Receiving Helpdesk

what temperature should my sub zero refrigerator be set at

by Prof. Ofelia Weimann Jr. Published 3 years ago Updated 2 years ago

38 degrees Fahrenheit

What temperature should a Sub Zero Freezer be set at?

The best temperature for your Sub-Zero refrigerator is 38 degrees Fahrenheit and the freezer should be set to 0 degrees. However, fluctuations between -/+ 5 degrees are normal. However, fluctuations between -/+ 5 degrees are normal.

What is the best temperature for a refrigerator?

To set your refrigerator temperature:

  • Read the owner’s manual and locate the refrigerator’s temperature controls.
  • Set the refrigerator to 40 degrees Fahrenheit or lower.
  • Place a reliable thermometer on the middle shelf of the refrigerator.
  • After a few hours, check the thermometer's reading to verify that your refrigerator's temperature control is accurate. ...

More items...

What is the minimum temperature for a refrigerator?

We do not recommend installing a refrigerator where temperatures will go below 60°F, unless stated otherwise in the Owner's Manual or Installation Instructions. At this temperature, the unit is less efficient and will continue to lose efficiency as the outdoor temperature decreases. At 32°F, there is no cooling capability at all.

Why is my freezer not cooling?

Why is my freezer cold but not my fridge? The most common cause for this condition is a problem with the defrost system . If the refrigerator freezer is cold but the refrigerator is warm, the evaporator fan motor might have failed.

What temperature should a Sub-Zero freezer be set at?

The higher the number, the colder the temperature. For a dial control, set the dial between 4 – 6 for normal temperatures. 1 is warmest, and 10 is coldest. A recommended setting between 4 and 6 will produce temperatures near 38°F in the refrigerator and 0°F in the freezer.

Should a Sub-Zero refrigerator run all the time?

If the refrigerator runs constantly, the main control board might be defective. A few times a day the control board is supposed to turn off the cooling system and turn on the defrost heater to melt away any frost that may have accumulated on the freezer evaporator coils.

What is the desired temperature a fridge should operate at?

40°FThe ideal fridge temperature is between 37°F (3°C) and 40°F (5°C). Your freezer temperature should be at 0°F (-18°C).

How do I make my Sub-Zero fridge colder?

Temperature Adjustment The higher the number on the knob, the colder the temperature. Sub-Zero recommends setting the dial between 4 and 6 for the best temperature. This setting produces temperatures near 38°F in the refrigerator and 0°F in the freezer.

How often should you clean refrigerator coils?

every six months to a yearTo keep your refrigerator and freezer humming, you should clean coils every six months to a year, more often if you have shedding pets. It's a short and easy task, and definitely one you shouldn't avoid.

Do Sub-Zero refrigerators have 2 compressors?

Most built-in refrigerator manufacturers offer dual condensers and evaporators, but not dual compressors. Only Sub-Zero units come with two compressors. This greatly increases the longevity of Sub-Zero refrigerators. Remember that compressors work all the time.

What number should you have a fridge on?

Check the temperature setting on your refrigerator. It should be set between 37°F and 40°F—the ideal refrigerator temperature to keep food fresh and cold but not frozen. If you have a numbered dial setting instead of a temperature reading, the highest number is the coldest (usually 5).

Is 42 degrees OK for refrigerator?

The temperature inside your refrigerator needs to be cold enough to inhibit bacterial growth, and warm enough so the food doesn't freeze. Refrigerators should be set to 40 degrees F (4 degrees C) or colder. A good temperature range for a refrigerator is between 34-38 degrees F (1-3 degrees C).

Why is everything freezing in my fridge?

Temperature settings The optimum temperature range for storing fresh food is between 36 - 38 degrees Fahrenheit or below 40 degrees. If your food is freezing, then it is possible that your fridge's temperature setting was accidentally set too low.

What is Sub-Zero temperature meaning?

Definition of subzero 1 : registering less than zero on some scale (especially the Fahrenheit scale) subzero temperatures.

