- Utility knife. The utility knife will often live up to its name and you’ll find it useful in many situations. ...
- Adjustable pliers. There are a few tools that you’ll rely on time and again when you’re working as an apprentice plumber.
- Adjustable spanner. Like many of the tools on this list, you’ll want to have an adjustable spanner for a few reasons. ...
- Torpedo level. You’ll want things to be straight and for that you’ll need a level. ...
- Tape measure. Integral for just about every job in the construction industry, you’ll find a tape measure in every tool box.
- Pipe cutters. Tube cutters are another essential plumbing tool and you can cover just about any situation with two basic models.
- Markers. I’d recommend getting two different markers for different situations: a permanent marker and a stick of chalk.
- Multibit screwdriver. You don’t want to be carrying loads of different screwdrivers around with you, so I suggest picking up a multibit magnetic screwdriver.
- Hammer. A hammer is a great all-round tool that will come in handy for all sorts of things, from punching in anchors to chipping off bits of loose concrete.
- Pipe wrenches. The final essential piece of kit you will need is a pipe wrench. ...
- Apprentice plumber tools. As an apprentice, you’ll slowly build up your collection of tools over time, but this guide outlines all the essentials that you just can’t do without.
What equipment do you need to be an apprentice plumber?
As an apprentice plumber, you need your own gear and equipment. Don’t worry about getting highly specialized tools at this point, but do assemble a basic kit with high-quality tools that feel comfortable in your hands. A good plumber is a prepared plumber.
What tools do you need to start a plumbing business?
1. Pipe wrench 2. Basin wrench 3. Adjustable wrench 4. Faucet key 5. Hacksaw 6. Tube and plastic pipe cutters 7. Plumber’s torch 8. Thread sealing tape 9. Pliers 10. Press fitting systems 11. Plungers 12. Hand Auger 13. Snake Machine 14. Goggles 15. Gloves 16. Heat shields/pads 17. PEX pipe expander & fittings 18. Crimpers 19. Stubby screwdriver
What kind of wrenches do Plumbers use?
These wrenches come in a variety of sizes, but plumbers most often have the 6- and 10-inch versions on hand for the next job. 5. Faucet Key Not a traditional wrench per se, but a critical part of any plumbing tools list. Faucet keys are small, X-shaped tools designed to open and close spigots and sillcocks.
What are the best tools for pipe work?
Best Plumbing Tools For Pipe Work. 1 Tubing Cutter. 2 Hacksaw. 3 Hole saw kit. 4 Pipe and tube benders. 5 Mole grips. 6 Plumber’s torch. 7 Thread sealing tape. 8 Pliers. 9 Press fitting systems. 10 Flashlight.
What tools does a starting plumber need?
Best Plumbing Tools For Pipe WorkTubing Cutter.Hacksaw.Hole saw kit.Pipe and tube benders.Mole grips.Plumber's torch.Thread sealing tape.Pliers.More items...
What tools does a plumber have?
The Plumbing Tools ListPipe wrench.Basin wrench.Adjustable wrench.Faucet key. Pipe Work.Hacksaw.Tube and plastic pipe cutters.Plumber's torch.Thread sealing tape.More items...•
What is the most common tool used by plumbers?
Among the typical tools of plumbers, a pipe wrench is known as the most important tool that is used for basic plumbing purposes. You can say that pipe wrench loosens and tightens pipes, additionally, helps to fit the pipelines.
How do I prepare for a plumbing apprenticeship interview?
Interview Questions for Apprentice Plumbers:Can you give me an example of a time when you helped the plumber by thinking out of the box? ... Describe a time when you successfully learned how to use a new piece of equipment on the job. ... How do you balance following instructions with independent thinking?More items...
What are the 4 types of plumbing?
5 Types of Plumbing Pipes You'll Find in HomesTYPE OF PIPES: PEX. Commonly Used For: Water supply lines. ... TYPE OF PIPES: PVC. Commonly Used For: Drain, waste, and vent pipes. ... TYPE OF PIPES: ABS. Commonly Used For: Drain, waste, and vent pipes. ... TYPE OF PIPES: Copper. ... TYPE OF PIPES: Galvanized.
What is the basics of plumbing?
The Three Parts of Your Plumbing System While there are many individual components in your plumbing system, it's useful to break it down into three primary systems: your water supply, water heating, and drainage.
