What was the first fuel-injected motorcycle?
Kawasaki KZ1000G was the first fuel-injected motorcycle, and it was available in 1980.
Why do motorcycles have fuel injections?
Fuel-injection, rather than carburetion, on an engine would be one way to get a motorcycle through emission testing. So it was a 1980’s Kawasaki heavy weight cruiser that was the start of what we have all come to accept as entirely normal on today’s motorcycles – fuel-injected engines.
When did motorcycles start using carbs for fuel?
The first fuel-injection system on a streetbike debuted in 1980, but for the most part, carbs were how motorcycles mixed air and fuel right up to the turn of the century. (It got hard to ignore fuel injection around that time, anywho.) Now, I work with folks who, by and large,...
What year did Kawasaki start putting fuel in motorcycles?
In 1980, Kawasaki was the first motorcycle manufacturer to recognize that in the following years, bikes would have to meet even tougher compliance laws. Fuel-injection, rather than carburetion, on an engine would be one way to get a motorcycle through emission testing.
When did bikes stop being carbureted?
The 2000 was the last year of carburetors on that bike.
When did they switch from carburetor to fuel injection?
1990sIn passenger car petrol engines, fuel injection was introduced in the early 1950s and gradually gained prevalence until it had largely replaced carburettors by the early 1990s.
Are motorcycles still carbureted?
Despite new motorcycles being almost exclusively fuel injected, countless carbureted motorcycles (as well as dirt bikes, ATVs and more) are still in use today. For many riders and new motorcycle technicians, carburetors are a mystery—however, once we take a deeper look, we learn that they are incredibly simple devices.
When did Harley-Davidson switch to fuel injection?
With all the changes in 1999-2000, things were quite at Harley-Davidson for a few years, though in 2001 they switched to a better, Delphi EFI system on the bikes that were injected. 2001 was also the first year the Softail line was available with a fuel injected motor.
What was the last carbureted vehicle?
In the U.S. market, the last cars using carburetors were: 1990 (General public) : Oldsmobile Custom Cruiser, Buick Estate Wagon, Cadillac Brougham, Honda Prelude (Base Model), Subaru Justy. 1991 (Police) : Ford Crown Victoria Police Interceptor with the 5.8 L (351 cu in) V8 engine.
Is fuel injection better than carburetor motorcycle?
Old bikers would also stick to their carbureted option, as they are simpler to maintain and repair. However, while fuel injection generally increases the cost of the bike, it also provides much better cold starting, better throttle response, better fuel efficiency, less maintenance.
When did Yamaha dirt bikes go fuel Injected?
Fuel injection first appeared on a production dirt bike way back in 2002, and a greater majority of late-model four-stroke motocross and enduro/trail bikes now uses the technology.
When did Honda motorcycles go to fuel injection?
1982The CX500 Turbo (a 500cc export model) was the first Honda motorcycle to be sold with fuel injection, in 1982. Since then, fuel injection has been available on a wide range of motorcycles, from large-displacement 1800cc bikes down to small-displacement 125cc models.
What year did Kawasaki Vulcan get fuel injection?
Kawasaki did more than fuel-inject its flagship V-twin in 2000. It substantial changed the engine and revised the chassis and styling as well. Better breathing, more exact fuel metering, and more compression have helped boost power on the FI.
When did Harley stop making carbureted motorcycles?
The Last Years of the Harley-Davidson Carburetor For the 2008 model year, that series also lost carburetors in favor of Harley-Davidson's electronic sequential port fuel-injection system. The era of the carburetor had ended.
Why did they stop using carburetors?
Thanks to emissions regulations, automakers began to give up their carburetor addiction in the 1980s, and there are now two entire generations of motorists who think that “pump twice and crank” is something they wouldn't want their mothers to catch them doing.
Is 2006 Street Glide fuel injected?
Enter the '07 Twin Cam 96, which delivered more than just another 8 cubic inches and standard electronic fuel injection. There are about 10 more lb. -ft. of torque arriving at the rear wheel between 2500 and 3500 rpm....VALUE.2006$14,6752009$18,7802 more rows•Oct 13, 2010
What was the fastest motorcycle in 1980?