Is 45 degrees a safe temperature for a refrigerator?

The USDA says refrigeration temperature should be 40°F (4.4°C) or below. If food is in there at a higher temperature (such as the 43-45°F the question mentions), for longer than 2 hours, and they're saying the food isn't safe.

What temperature should a refrigerator be?

In general, the ideal temperature setting for a refrigerator is between 35-38 degrees Fahrenheit and 0 degrees for the freezer.

How to use a thermometer in the refrigerator?

2 glasses or cups tall enough to fit your thermometers. Start by completely submerging a thermometer in a glass of water and placing it in the middle of the refrigerator. Do the same for the freezer, but instead of water, use a glass of oil. Let the thermometers sit in the refrigerator and freezer for 12 hours.

What happens if you open a door on a refrigerator?

An open door will allow cold air to escape and will create a temporary drop in temperature. Even the external room temperature causes small fluctuations in temperature in your refrigerator and freezer. However, if you notice temperature changes more significant than +/- 5 degrees, you should call Don Bacon Appliance to have your Sub-Zero ...

What temperature should a sub zero refrigerator be?

Your Sub-Zero Refrigerator temperature setting should be set to 38°F. While you can set the temperature lower or higher depending on your preferences, a temperature above 45 degrees is not safe. According to the FDA, food stored at temperatures above 45°F for more than two hours will spoil.

How to clean a sub zero refrigerator?

You can easily clean the condenser coils on your Sub-Zero 550 Refrigerator yourself: 1 Unplug your refrigerator from the wall or turn off its circuit breaker. 2 Remove the grille and use an appliance brush and vacuum to remove dirt and dust. 3 Replace the grille and allow 24 hours for the temperatures to return to normal.

How to fix refrigerator temperature?

Simple solutions include making sure your refrigerator door closes properly. Clear any food or objects that won’t let to door close and seal correctly. A lack of food or new food also raises the temperatures in your refrigerator. Add more food or water bottles and allow a few hours for the temperature to stabilize.

How long does it take for a refrigerator to stabilize?

