Full Answer
How to clean the drain pump on a Frigidaire affinity washing machine?
How to Clean the Drain Pump on a Frigidaire Affinity. 1 Step 1. Disconnect power to the Frigidaire Affinity washing machine. 2 Step 2. 3 Step 3. 4 Step 4. 5 Accessing and Cleaning the Drain Pump. More items
Why won’t my Affinity washer drain?
More often than not, the main reason that your Affinity washer will not drain is due to an obstruction, damage, or malfunction in the drain pump. There are times where some small objects or even articles of clothing can get caught up in the pump.
Do Frigidaire affinity washers break down over time?
But like any machine running on a variety of components, there is a chance that it could break down over time. With Frigidaire Affinity washers, which are front-loading, there is a chance that they may not drain.
How long do your Frigidair washer pumps last?
Replacement from Frigidair lasted 4 yrs and 9 months. Purchased Frigidair Affinity washer 2008. Replaced original pump 2015 after almost 7 years. Only two people in the house. This stock Frigidair unit lasted 4 yrs and 9 months. Not a fun job. Gets harder to do the older you get.
Where is the drain pump on a Frigidaire Affinity washer?
0:409:29Use a Phillips head screwdriver to loosen and remove the two screws. Then slide back the top panelMoreUse a Phillips head screwdriver to loosen and remove the two screws. Then slide back the top panel lift it up and then you can remove it.
How do you open the drain pump on a Frigidaire Affinity washer?
Find the drain pump near the bottom right of the washing machine and set towels underneath the pump.Disconnect the inlet sump, which looks like a white dial, from the pump and disconnect the outlet hose from the pump.More items...
How do you replace the drain pump on a Frigidaire Affinity washer?
0:553:18Out. Now use a 5/16 inch socket to remove the mounting screws securing the pump to the base. PullMoreOut. Now use a 5/16 inch socket to remove the mounting screws securing the pump to the base. Pull the pump away from the base and disconnect the wire harness.
Where is the filter on a Frigidaire Affinity washer?
0:4113:40All you have to do is pull it out till it stops. And then on the back left corner there's a littleMoreAll you have to do is pull it out till it stops. And then on the back left corner there's a little release tab you have to press down on. And you can't pull it off the rest of the way.
How do you clean the drain on a Frigidaire Affinity washer?
4:599:18Put a bag under that way when the water comes down I'm able to catch it on the BET. And inside theMorePut a bag under that way when the water comes down I'm able to catch it on the BET. And inside the bag opposed to getting all on the bottom of the washer.
Why won't my Frigidaire Affinity washer drain?
If the washer won't drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.
Why does my Frigidaire Affinity washer keeps pausing?
The PAU, or pause, error usually means that the washing machine cycle was interrupted and was not restarted properly. If you try to modify the cycle or start a new one before the first cycle is complete, the PAU error will appear on the display.
How do you test a washing machine drain pump?
Unscrew the screws with a Phillips screwdriver, and remove the panel by tilting it out while you lift it to unhook the top of the panel from the machine. You should see the drain pump attached to the bottom panel. It is connected to the drain hose.
How do you put a Frigidaire Affinity washer in diagnostic mode?
0:012:56Turn the selector knob to the far left cycle. And press and hold cancel. And the far center buttonMoreTurn the selector knob to the far left cycle. And press and hold cancel. And the far center button under the display simultaneously for 3 seconds to enter the diagnostic mode.
Is there a filter on a Frigidaire washer?
The Frigidaire Front Load Washer is an Energy Star certified washing machine with a stainless steel drum and washing capacity of 3.5 cubic feet. One problem that you may face if you own this washing machine is that the filter, located at the drain valve, may get clogged with debris or sediment.
How do I clean the filter on my Frigidaire top load washer?
0:051:33Simply wipe it with a non abrasive household cleaner and then use the rinse and spin only cycle. ToMoreSimply wipe it with a non abrasive household cleaner and then use the rinse and spin only cycle. To clean and fresh in the washer tub activate.
Where is the lint trap on a Frigidaire washer?
Inside the center agitator: If you have a top-loading washer, inspect the center agitator. The cover may be removable, revealing a lint trap inside. At the end of the drainage hose: A small mesh screen may be fitted onto the end of the hose that drains water out of the machine.