What are the 10 plumbing tools?
Top 10 Plumber Tools You Should Have in Your HomePipe Wrench. Perhaps one of the most vital tools for any plumber's collection is the faithful pipe wrench. ... Adjustable Wrench. ... Basin Wrench. ... Tongue-and-Groove Pliers. ... Plunger. ... Hacksaw. ... Metal File. ... Plumber's Snake.More items...•
What is plumbers wrench called?
Pipe wrenchesPipe wrenches, sometimes referred to as monkey wrenches, are used by plumbers, drillers and many other trades that work with threaded piping.
What kind of wrench does a plumber use?
A plumber wrench (or plumber's wrench, pipe wrench, Swedish wrench or Swedish pattern wrench) is a form of plier described as a pipe wrench that uses compound leverage to grip and rotate plumbing pipes. Similar to the action of a Vise Grip plier, its jaw opening is adjusted to width by rotating a threaded ring.
How do I pass an apprenticeship interview?
If you follow these top tips, you'll be in a good position to land a Degree Apprenticeship.Do your research. The interviewer is bound to ask you what you know about the company and what you understand about the role. ... Know yourself. ... Look your best. ... Act professional. ... Breathe. ... Be positive. ... Ask questions. ... Plan for the day.More items...
What would make you a good apprentice answer?
SUGGESTED ANSWER: “I am someone who is hard-working, conscientious and professional. I fully understand that you want to take someone on within this apprenticeship who will not only work hard to do the job properly, but who will also continually grow and develop as the apprenticeship progresses.
What should I bring to an apprenticeship interview?
You might want to bring copies of your CV, covering letter, a copy of the apprenticeship job description and a notebook and pen. If the employer has asked you to bring something, make sure you've got it!
1. Tape measure
A good sturdy measuring tape is the most important tool in plumbing. Anything you do as a plumber needs to be measured.
2. Torpedo level
Now that you have your pipe measured and it’s cut to length it needs to be installed. Ever hear the term, “$#*! rolls down hill” that’s no accident. Imagine if it didn’t then it would clog up the pipes because there is no gravity helping push the waste down.
3. Channel lock pliers
Channel lock pliers are a great tool. They can be used as a ratchet, wrench, lever, and in indestructible metal hand. I use channel locks more than my speed wrenches and ratchet. Every tool has it place, but some tools can be used interchangeably. Queue the channel lock pliers.
4. Ratchet and deep socket set
As a plumber, installing copper, cast iron, and pvc pipes is common. Install all these pipes on trapeze hangers, clevis hangers or using T-locks, they all require to be clamped down for support. Every clamp has a nut that needs to be fastened down. If the run of the pipe is 100ft that is a lot of nuts to fastened.
5. Wrench set – open head or speed
These tools are like the ratchet and deep socket set, however they are smaller, compact, and can easily access tighter spaces. A cap screw that turns when tightening a nut can make a job go nowhere. Use the deep socket on one end and use the wrench on the other end. BOOM! No more rotating cap screw. The job is well on it’s way to being completed.
6. Quick Square
The quick square is a wonderful tool and should be in every plumbers tool box or bag. There are several uses for this simple tool. Most people only know the quick square for the 90° and 45° angles and straight edges. I’ve used a quick square to find the angle of a 45° elbow and layout the pipe route on the floor.
7. Writing utensil
If cavemen could write we would be able to read about their history. However they weren’t able to find a pencil to record their own history thus we speculate about them. Same principle with being an apprentice. A journeyman or foreman will give you orders, sometimes it’s long.
What tools do plumbers use?
Adjustable pliers. There are a few tools that you’ll rely on time and again when you’re working as an apprentice plumber. One of them is a pair of adjustable pliers. They’re a staple of any plumber’s kit, helping you with many things such as screwing nuts and tightening small pipes. As they’ll be used fairly frequently, ...
What do you learn in a plumber apprenticeship?
Starting off, you’ll initially learn about the health and safety aspects of plumbing.
What is a good tool to use to chip off concrete?
A hammer is a great all-round tool that will come in handy for all sorts of things, from punching in anchors to chipping off bits of loose concrete. I’d recommend getting an 8oz hammer with flat claws as it’ll be versatile for a lot of different scenarios.