A new refrigerator’s temperature fluctuates as it reaches its desired temperature setting, and can take up to 24 hours to stabilize. Other influences include the level of humidity and external room temperature. Even everyday actions like opening and closing the door can cause fluctuations.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9
8.3.21PHP Version2.79sRequest Duration2MBMemory UsageGET {post}Route
  • warninglog[01:38:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[01:38:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\QueryFormatter:...
  • warninglog[01:38:53] LOG.warning: Callables of the form ["Swift_SmtpTransport", "Swift_Transport_EsmtpTranspor...
  • warninglog[01:38:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[01:38:53] LOG.warning: Creation of dynamic property Barryvdh\Debugbar\DataFormatter\SimpleFormatter...
  • warninglog[01:38:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[01:38:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[01:38:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[01:38:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[01:38:53] LOG.warning: json_decode(): Passing null to parameter #1 ($json) of type string is deprec...
  • warninglog[01:38:53] LOG.warning: mt_rand(): Passing null to parameter #2 ($max) of type int is deprecated in ...
  • Booting (22.39ms)
  • Application (2.77s)
  • 1 x Application (99.18%)
    2.77s
    1 x Booting (0.8%)
    22.39ms
    7 templates were rendered
    • themes.DevBlog.content.post (resources/views/themes/DevBlog/content/post.blade.php)34blade
      Params
      0
      post
      1
      postContent
      2
      author
      3
      updated_at
      4
      bing_rich_snippet_text
      5
      bing_rich_snippet_link
      6
      bing_related_keywords
      7
      google_related_keywords
      8
      bing_news_title
      9
      bing_news_description
      10
      bing_videos
      11
      bing_images
      12
      bing_search_result_title
      13
      bing_search_result_description
      14
      bing_search_result_url
      15
      bing_paa_questions
      16
      bing_paa_answers
      17
      bing_slider_faq_questions
      18
      bing_slider_faq_answers
      19
      bing_pop_faq_questions
      20
      bing_pop_faq_answers
      21
      bing_tab_faq_questions
      22
      bing_tab_faq_answers
      23
      google_faq_questions
      24
      google_faq_answers
      25
      google_rich_snippet
      26
      google_search_result
      27
      indexedArray
      28
      total_images
      29
      total_videos
      30
      settings
      31
      url_current
      32
      menus
      33
      sidebar
    • themes.DevBlog.layouts.master (resources/views/themes/DevBlog/layouts/master.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.head (resources/views/themes/DevBlog/panels/head.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.header (resources/views/themes/DevBlog/panels/header.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.navbar (resources/views/themes/DevBlog/panels/navbar.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.footer (resources/views/themes/DevBlog/panels/footer.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    • themes.DevBlog.panels.scripts (resources/views/themes/DevBlog/panels/scripts.blade.php)41blade
      Params
      0
      __env
      1
      app
      2
      errors
      3
      post
      4
      postContent
      5
      author
      6
      updated_at
      7
      bing_rich_snippet_text
      8
      bing_rich_snippet_link
      9
      bing_related_keywords
      10
      google_related_keywords
      11
      bing_news_title
      12
      bing_news_description
      13
      bing_videos
      14
      bing_images
      15
      bing_search_result_title
      16
      bing_search_result_description
      17
      bing_search_result_url
      18
      bing_paa_questions
      19
      bing_paa_answers
      20
      bing_slider_faq_questions
      21
      bing_slider_faq_answers
      22
      bing_pop_faq_questions
      23
      bing_pop_faq_answers
      24
      bing_tab_faq_questions
      25
      bing_tab_faq_answers
      26
      google_faq_questions
      27
      google_faq_answers
      28
      google_rich_snippet
      29
      google_search_result
      30
      indexedArray
      31
      total_images
      32
      total_videos
      33
      settings
      34
      url_current
      35
      menus
      36
      sidebar
      37
      i
      38
      __currentLoopData
      39
      loop
      40
      item
    uri
    GET {post}
    middleware
    web, checkdate
    as
    post.show
    controller
    App\Http\Controllers\Frontend\json_data\PostController@show
    namespace
    where
    file
    app/Http/Controllers/Frontend/json_data/PostController.php:18-166
    7 statements were executed2.75s
