After the washer has started, look for the button that indicates “Control Lock”. It is usually located on the panel at the top of the washer. Once you have found the panel, look for the unlocking button, then proceed to the next step.
- Locate the "Control Lock/Unlock" button on your Duet's control panel. ...
- Press and hold the "Control Lock/Unlock" button for three seconds.
- Release the "Control Lock/Unlock" button when the control lock icon on the display disappears.
Where is the control lock on a whirlpool duet washer?
18/02/2020 · How to Unlock the Controls for a Whirlpool Duet Washer. Locate the " Control Lock /Unlock" button on your Duet's control panel. Press and hold the " Control Lock /Unlock" button for three seconds. Release the " Control Lock /Unlock" button when the control lock icon on the display disappears. Click to see full answer.
How do I unlock the controls on my Whirlpool washer?
04/11/2021 · Hold down the control lock button on your whirlpool washer for three seconds at the end of the washing cycle. If the switch is damaged or has failed electronically, it’s possible the whirlpool washer lid won’t unlock or signal a cycle to start. Source: readytodiy.com. Check the user control panel. Examine your washer’s tech sheet to determine which wires to cut.
What does it mean when a Whirlpool dishwasher says control locked?
07/05/2020 · How to Unlock the Controls for a Whirlpool Duet Washer. Locate the "Control Lock/Unlock" button on your Duet's control panel. Press and hold the "Control Lock/Unlock" button for three seconds. Release the "Control Lock/Unlock" button when the control lock icon on the display disappears. How do you bypass a washing machine door lock?
What does control lockout mean on a washing machine?
17/02/2022 · Before you can unlock your washer, you need to make sure it’s plugged in first. After the washer has started, look for the button that indicates “Control Lock”. It is usually located on the panel at the top of the washer. Once you have found the panel, look for the unlocking button, then proceed to the next step.
How do I turn off the Control Lock on my Whirlpool washer?
Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says "Control Lock Hold 3 Sec" under it for 3 seconds.15-Jun-2020
How do I unlock my Whirlpool washing machine?
Press the “Drain and Spin” button on the washer's control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock.
How do you unlock the Control Lock on a washing machine?
Washer - Front Load Washer Control LockPress and hold the LOCK button for 3 seconds.A sound is made to indicate the lock/unlock status. The control lock icon on the display will light up when the feature is on.
How do I reset the control panel on my Whirlpool washer?
Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset.
What does Control Lock mean on Whirlpool washer?
If you try to push buttons, you may see the code "LoC" or "LC" (depending on your model). This is a reminder that you have set the control lock, and need to de-activate it to allow the washer controls to function.12-Jun-2020
Why is my Whirlpool washer locked?
The most common cause of a Whirlpool washer door being locked and not being able to open is a faulty lid switch (including the striker). The door switch locks and unlocks your door depending on which stage your wash cycle is at. When it becomes defective, your washer door may not unlock when it's supposed to.07-Jun-2021
How do I turn off the control lock on my Whirlpool dryer?
The Easy FixLocate the “End of Cycle Signal” button. This is located on the right side of the Duet model dryer.Push the button and hold it down for 3 seconds.The Control Lock LED should turn off letting you know that your dryer is no longer locked.
How do I turn off the control lock on my Whirlpool oven?
To turn the control lock setting off, press and hold the START button for 3 seconds. If this doesn't work, turn the oven off at the circuit breaker for 1 minute. When the circuit breaker is turned back on, the error code should be gone.01-Dec-2020
Do Whirlpool washers have a reset button?
While most Whirlpool washers can be reset by disconnecting the power, some models may have different instructions. You may be able to find the specific reset instructions for your model either in the manual or by locating the washer's tech sheet, which is usually located under the control panel.01-Nov-2021
How do I reset the lid lock on a Whirlpool Cabrio washer?
Try unplugging the washer to allow the control panel to reset....Lid Lock IssuesPress/hold for 3 seconds.Release for 3 seconds.Press/hold for 3 seconds.Release for 3 seconds.Press/hold for 3 seconds.Release.12-Dec-2019
How do you reset the code on a Whirlpool front load washer?
To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.15-Jun-2020