What do you learn in plumbing?
Starting off, you’ll initially learn about the health and safety aspects of plumbing. What’s more, you’ll do a lot of fetching, carrying, tidying, and everything else that needs to be done. After soaking up as much knowledge as you can, you’ll soon be doing actual plumbing work, and for that you’ll need tools.
How long does it take to become a plumber apprentice?
Are you looking to become an apprentice plumber? It will take years of training and hard work to become a properly qualified plumber and, to get there, you’ll need a range of tools.
Do you need a torpedo level for a drain?
Whether you’re installing a vertical water line or putting in a drain on a slope, a torpedo level will come in handy to any apprentice plumber. These small spirit levels are great for tight spaces and you won’t have to spend very much.
What are the challenges of being a plumber?
When servicing homeowners, plumbers are constantly faced with a number of challenges, such as navigating small spaces, avoiding health hazards, and a variety of other challenges. Whether you are a residential plumber or a commercial plumber, these challenges require the right tools and a specific skill set.
What is a pipe wrench?
Pipe wrench. Plumbers use pipe wrenches to tighten and loosen nuts and fittings on pipes. Two of these are often used together, one for holding a pipe in place and the other for rotating a nut or fitting. Adjustable Wrench.
What tools do plumbers use to cut through hardware?
Hacksaw. You likely associate saws with carpenters, but plumbers carry a hacksaw to cut through a variety of hardware, including pipes, nuts, bolts, and screws. This is tough work and plumbers need to tightly secure their blades (and keep spare blades back in the truck). 7. Tube and Plastic Pipe Cutters.
What do plumbers use to repair?
If you work as a plumber, pipes appear prominently on your plumbing tools list. Modern plumbers use a variety of tools and techniques to repair, alter, replace, and install piping in various (and usually tight) spaces around the home.
What is a plumber's torch?
You need heat to solder. Plumber's torches are small, handheld tools that allow plumbers to apply intense heat in precise areas, soldering and sealing new piping for installs and replacements. They’re a must-have for any plumbing tools list.
What tool do plumbers use to work on faucets?
Pipe wrenches come in various lengths, and prepared plumbers typically work with an entire set of these tools. 2. Basin Wrench. The basin wrench is a T-shaped tool plumbers use specifically to work on faucets.
What is the largest wrench used by a plumber?
1. Pipe Wren ch. The pipe wrench serves as a plumber’s largest wrench. Plumbers use these heavy tools to tighten and loosen nuts and fittings on pipework. They typically use two of these wrenches together—one to hold a pipe in place and the other to rotate the nut or fitting in the appropriate direction.
What is an adjustable wrench?
The adjustable wrench tightens and loosens hexagonal nuts and fittings on pipes. These wrenches come in a variety of sizes, but plumbers most often have the 6- and 10-inch versions on hand for the next job.
What do trade professionals use to work out estimates?
Fewer trade professionals rely on a clipboard and pen-and-paper to work out estimates and scribble out invoices. Instead, they're armed with a vibrant digital tablet to help them better sell their products and services to homeowners, streamline paperwork, reduce mistakes, and capture payments on the spot!
How long does a plumbing apprenticeship last?
Plumbing apprenticeships last for several years based on the experience required for an individual state’s license exam. Becoming a licensed plumber is the light at the end of the tunnel, and it’s just one exam away.
What is the master plumber exam?
This grants you the ability to give back to the plumbing industry by owning a company and supervising other plumbers. You’ll probably have your own apprentice too, and the cycle of education will continue.
Is plumbing a good career?
Entering the plumbing industry remains a lucrative career option for a very good reason. Every home, office, store, restaurant, theater, and what-have-you requires a plumber for the necessities of modern life: running water and a flushing toilet.
Do you need insurance for plumbing apprenticeship?
Your apprenticeship takes care of the education or experience requirements, but some states also require proof of liability insurance . You’ll likely need to submit an application to the state’s Plumbing Division before you’ll be allowed to sign up for the journeyman’s exam, which often has a processing fee.
Is plumbing competitive?
However, plumbing apprenticeships can be quite competitive. With more people interested in apprenticeships than actual apprenticeship positions, you can stand out from the crowd if you have already attended some plumbing courses or have a letter of recommendation.