    • select * from `posts` where `published_at` <= '2025-06-24 01:38:53' and `slug` = 'what-temperature-should-my-sub-zero-refrigerator-be-set-at' and `posts`.`deleted_at` is null limit 1
      3.74ms/app/Providers/RouteServiceProvider.php:54receivinghelpdeskask
      Metadata
      Bindings
      • 0. 2025-06-24 01:38:53
      • 1. what-temperature-should-my-sub-zero-refrigerator-be-set-at
      Backtrace
      • 15. /app/Providers/RouteServiceProvider.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/Router.php:842
      • 19. Route binding:39
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/framework/src/Illuminate/Foundation/Http/Middleware/VerifyCsrfToken.php:78
    • select * from `json_post_contents` where `json_post_contents`.`post_id` = 169776 and `json_post_contents`.`post_id` is not null and `rewrite_id` = 0
      5.29msmiddleware::checkdate:30receivinghelpdeskask
      Metadata
      Bindings
      • 0. 169776
      • 1. 0
      Backtrace
      • 19. middleware::checkdate:30
      • 20. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 21. /vendor/laravel/jetstream/src/Http/Middleware/ShareInertiaData.php:61
      • 22. /vendor/laravel/framework/src/Illuminate/Pipeline/Pipeline.php:167
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/Middleware/SubstituteBindings.php:50
    • select * from `nova_menu_menus` where `slug` = 'header' limit 1
      1.21ms/vendor/outl1ne/nova-menu-builder/src/helpers.php:32receivinghelpdeskask
      Metadata
      Bindings
      • 0. header
      Backtrace
      • 15. /vendor/outl1ne/nova-menu-builder/src/helpers.php:32
      • 17. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 18. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 19. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
      • 20. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:205
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`menu_id` = 1 and `nova_menu_menu_items`.`menu_id` is not null and `parent_id` is null order by `parent_id` asc, `order` asc, `name` asc
      850μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Bindings
      • 0. 1
      Backtrace
      • 19. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 20. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 22. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 23. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 24. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select * from `nova_menu_menu_items` where `nova_menu_menu_items`.`parent_id` in (1) order by `order` asc
      330μs/vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35receivinghelpdeskask
      Metadata
      Backtrace
      • 24. /vendor/outl1ne/nova-menu-builder/src/Models/Menu.php:35
      • 25. /vendor/outl1ne/nova-menu-builder/src/helpers.php:33
      • 27. /vendor/laravel/framework/src/Illuminate/Routing/Controller.php:54
      • 28. /vendor/laravel/framework/src/Illuminate/Routing/ControllerDispatcher.php:45
      • 29. /vendor/laravel/framework/src/Illuminate/Routing/Route.php:261
    • select `id`, `post_title`, `slug` from `posts` where `status` = 'publish' and `posts`.`deleted_at` is null order by RAND() limit 10
      2.74s/app/View/Composers/SidebarView.php:22receivinghelpdeskask
      Metadata
      Bindings
      • 0. publish
      Backtrace
      • 14. /app/View/Composers/SidebarView.php:22
      • 15. /app/View/Composers/SidebarView.php:12
      • 16. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:124
      • 17. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:162
      • 20. /vendor/laravel/framework/src/Illuminate/View/Concerns/ManagesEvents.php:177
    • select * from `fake_users` where `fake_users`.`id` = 26314 limit 1
      930μsview::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15receivinghelpdeskask
      Metadata
      Bindings
      • 0. 26314
      Backtrace
      • 21. view::2dd102cf0462e89a4d4d8bc77355d767652bf9aa:15
      • 23. /vendor/laravel/framework/src/Illuminate/Filesystem/Filesystem.php:108
      • 24. /vendor/laravel/framework/src/Illuminate/View/Engines/PhpEngine.php:58
      • 25. /vendor/livewire/livewire/src/ComponentConcerns/RendersLivewireComponents.php:69
      • 26. /vendor/laravel/framework/src/Illuminate/View/Engines/CompilerEngine.php:61
    App\Models\FakeUser
    1
    Outl1ne\MenuBuilder\Models\MenuItem
    1
    Outl1ne\MenuBuilder\Models\Menu
    1
    App\Models\JsonPostContent
    1
    App\Models\Post
    11
        _token
        5TMl7rZUgSuEgpyFwQvVQqxjvY5HuzIps7TkFXmS
        _previous
        array:1 [ "url" => "https://receivinghelpdesk.com/ask/what-temperature-should-my-sub-zero-refriger...
        _flash
        array:2 [ "old" => [] "new" => [] ]
        PHPDEBUGBAR_STACK_DATA
        []
        path_info
        /what-temperature-should-my-sub-zero-refrigerator-be-set-at
        status_code
        200
        
