The insulator is a press-fit on the stud, and is designed to keep the tank in place and from contacting the serpentine belt. Remove the power steering cap and use a long, thin funnel to install the fluid, after thorough cleaning the cap and top of the pump reservoir of any dirt and debris (so it doesn't fall in the p/s fluid).
Full Answer
Where does power steering fluid go in Chevy Impala 2003?
0:141:30How to Check Power Steering Fluid Level 00-05 Chevy Impala - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we can remove the cap turn it to the left pull it out there's a dipstick on the cap we'll wipe itMoreSo we can remove the cap turn it to the left pull it out there's a dipstick on the cap we'll wipe it off with a rag reinsert the cap let it sit for a second. And pull the cap out again.
Where does power steering fluid go in Impala?
1:332:372004 Chevy Impala: Power Steering Reservoir Location - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt and here it goes there goes your power steering reservoir right here this one is empty. So if youMoreIt and here it goes there goes your power steering reservoir right here this one is empty. So if you're looking for your power steering reservoir is because some genius person decided to hide.
Where do I pour my power steering fluid?
0:101:12How to Check and Add Power Steering Fluid EASY! - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo here is a power steering fluid reservoir. With the level low where the arrow is pointing is whereMoreSo here is a power steering fluid reservoir. With the level low where the arrow is pointing is where you want the level to be so we need to remove the cap on top of the power steering fluid reservoir.
Where do you put the power steering fluid in an 04 Chevy Impala?
1:415:572004 Chevy Impala Adding Power Steering Fluid - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what you have to do is just go right in the middle use the middle.MoreAnd what you have to do is just go right in the middle use the middle.
How do you put power steering fluid in a 2002 Chevy Impala?
Follow These Steps to Add Power Steering Fluid to a Chevrolet Impala (2000-2005) Base 3.8L V6Find Reservoir - Locate the power steering fluid reservoir.Check Level - Determine the power steering fluid level.Add Fluid - Determine power steering fluid type and add fluid.More items...
Where do I put the power steering fluid in my 2001 Chevy Impala?
It should be right next to the alternator, Power Steering or use only power steering fluid or something to that respect will be on the cap.
What are the symptoms of low power steering fluid?
Symptoms of Low Power Steering Fluid:Noisy steering. ... Jerky or jumpy power steering. ... Hard to turn the steering wheel. ... Screeching steering. ... Puddle or stains under the vehicle.
Can you just add power steering fluid?
If the dipstick or reservoir level is between “MIN” and “MAX,” you don't need to add fluid. If the fluid is below the “MIN” line, remove the cap (or leave the dipstick out) and add power steering fluid in small amounts, checking the level after each time. Don't fill it above the “MAX” line.
Do you add power steering fluid with car running?
Warm Up Your Power Steering Fluid In order to get an accurate read on the power steering level, you need to ensure that the fluid is warmed up. The best way to do this is by starting up your car, keeping it in idle and turning the steering wheel from stop to stop two to three times. Turn the engine off.
What kind of power steering fluid does a Chevy Impala take?
Prestone - American Vehicle Power Steering Fluid - 12 fl. Oz. - Synthetic, 2X Anti-Wear, 100k Mile (Part No. AS264Y)