Its fastest bike in 1980, the KZ1000 MkII, was equipped with carburetors and cost $750 less than the newly fuel-injected cruiser Z1000. The truth of the matter lay with the Environmental Protection Agency here in the U.S., which was starting to tighten emission regulations on all road vehicles. In 1980, Kawasaki was the first motorcycle ...
How much did the 1980 Kawasaki Z1000 cost?
For the 1980 model year the Z1000 Classic was equipped with an electronic fuel-injection system (pictured above) pushing its retail price up to $4199, which was $500 more than the standard carbureted Z1000 LTD version.
How does the Z1000 work?
How that early system on the Z1000 worked was to monitor via a series of sensors, ambient air temperature, engine temperature at the cylinder head, airflow into the airbox, engine revs, throttle position and intake manifold vacuum. At the Z1000’s introduction by all accounts it did its job well with Cycle World’s 1980 review of the Classic stating:
What is fuel injection on a motorcycle?
Fuel-injection, rather than carburetion, on an engine would be one way to get a motorcycle through emission testing. So it was a 1980’s Kawasaki heavy weight cruiser that was the start of what we have all come to accept as entirely normal on today’s motorcycles – fuel-injected engines.
Who makes the Bosch jetronic system?
It was manufactured for Kawasaki by Japan Precision Electronics, which had the rights to produce the Bosch Jetronic system specifically for motorcycles. In actual fact it was identical in concept and design to Bosch fuel-injection that was being used on Datsun (Nissan) cars at the time.
Why do carburetors fade away?
To start with, carbs pollute. Not the way most people think, though. Carburetors may put out a little more pollution through the tailpipe than fuel injection, but the bigger difference is when the bike isn't running. Carburetors have a bowl in which fuel sits, and that fuel evaporates.
Why did carbs rule the motorcycle?
When motorcycles debuted, carburetors were the only way to mix fuel and air in the right proportions for an engine to digest them . For eight decades, they didn’t seem to be broken, so nobody put much effort into fixing them!
What can coat catalysts?
And the catalysts inside them are kind of picky. They can be easily rendered useless by chemicals that coat their surfaces. One of the items that can coat them is soot from unburned fuel particles, which often occur inside an engine running "fat" — towards the 12:1 end of the air/fuel spectrum.
When did motorcycles start using fuel injection?
The first fuel-injection system on a streetbike debuted in 1980, but for the most part, carbs were how motorcycles mixed air and fuel right up to the turn of the century. (It got hard to ignore fuel injection around that time, anywho.) Now, I work with folks who, by and large, ride fuel-injected motorcycles.
Do carbs work on motorcycles?
Carbs also worked well with the crappy electrical systems most motorcycles had. Manufacturers didn't have to work very hard to power a few lights and the ignition, but fuel injection requires pressurized fuel. The easiest way to do that is with a fuel pump, which is typically electrically operated.
Do carburetors have a bowl?
Carburetors have a bowl in which fuel sits, and that fuel evaporates. Mama Nature, it turns out, does not have the same penchant for those pesky unburned hydrocarbons that I do. Fuel-injection systems are essentially sealed, so they're not allowing unburned fuel to escape when the motorcycle is parked.
Does fuel injection give more power?
That’s the long and short of things. Fuel injection doesn’t give appreciably more power, and it doesn’t provide much better gas mileage. Fuel injection does allow for more accurate control of the air/fuel ratio, and in doing so, allows a bike to run cleaner and keep a catalytic converter on board.
When did dirt bikes start fuel injection?
Fuel injection first appeared on a production dirt bike way back in 2002, and a greater majority of late-model four-stroke motocross and enduro/trail bikes now uses the technology.
Are all-new dirt bikes fuel injected?
These advantages coupled with several others have made fuel injection technology a better alternative to the classic carburetor engine. Consequently, most new dirt bikes models being released to the market have abandoned the carburetor present in older models in favor of fuel injection.
Which is faster 250 2 stroke or 450 4 stroke?
The 250 exhausts you quicker both physically and mentally, but if you can swing it, a ride on the 250 2-stroke prior to a showdown on the 450f can actually make you a better rider and more competitive on the track.
