"Where is the EGR Valve on my 1999 Toyota Camry?" The EGR Valve is located between the firewall and the top, side of your engine. Always check the rubber hoses here, since cracks and abrasions on these pressurized hoses can give EVAP system error codes easily.
Where can I get an EGR valve for my Toyota Camry?
AutoZone stocks the Toyota Camry EGR valve replacement you need to get your engine running like it should. For the right prices, expert advice and perks such as free engine diagnostic testing and free battery charging, visit your local AutoZone today. Had a check engine light.
Why replace your EGR valve at AutoZone?
Keep your engine running strong for the long haul by investing in a durable EGR valve replacement from AutoZone. The primary function of emissions control devices is to prevent large amounts of nitrogen oxide from getting released into the environment.
How much does it cost to replace an EGR valve?
A brand new EGR valve from Toyota will cost you around $60. However, you might be able to go to your local junkyard and find your replacement there for about $15 to $20. With the new valve installed, again, go through the process outlined above for resetting the check engine light, and then watch your engine's performance.
Where is EGR valve on Toyota Camry?
The EGR valve is located in the engine compartment (underneath the hood).
Where is the EGR valve located?
Answer: The purpose of the EGR valve is to recirculating engine exhaust gas to the back to the engine cylinders. To accomplish this task the EGR valve is attached to the intake manifold of the engine. This location is atop of the engine near the carburetor, usually towards the back of the engine near the firewall.
Does Toyota Camry have an EGR valve?
Follow these steps to replace the EGR valve in your Toyota Camry: Remove the negative battery cable from your battery terminal. Locate the EGR valve—it should be connected to your car's intake. You'll likely find a cluster of hoses in the area.
Where is the EGR valve on a 2000 Toyota Camry?
1:094:51How to Replace EGR Valve 97-01 Toyota Camry - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe EGR valve is located here on the backside of the intake manifold remove the vacuum line at theMoreThe EGR valve is located here on the backside of the intake manifold remove the vacuum line at the top of the EGR.
How do you clean a Toyota EGR valve?
0:453:26Cool Trick to Clean EGR Valve in Your Car (Low Flow Code P0401)YouTubeStart of suggested clipEnd of suggested clipSo get some carburetor cleaner and spray it. In hey you can see I got all the black crud coming outMoreSo get some carburetor cleaner and spray it. In hey you can see I got all the black crud coming out of this thing it's filthy.
What does an EGR valve look like?
1:318:42How To Test EGR Valves | Old vs New - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this EGR valve is in good shape you can also let it sit like this for maybe 30 seconds 45 secondsMoreSo this EGR valve is in good shape you can also let it sit like this for maybe 30 seconds 45 seconds just make sure that's not losing pressure if you see something like this.
How much is a EGR valve for a 99 Toyota Camry?
We currently carry 8 EGR Valve products to choose from for your 1999 Toyota Camry, and our inventory prices range from as little as $104.99 up to $197.99.
How do you remove a EGR valve?
1:2213:37How To Remove and Clean an EGR Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipItself just held in on to the intake manifold with four 10 millimeter bolts and then it's just aMoreItself just held in on to the intake manifold with four 10 millimeter bolts and then it's just a case of removing the egr cooler pipe.
How much does it cost to replace a EGR valve?
The average cost of replacing the EGR valve in your vehicle is anywhere from $250 to $350 on average, depending on your vehicle's year, make, and model as well as the type of system it has. The cost of parts will be somewhere around $190 to $270, while the cost of labor will be anywhere from $60 to $80.
Where is the EGR valve on a 1997 Toyota Camry?
The EGR valve is near the throttle body. If you follow the intake towards the engine, you'll soon spot the EGR.
How do you change an EGR valve?
1:163:10How to Replace Bad EGR Valve in Your Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight here we just have to take the two bolts off and hold it in place so you get a wrench. And putMoreRight here we just have to take the two bolts off and hold it in place so you get a wrench. And put it on the bolt. And take them both off then we unplug the vacuum line that comes out of the hole.
Where is the EGR valve located on a Toyota Corolla?
The EGR valve is located in the engine compartment (underneath the hood).
How much does it cost to replace an EGR valve?
However, you might be able to go to your local junkyard and find your replacement there for about $15 to $20.
What to do if check engine light comes back on?
If, after starting your engine, there is no difference in your engine's performance or if the "check engine" light comes back on and you get the same code, you will need to replace the valve.
Exhaust Gas Recirculation (EGR) Valve
Fits Camry, RAV4, Solara EGR Valve - Repair or Replace A failed EGR valve will often have no noticeable symptoms beyond a check engine light, but it does cause your 1999 Toyota Camry to operate inefficiently and produce higher emissions. Our technicians have access to manufacturer-approved repair processes and Toyota genuine parts.
MSRP
All prices are Manufacturer’s Suggested Retail Prices and do not include any applicable tax and/or installation charges. Dealer sets actual price.
Dorman EGR Valve 911-608
Your ultra-dependable Toyota Camry provides you with power and performance other auto manufacturers only aspire to. If the EGR valve for Toyota Camry is damaged, though, the combustion cycle doesn't work properly.
Reviews
Had a check engine light. Purchased a egr valve online and same code came on. Bought this product and code hasn’t came back on after a few months, passed emissions and no mil is back on
Step 1 – Locate The EGR Valve
Step 2 – Label Hoses
- Before taking off the valve, label the necessary hoses so you know how to reconnect them in a few minutes. A quick preventative measure in making sure things get hooked back up correctly. Thank us later.
Step 3 – Clean The Valve
- Once you remove the valve, take a screwdriver, a wire brush, or some other kind of scraper and clean out all the gunk as well as carbon inside the valve. Exhaust gasses will cake the inside of the valve, and with the heat of the gasses, it hardens into a very solid layer of crud.
Step 4 – Reinstall Your EGR Valve
- Reassemble the EGR valve and the various vacuum hoses surrounding it. You may need to reset the check engine light by undoing the negative (black) terminal on the battery for a few minutes. With everything installed, start the car and watch its behavior. If, after starting your engine, there is no difference in your engine's performance or if the "check engine" light comes back on and you …
Step 5 – Replace The EGR Valve
- If you need to replace the valve, take off the old valve and then install a new EGR valve. You just removed the original one five minutes ago, so this should be pretty easy by now. A brand new EGR valve from Toyota will cost you around $60. However, you might be able to go to your local junkyard and find your replacement there for about $15 to $20. With the new valve installed, agai…
Related Discussions