What size trailer do I need for a 22 foot boat? Single or Multiple Axles. Trailers with one axle are for smaller boats. Typically, a single-axle trailer can accommodate a boat up to 22' (6.7 m) or 23' (7.01 m) with a maximum weight of 3,300 lbs. (1,369 kg) to 3,500 lbs.
Full Answer
What size boat trailer do I need for my Boat?
Most experts recommend bunk-style trailers for large boats long over 25 feet (7.6 m) since they offer full weight support and keep the vessel immobile during towing. Knowing the pontoon dimensions and weight is not always enough to choose the right trailer size.
What type of boat trailer is best for You?
The scissor trailer is best for people who want to trailer quickly and with as little hassle as possible. It suits those pontoon boat owners who don’t have to travel far to launch their boats.
How much tongue weight is required for a boat trailer?
Axle position may have to be moved toward the rear to achieve correct tongue weight of 5% to 7% of the total boat’s weight. There are 2 types of inboard engine configurations that concern trailer fit. One is a straight shaft and the other is a V drive.
Do I need a tandem axle boat trailer?
If your boat is particularly large, you may want to consider a tandem axle trailer. Tandem axle trailers are usually used for boats of 5.5m in length, and over. But how can you tell when you really need one?
What size trailer does my boat need?
To calculate needed trailer capacity, calculate the total weight including the boat, the engine, a full fuel tank (approximately 7 lbs. per gallon), full water tanks (if applicable) and your personal gear. A good rule of thumb is to use 10% of boat, motor, and liquid weights for personal gear.
How much does a trailer for a 22 foot boat weigh?
A smaller travel trailer – about 22 feet long or less – has an average weight of about 2,800 pounds. The unloaded weight range is typically between 1,200 and 3,900 pounds.
Can you trailer a 23 foot boat?
Typically, a single-axle trailer can accommodate a boat up to 22' (6.7 m) or 23' (7.01 m) with a maximum weight of 3,300 lbs.
How much longer should a boat trailer be than the boat?
about two feet longerLength should be measured from the farthest point at the bow to the end of the hull's running surface. In general, trailers are typically about two feet longer than the boat itself.
How much weight can a 3500 pound axle carry?
The carrying capacity of two 3,500 pound axles is 7,000 pounds. The axles support not only the cargo's weight but also the weight of the trailer's frame and body.
How much weight can 2 7000 lb axle carry?
Expert Reply: A trailer that has two 7,000 lb axles has an axle capacity of 14,000 lbs, but trailers aren't always limited by the axles which means a trailer could be rated for 12,000 lbs but have to 7k axles which means it's overall capacity is still 12,000 lbs.
How long is trailer for 21 foot boat?
Some experts even recommend that the difference between pontoon and trailer sizes is 4 feet (1.2 m) in ideal conditions. In other words, the ideal trailer size for a pontoon boat should be: From 20 to 22 feet (6.1 – 6.7 m) for 18 feet (5.5 m) long pontoon. From 23 to 25 feet (7 – 7.6 m) for 21 feet (6.4 m) long pontoon.
What size boat is towable?
Generally, when a boat exceeds 45 feet, it cannot be towed without a commercial trailer and rig. So if you are planning on getting a boat that exceeds that length, you may not need to worry about towing.
Why should a boats gas tank never be completely filled?
It's important to never fill the tank of your boat beyond 90% full. This leaves room for gas to expand and avoids the potential for overflow. Ensure that all air vents and valves to the gas tank are open. After you're done fueling, tightly replace the gas cap.
How wide is a 21 foot boat trailer?
If you have 18-foot, 19-foot, and 21-foot boats, the width is 84 inches or 7 feet, regardless of the type of axle. But the difference is in the load capacity. If it's with a single axle, the capacity is 2,600 to 3,300 lb.
How far can a boat overhang the trailer?
Per CVC Section 35410, the load upon a vehicle, trailer or semitrailer shall not extend to the rear beyond the last point of support for a greater distance than that equal to two-thirds of the length of the wheelbase.
How do I choose a trailer?
0:023:34How To Choose a Trailer - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore shopping for a trailer you'll need to know how much weight your vehicle can pull the extraMoreBefore shopping for a trailer you'll need to know how much weight your vehicle can pull the extra weight can put significant strain on your vehicle.
How much does a single axle boat trailer weigh?
Typically, a single-axle trailer can accommodate a boat up to 22’ (6.7 m) or 23’ (7.01 m) with a maximum weight of 3,300 lbs. (1,369 kg) to 3,500 lbs. (1,587 kg). They cost less, require less maintenance and are easier to move around manually than dual-axle models. Trailers with two or more axles are for larger boats.
What is a single axle boat trailer?
A single-axle trailer is usually used for smaller single-engine boats and can be towed by a variety of vehicles. Here we see a tandem-axle bunk trailer. Trailers with two axles can accommodate a wide range of boats up to about 7,500 pounds (3,401.9 kg). Brakes make it easier to keep a trailer under control.
Why do trailers have bunks?
Bunks can be added to a trailer to improve support. Roller-style trailers are more versatile and are preferred for easier launch and retrieval. Get Hitched. Most trailers connect to the tow vehicle with a hitch that clamps to a ball on the bumper or frame-mounted receiver hitch.
What is a jack on a trailer?
A jack that bolts to the front of the trailer tongue makes it easy to lift the trailer on and off the hitch. A spare tire and mount can mean the difference between making it to the ramp or home. We highly recommend that all trailers have a spare tire.
Why do load guides on trailers work?
Load guides attached to the sides of a trailer make it easier to put back on the trailer, because when submerged the operator cannot see all of the trailer bed. Finally, bearing savers such as Bearing Buddies can extend the life of a trailer by keeping the wheel bearings bathed in a constant supply of grease.