        status_text
        OK
        format
        html
        content_type
        text/html; charset=UTF-8
        request_query
        []
        
        request_request
        []
        
        request_headers
        0 of 0
        array:25 [ "cookie" => array:1 [ 0 => "XSRF-TOKEN=eyJpdiI6InFlRC81bS9STHE5OEs2MGlmTURpNnc9PSIsInZhbHVlIjoibllZT1RrNng0ZElRaUQ1NTM1VzRPSDcwUlIreGkvbjMvS1VMeld0dzZUREs3cm9MMDN0aytvS29lL3F0MG15eWl3OHR0WlhoNE8xa2w5VzJSUGgzTlBxZ3R1RitvdUJMZUt5RzFMQW1BMmhNQnhTaTNQK2pMZlBPNW9IV2xvNS8iLCJtYWMiOiJhYWFjM2Y5NmIxOGIxN2RhMWY2ZmE0Y2Q1YjE3ODhmYWNmMDVjNWMzYzllOTIwNmQwNTA2YWMwMDlmNzk1YTdjIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InBHR2ZMc3ZZaHIvZWtNYmlkZ3FmVGc9PSIsInZhbHVlIjoiamR4dmRlUWM0b1RQNmdIbDJtMGFFZTlpMC80Zm9DN1RFcXN1VnZhK3MzT0lDUzBZeGJ2eHNzdTd2K0VOMVl1akJ4a1ZsMWNwa0xQRFZ5WUlGQ0FHbUJwM1oybE1LZlozUzZOTU5WSUJ6K2ZVU2VBeUxDd3haTmtpdy84UEliWCsiLCJtYWMiOiI5Y2QwNDZlYjBlMzI5OWI5M2M0Y2Q1ODZkMDllY2M3M2U3OGQ1MWY4YmRkMTY4OWQxZjBkYzhjZDE0NDk1MDZiIiwidGFnIjoiIn0%3D; _pk_id.64.7c30=a4cc8f4a877edc84.1750709330.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6InFlRC81bS9STHE5OEs2MGlmTURpNnc9PSIsInZhbHVlIjoibllZT1RrNng0ZElRaUQ1NTM1VzRPSDcwUlIreGkvbjMvS1VMeld0dzZUREs3cm9MMDN0aytvS29lL3F0MG15eWl3OHR0W" ] "cf-ipcountry" => array:1 [ 0 => "US" ] "cf-connecting-ip" => array:1 [ 0 => "216.73.216.237" ] "cdn-loop" => array:1 [ 0 => "cloudflare; loops=1" ] "sec-fetch-mode" => array:1 [ 0 => "navigate" ] "sec-fetch-site" => array:1 [ 0 => "none" ] "accept" => array:1 [ 0 => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" ] "user-agent" => array:1 [ 0 => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" ] "upgrade-insecure-requests" => array:1 [ 0 => "1" ] "sec-ch-ua-platform" => array:1 [ 0 => ""Windows"" ] "sec-ch-ua-mobile" => array:1 [ 0 => "?0" ] "sec-ch-ua" => array:1 [ 0 => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" ] "cache-control" => array:1 [ 0 => "no-cache" ] "pragma" => array:1 [ 0 => "no-cache" ] "accept-encoding" => array:1 [ 0 => "gzip, br" ] "cf-ray" => array:1 [ 0 => "95469eb3c821ddf4-ORD" ] "priority" => array:1 [ 0 => "u=0, i" ] "sec-fetch-dest" => array:1 [ 0 => "document" ] "sec-fetch-user" => array:1 [ 0 => "?1" ] "cf-visitor" => array:1 [ 0 => "{"scheme":"https"}" ] "connection" => array:1 [ 0 => "close" ] "x-forwarded-proto" => array:1 [ 0 => "https" ] "x-forwarded-for" => array:1 [ 0 => "216.73.216.237, 172.70.179.95" ] "x-server-addr" => array:1 [ 0 => "154.12.239.204" ] "host" => array:1 [ 0 => "receivinghelpdesk.com" ] ]