What does KTM stand for?
KTM stands for Kraftfahrzeuge Trunkenpolz Mattighofen. KTM is an Austrian motorcycle company founded by Hans Trunkenpolz in 1934 in Mattighofen, Austria. In the beginning, it was a metal working shop. The English Translation for Kraftfahrzeuge is motor vehicles.
What does YZ stand for in Yamaha?
YZ- Yamaha Zinger (another word for 2 stroke) at least thats what i’ve thought it was. SX- Supercross. EXC- Enduro Cross Country.
What is the best dirt bike brand?
Here’s a list of the 10 best, and most reliable, dirt bike brands: Yamaha. And the best dirt bike manufacturer, with the best reputation, goes to Yamaha. Suzuki. Like Honda, Suzuki is a large scale Japanese auto manufacturer. Beta. Honda. Kawasaki. KTM. Maico. Hyosung.
What is the best bike for a 13 year old?
21 Best Bikes for Teens sixthreezero Around The Block Men’s 7-Speed Beach Cruiser Bicycle. Schwinn High Timber Youth and Adult Mountain Bike. Dynacraft Magna Throttle Boys BMX Street/Dirt Bike. Huffy Hardtail Mountain Bike. Firmstrong Urban Man Beach Cruiser Bike. Kent KZ2600 Dual-Suspension Mountain Bike.
What year did Yamaha dirt bikes become fuel injected?
At the start of the 2011 Grand Prix motocross season Team Yamaha unveiled a prototype fuel-injected YZ250F for Gautier Paulin to race. This is not a production bike, and although it is based on prototype bikes being tested by the Yamaha R&D department.
Are all new dirt bikes fuel injected?
These advantages coupled with several others have made fuel injection technology a better alternative to the classic carburetor engine. Consequently, most new dirt bikes models being released to the market have abandoned the carburetor present in older models in favor of fuel injection.
What does KTM stand for?
KTM stands for Kraftfahrzeuge Trunkenpolz Mattighofen. KTM is an Austrian motorcycle company founded by Hans Trunkenpolz in 1934 in Mattighofen, Austria. In the beginning, it was a metal working shop. The English Translation for Kraftfahrzeuge is motor vehicles.
What does the F stand for in 250f?
In Honda talk, the “F” stands for “family,” and that generally means that the bike is aimed at entry-level riders. Don’t confuse that with Yamaha’s line, where the motocross four-stroke race bikes all end in “F.” That’s a YamaF—very different.
Which is faster a 2-stroke or a 4 stroke?
A stroke is a motion of a piston, meaning a two-stroke dirt bike has 2 different motions of the piston, while a four-stroke has 4. 2 Strokes are generally more unstable and accelerate faster, while a 4 stroke is more consistent and has a higher top speed.
What does YZ stand for in Yamaha?
YZ- Yamaha Zinger (another word for 2 stroke) at least thats what i’ve thought it was. SX- Supercross. EXC- Enduro Cross Country.
When did YZ250F go Fuel Injected?
Significant advances 2003 Automatic decompression exhaust cam 2006 Aluminium frame 2008 New engine 2010 New engine layout, with lower center of gravity 2014 Rear slant cylinder, 4-Valve head, Fuel Injection
What year did the KZ1000G have EFI?
The 1980 KZ1000G had EFI. Electronic Fuel Injection. It was the first! Followed by the GPz series 1100. Unless someone can show me an earlier mechanical fuel injected motorcycle... If there was one, I'd really like to know about it. Mechanical, (and electronic) fuel injection has been around for several decades before 1980, (Bosch, Rochester, ...
When was the CX500 turbo made?
In 1982 Honda made the CX500 Turbo that was fuel injected, turbocharged, water cooled....it was really ahead of it's time. Unfortunately it also cost something like $5000.I almost bought one several years later, still new on the showroom floor, for $2600.
Do bike throttle bodies flow better than automobiles?
Bike throttle bodies (and carbs) are HUGE and flow an incredible amount compared to automobiles. Recent refinements in design with secondary throttle butterflies etc., have improved these systems to a great extent. Properly tuned and maintained carbs seem to handle these demands better in many cases.