Why do you need a trailer for a boat?
A trailer can greatly enhance the boating experience not only because it eliminates having to rent a slip, but also because it allows the owner to travel long distances to boat in new waters. A trailer also adds value to a boat, creating a more complete package. Choosing the right trailer isn’t rocket science, but there are important criteria ...
What is the GVWR of a boat trailer?
The gross vehicle weight rating (GVWR) is the maximum weight the trailer is rated to carry. For safety, add 15 percent extra weight. Tongue weight refers to how heavy the front of the trailer is. It should always be between 10 and 15 percent of the total boat-and-trailer package.
What should be bearing weight when a boat is fully trailered?
Rear support rollers should also be bearing weight when the boat is fully trailered. That will ensure that the load is evenly distributed. Minimising rear overhang is also essential. Too much, and the boat’s weight will pull up on your car’s tow hitch, making driving dangerous.
What happens if you choose a trailer that is too small?
If you choose a trailer that is too small, it may be overloaded. If you choose a trailer size that is too big for your boat, your boat may not be stable. That might leave you wondering where to start in your search for the right size boat trailer. Our advice: start by looking at your boat!
What is a tinny trailer?
For example, custom tinny trailers allow you to tow your boat into tricky and inaccessible areas. That opens up a lot of potential fishing ground that larger boats, with larger trailers, simply couldn’t cover. They’re also lighter, which means you use less fuel when towing.
Can a boat hang past a trailer?
In terms of size, your options vary. Narrow your search by measure your tinny’s length, and beam. Remember, your boat should not hang past the trailer wheels on either side. It also shouldn’t have too great an overhang at the back.
Is it easier to get a tinny trailer or a boat?
If you’ve got a relatively small tinny, picking a trailer size will probably be easy. Tinnies are quite light, and they’re also easier to secure than larger boats. That means your margin for error is a little higher. In terms of a starting point, we recommend looking at alloy trailers.
How long of a trailer do you need for a pontoon boat?
Pontoon boats take very little effort to get them moving on the water but how do you get them to the water in the first place? What size trailer do you need for a pontoon boat? An 18 foot pontoon boat requires an a 18 – 21 foot long trailer. A 21 foot pontoon boat requires a 21 – 24 foot long trailer.
What to consider when buying a pontoon boat trailer?
The size and weight of your pontoon boat are not the only things to consider when choosing a trailer. If you want to ensure your boat is safe and secure there are other keys things you need to take into account before making a trailer purchase.
How much weight can a 24 foot pontoon boat carry?
A 24 foot pontoon boat requires a 21- 27 foot long trailer. Choose a trailer with a number of axles that can accommodate the weight of your pontoon boat. A single axle trailer can carry up to 2,250 lbs. A dual axle trailer can carry 2,250 lbs to 4,800 lbs. A triple-axle trailer can carry 4,800 lbs to 6,000 lbs.
How much weight can a single axle trailer handle?
Here are the number of axles a trailer should have based on pontoon boat weight: Single axle trailer – up to 2,250 lbs. This usually equates to a 14 – 20 foot pontoon boat.
What is a bunk trailer?
A bunk trailer, also called a float-on trailer, gives the pontoon boat a much more secure hold, as the trailer fits directly under the pontoon tubes. The trailer is thus supporting the tubes unlike the scissor type of trailer. The tubes sit over the wheels of the trailer.
How many feet can you put on a pontoon boat?
If you have a 21 foot pontoon boat then common practice dictates you get a 21 foot pontoon boat trailer. If you have a 28 foot boat you get a 28 foot trailer. Simple! However, I strongly advise you not to follow common practice and instead follow best practice.
What is a scissor pontoon trailer?
Scissor pontoon trailer. Scissor trailers, also known as up/down trailers, work by fitting between the tubes on the pontoon boat. The trailer fits neatly underneath and between the 2 tubes. Obviously these trailers are not a good fit for tritoons.
How long is a trailer boat?
For trailerable boats (those under 8′ 6″ in beam, take into account two measurements — length and weight. Length should be measured from the farthest point at the bow to the end of the hull’s running surface. In general, trailers are typically about two feet longer than the boat itself. Do not use LOA (which can be influenced by extended swim ...
How much tongue weight should a boat trailer have?
As a rule of thumb, tongue weight should not exceed 10% of the gross trailer weight, the weight of the trailer itself with the fully loaded boat in place. Too little tongue weight and the trailer will sway from side to side, or surge forward and backward.
What is a winch on a boat?
Winch — A trailer winch allows the boat to be pulled up onto the trailer with relatively little effort, and also serves as a tie-down point for the bow once the boat is in place. Typically winches are mechanical, requiring a handle to be cranked to wheel the strap or cable onto the winch barrel.
What is a trailer frame made of?
Frame —The frame of a trailer gives it its structural integrity. Frames are typically made from steel or aluminum. Tubular steel offers excellent strength, as well as protection for wiring and brake lines, which can be run inside the frame. Steel can also be painted to match the color of your boat or tow rig.
How much weight do you need to have brakes on a boat trailer?
Brakes — Laws vary by state, but typically brakes are required for all wheels on any trailer that grosses in excess of 3000 pounds.
What is the suspension on a trailer?
Suspension — Wheels can be linked to the trailer frame by one of two primary suspension methods – leaf spring or torsion beam. The most traditional form of suspension, leaf springs consist of a series of curved, slender steel plates, placed atop each other, which flex to absorb shock.
Does galvanized trailer paint chip?
Paint can also chip, or dull over time. Galvanized trailers offer far superior corrosion resistance, but do not offer the potential for color.