        request_server
        0 of 0
        array:56 [ "USER" => "runcloud" "HOME" => "/home/runcloud" "SCRIPT_NAME" => "/ask/index.php" "REQUEST_URI" => "/ask/what-temperature-should-my-sub-zero-refrigerator-be-set-at" "QUERY_STRING" => "" "REQUEST_METHOD" => "GET" "SERVER_PROTOCOL" => "HTTP/1.0" "GATEWAY_INTERFACE" => "CGI/1.1" "REDIRECT_URL" => "/ask/what-temperature-should-my-sub-zero-refrigerator-be-set-at" "REMOTE_PORT" => "44514" "SCRIPT_FILENAME" => "/home/runcloud/webapps/ReceivingHelpDesk/ask/index.php" "SERVER_ADMIN" => "you@example.com" "CONTEXT_DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "CONTEXT_PREFIX" => "" "REQUEST_SCHEME" => "http" "DOCUMENT_ROOT" => "/home/runcloud/webapps/ReceivingHelpDesk/" "REMOTE_ADDR" => "172.70.179.95" "SERVER_PORT" => "80" "SERVER_ADDR" => "127.0.0.1" "SERVER_NAME" => "receivinghelpdesk.com" "SERVER_SOFTWARE" => "Apache/2.4.63 (Unix) OpenSSL/1.1.1f" "SERVER_SIGNATURE" => "" "LD_LIBRARY_PATH" => "/RunCloud/Packages/apache2-rc/lib" "PATH" => "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin" "HTTP_COOKIE" => "XSRF-TOKEN=eyJpdiI6InFlRC81bS9STHE5OEs2MGlmTURpNnc9PSIsInZhbHVlIjoibllZT1RrNng0ZElRaUQ1NTM1VzRPSDcwUlIreGkvbjMvS1VMeld0dzZUREs3cm9MMDN0aytvS29lL3F0MG15eWl3OHR0WlhoNE8xa2w5VzJSUGgzTlBxZ3R1RitvdUJMZUt5RzFMQW1BMmhNQnhTaTNQK2pMZlBPNW9IV2xvNS8iLCJtYWMiOiJhYWFjM2Y5NmIxOGIxN2RhMWY2ZmE0Y2Q1YjE3ODhmYWNmMDVjNWMzYzllOTIwNmQwNTA2YWMwMDlmNzk1YTdjIiwidGFnIjoiIn0%3D; askhelpdesk_session=eyJpdiI6InBHR2ZMc3ZZaHIvZWtNYmlkZ3FmVGc9PSIsInZhbHVlIjoiamR4dmRlUWM0b1RQNmdIbDJtMGFFZTlpMC80Zm9DN1RFcXN1VnZhK3MzT0lDUzBZeGJ2eHNzdTd2K0VOMVl1akJ4a1ZsMWNwa0xQRFZ5WUlGQ0FHbUJwM1oybE1LZlozUzZOTU5WSUJ6K2ZVU2VBeUxDd3haTmtpdy84UEliWCsiLCJtYWMiOiI5Y2QwNDZlYjBlMzI5OWI5M2M0Y2Q1ODZkMDllY2M3M2U3OGQ1MWY4YmRkMTY4OWQxZjBkYzhjZDE0NDk1MDZiIiwidGFnIjoiIn0%3D; _pk_id.64.7c30=a4cc8f4a877edc84.1750709330.; _pk_ses.64.7c30=1XSRF-TOKEN=eyJpdiI6InFlRC81bS9STHE5OEs2MGlmTURpNnc9PSIsInZhbHVlIjoibllZT1RrNng0ZElRaUQ1NTM1VzRPSDcwUlIreGkvbjMvS1VMeld0dzZUREs3cm9MMDN0aytvS29lL3F0MG15eWl3OHR0W" "HTTP_CF_IPCOUNTRY" => "US" "HTTP_CF_CONNECTING_IP" => "216.73.216.237" "HTTP_CDN_LOOP" => "cloudflare; loops=1" "HTTP_SEC_FETCH_MODE" => "navigate" "HTTP_SEC_FETCH_SITE" => "none" "HTTP_ACCEPT" => "text/html,application/xhtml+xml,application/xml;q=0.9,image/avif,image/webp,image/apng,*/*;q=0.8,application/signed-exchange;v=b3;q=0.7" "HTTP_USER_AGENT" => "Mozilla/5.0 