnBUR2VkcS9PSVlFWGlJVjIzbmc9PSIsInZhbHVlIjoiSUs0cEpHSW04RW1hMWFuVEFUSDVqOU9vL3NIU1o4bEhLbmVPUWhYWTdxYUg1aHo3ZEdDRjczL2todHgyQytG" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IlNpalpZWkFiTjZIdEdxWllWVC8wYmc9PSIsInZhbHVlIjoiN0E0bzU1amRlWlNuWXg0b3NGRW5JT0lqOG5mYXVmaTRValZMbENWSWJNTDloMlI2QnZGRmxBV25CV1llcWVXTTNGRDd1Y0tIdDNaQ0pzMVJuelNXNC9NdUhscXl4REFnUVhsOEJFZ0JmaXEzd2hGY01mSEduS2J1UGdiS0JpZ2ciLCJtYWMiOiJkZjhlNmU5ZTU0YThjYjVkMGMyNDlhYzJjMDgyODVjODVjOGQ2NTY3OGY0YmQ2ZTkxYTUzMWFlZDlmYjNjMTMxIiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 01:34:15 GMT; path=/XSRF-TOKEN=eyJpdiI6IlNpalpZWkFiTjZIdEdxWllWVC8wYmc9PSIsInZhbHVlIjoiN0E0bzU1amRlWlNuWXg0b3NGRW5JT0lqOG5mYXVmaTRValZMbENWSWJNTDloMlI2QnZGRmxBV25CV1llcWVXTTNGRDd1Y" 1 => "askhelpdesk_session=eyJpdiI6Ijk1QnBUR2VkcS9PSVlFWGlJVjIzbmc9PSIsInZhbHVlIjoiSUs0cEpHSW04RW1hMWFuVEFUSDVqOU9vL3NIU1o4bEhLbmVPUWhYWTdxYUg1aHo3ZEdDRjczL2todHgyQytGQTFtTVNqTll6dEgxc0JmazZ3TGFLTDEzSlZOVHE4VjRObms4ektlMHRoUU0wQURDN3BObUJQckZ5T2kxVGE5RHMiLCJtYWMiOiJmZDhiMjRlNjA3Mzk1MmJmMzgyMjBiNDVmNzEyMjNmZWI3YWY3OThhYjljZjRmYjA1ZTNlYTVlMGM4NGE1NTY2IiwidGFnIjoiIn0%3D; expires=Fri, 13-Jun-2025 01:34:15 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6Ijk1QnBUR2VkcS9PSVlFWGlJVjIzbmc9PSIsInZhbHVlIjoiSUs0cEpHSW04RW1hMWFuVEFUSDVqOU9vL3NIU1o4bEhLbmVPUWhYWTdxYUg1aHo3ZEdDRjczL2todHgyQytG" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "5jGvHD5dA39DG40Qx09vJeCCbMyUnZti7Ccag6Gt" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/where-is-the-learn-button-on-a-raynor-garage-door-opener" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]