AppleWebKit/537.36 (KHTML, like Gecko; compatible; ClaudeBot/1.0; +claudebot@anthropic.com)" "HTTP_UPGRADE_INSECURE_REQUESTS" => "1" "HTTP_SEC_CH_UA_PLATFORM" => ""Windows"" "HTTP_SEC_CH_UA_MOBILE" => "?0" "HTTP_SEC_CH_UA" => ""Chromium";v="130", "HeadlessChrome";v="130", "Not?A_Brand";v="99"" "HTTP_CACHE_CONTROL" => "no-cache" "HTTP_PRAGMA" => "no-cache" "HTTP_ACCEPT_ENCODING" => "gzip, br" "HTTP_CF_RAY" => "95469eb3c821ddf4-ORD" "HTTP_PRIORITY" => "u=0, i" "HTTP_SEC_FETCH_DEST" => "document" "HTTP_SEC_FETCH_USER" => "?1" "HTTP_CF_VISITOR" => "{"scheme":"https"}" "HTTP_CONNECTION" => "close" "HTTP_X_FORWARDED_PROTO" => "https" "HTTP_X_FORWARDED_FOR" => "216.73.216.237, 172.70.179.95" "HTTP_X_SERVER_ADDR" => "154.12.239.204" "HTTP_HOST" => "receivinghelpdesk.com" "HTTPS" => "on" "REDIRECT_STATUS" => "200" "REDIRECT_HTTPS" => "on" "FCGI_ROLE" => "RESPONDER" "PHP_SELF" => "/ask/index.php" "REQUEST_TIME_FLOAT" => 1750709333.1057 "REQUEST_TIME" => 1750709333 ]
        request_cookies
        0 of 0
        array:4 [ "XSRF-TOKEN" => "5TMl7rZUgSuEgpyFwQvVQqxjvY5HuzIps7TkFXmS" "askhelpdesk_session" => "4LTbaj6ecvIyl8kQ70YaA0Bzrgq1e3Qaf4Kaq6hj" "_pk_id_64_7c30" => null "_pk_ses_64_7c30" => null ]
        response_headers
        0 of 0
        array:7 [ "content-type" => array:1 [ 0 => "text/html; charset=UTF-8" ] "cache-control" => array:1 [ 0 => "private, must-revalidate" ] "date" => array:1 [ 0 => "Mon, 23 Jun 2025 20:08:53 GMT" ] "pragma" => array:1 [ 0 => "no-cache" ] "expires" => array:1 [ 0 => -1 ] "set-cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IktXbnkyVm9ZWS9OUUQyZTM4OWRud2c9PSIsInZhbHVlIjoiOEdCaWl0ZlNneml2WVpIWldNajZOMzU0a0dmem83UTVQWEVyQU5kWHRlN1VXYnRCaHVYQnpQN3lobUh5L0tBaFFuUUNGRUtXb3lMRHNrYVZLV1FyeVQ4MHJrMWsvblFxVmEzNEV6R3VOYlJBQVFJNTFReTF5akVvWHFycVJKbXoiLCJtYWMiOiIzMzJlZjcyYzU5MTA5YjA3MjcwMDYzOTY4ZTY5NDk1NDZmNDUwZTliZDM2ZDc5ZjRkYmJhODgwZmY3NzBjM2ZhIiwidGFnIjoiIn0%3D; expires=Mon, 23-Jun-2025 22:08:55 GMT; Max-Age=7200; path=/; samesite=laxXSRF-TOKEN=eyJpdiI6IktXbnkyVm9ZWS9OUUQyZTM4OWRud2c9PSIsInZhbHVlIjoiOEdCaWl0ZlNneml2WVpIWldNajZOMzU0a0dmem83UTVQWEVyQU5kWHRlN1VXYnRCaHVYQnpQN3lobUh5L0tBaFFuUUNGR" 1 => "askhelpdesk_session=eyJpdiI6IkhrQ3BhZ3FDbVl4VmNnTEV0d1o2RlE9PSIsInZhbHVlIjoiRE9abXVmOGF5d3BSZFBxUDNuclZpQ0ZFQjlIUTRJbHdjN00xaEpoQmc5MHBUZlRUUVJnWTdZQ1M4anc0V0VCTUVya3ZSTVVrU2FkN1VyeExBakc5VHhIZWIzcUp0SEUzamNJa0RxUjVSeFJ1Q1JEclRUblZBM0wxTU5qUjhmdmQiLCJtYWMiOiIzMDU2MmVlN2IyYzEyMGNlYzZlMGQ4MmJlZmM3ZmE3Nzk3Mzg2ZWRhNjI5OTc0OTcxMWI0OWIwZTAwNjY0NzYyIiwidGFnIjoiIn0%3D; expires=Mon, 23-Jun-2025 22:08:55 GMT; Max-Age=7200; path=/; httponly; samesite=laxaskhelpdesk_session=eyJpdiI6IkhrQ3BhZ3FDbVl4VmNnTEV0d1o2RlE9PSIsInZhbHVlIjoiRE9abXVmOGF5d3BSZFBxUDNuclZpQ0ZFQjlIUTRJbHdjN00xaEpoQmc5MHBUZlRUUVJnWTdZQ1M4anc0V0VC" ] "Set-Cookie" => array:2 [ 0 => "XSRF-TOKEN=eyJpdiI6IktXbnkyVm9ZWS9OUUQyZTM4OWRud2c9PSIsInZhbHVlIjoiOEdCaWl0ZlNneml2WVpIWldNajZOMzU0a0dmem83UTVQWEVyQU5kWHRlN1VXYnRCaHVYQnpQN3lobUh5L0tBaFFuUUNGRUtXb3lMRHNrYVZLV1FyeVQ4MHJrMWsvblFxVmEzNEV6R3VOYlJBQVFJNTFReTF5akVvWHFycVJKbXoiLCJtYWMiOiIzMzJlZjcyYzU5MTA5YjA3MjcwMDYzOTY4ZTY5NDk1NDZmNDUwZTliZDM2ZDc5ZjRkYmJhODgwZmY3NzBjM2ZhIiwidGFnIjoiIn0%3D; expires=Mon, 23-Jun-2025 22:08:55 GMT; path=/XSRF-TOKEN=eyJpdiI6IktXbnkyVm9ZWS9OUUQyZTM4OWRud2c9PSIsInZhbHVlIjoiOEdCaWl0ZlNneml2WVpIWldNajZOMzU0a0dmem83UTVQWEVyQU5kWHRlN1VXYnRCaHVYQnpQN3lobUh5L0tBaFFuUUNGR" 1 => "askhelpdesk_session=eyJpdiI6IkhrQ3BhZ3FDbVl4VmNnTEV0d1o2RlE9PSIsInZhbHVlIjoiRE9abXVmOGF5d3BSZFBxUDNuclZpQ0ZFQjlIUTRJbHdjN00xaEpoQmc5MHBUZlRUUVJnWTdZQ1M4anc0V0VCTUVya3ZSTVVrU2FkN1VyeExBakc5VHhIZWIzcUp0SEUzamNJa0RxUjVSeFJ1Q1JEclRUblZBM0wxTU5qUjhmdmQiLCJtYWMiOiIzMDU2MmVlN2IyYzEyMGNlYzZlMGQ4MmJlZmM3ZmE3Nzk3Mzg2ZWRhNjI5OTc0OTcxMWI0OWIwZTAwNjY0NzYyIiwidGFnIjoiIn0%3D; expires=Mon, 23-Jun-2025 22:08:55 GMT; path=/; httponlyaskhelpdesk_session=eyJpdiI6IkhrQ3BhZ3FDbVl4VmNnTEV0d1o2RlE9PSIsInZhbHVlIjoiRE9abXVmOGF5d3BSZFBxUDNuclZpQ0ZFQjlIUTRJbHdjN00xaEpoQmc5MHBUZlRUUVJnWTdZQ1M4anc0V0VC" ] ]
        session_attributes
        0 of 0
        array:4 [ "_token" => "5TMl7rZUgSuEgpyFwQvVQqxjvY5HuzIps7TkFXmS" "_previous" => array:1 [ "url" => "https://receivinghelpdesk.com/ask/what-temperature-should-my-sub-zero-refrigerator-be-set-at" ] "_flash" => array:2 [ "old" => [] "new" => [] ] "PHPDEBUGBAR_STACK_DATA" => [] ]