What size motherboard fits in a mini tower? Full-tower and mid-tower cases both fit standard ATX motherboards—by far the most common motherboard size out there. Both can also fit smaller micro-ATX motherboards. Exact sizing varies from case to case, but most mid-towers run up to roughly 18 inches high and 8 or so inches wide.
How big is a mid tower motherboard?
Both can also fit smaller micro-ATX motherboards. Exact sizing varies from case to case, but most mid-towers run up to roughly 18 inches high and 8 or so inches wide. Click to see full answer.
What are the specs of a Mini ITX motherboard?
Here are the typical specs of a Mini ITX motherboard: If you are getting a processor with decent integrated graphics, such as an AMD Ryzen APU, then you don’t have to worry if it has a graphics card slot.
How big is the PCI slot on a mini tower?
Earlier motherboards conventionally have a standard 33 MHz 5V 32-bit PCI slot. In respect to this, how big is a mini tower? A mini-tower case usually has between one and two external 3.5” bays, between one and two 5.25” bays, and between two and four internal 3.5” bays.
What is this motherboard sizes guide?
This motherboard sizes guide is all you need to pick your next motherboard. You will learn everything there is to know about Mini ITX, Micro ATX, ATX, Extended ATX, and XL ATX motherboards. There are some reasons why you might want one over the other and this motherboard sizes guid e is going to help you figure it out. Let’s get started!
Does motherboard size matter?
Can a mobo fit a micro ATX?
Will an ATX motherboard fit in a Mini tower?
Yes, if the mini-tower is ATX compatible.
Can micro ATX fit in mini tower?
Yes, you can. The mounting holes on an mATX board are the same as an ATX board - they just have less of them because the board isn't as large.
What size is a mini ATX motherboard?
Size. With dimensions of 15 × 15 cm (5.9 × 5.9 in), an AOpen-spec Mini-ATX motherboard can be placed into a single DIN space for standardized application conditions such as a car, rack mount, tower case, wall mount, etc.
What size motherboard fits in a mid tower?
Size matters for PC cases Full-tower and mid-tower cases both fit standard ATX motherboards—by far the most common motherboard size out there. Both can also fit smaller micro-ATX motherboards. Exact sizing varies from case to case, but most mid-towers run up to roughly 18 inches high and 8 or so inches wide.
Can a Micro-ATX fit in a full tower?
Yes, certain ATX full towers will support Micro-ATX motherboards. Most Xclio cases will support Micro-ATX, but there are other companies that will as well.
Is Mini ATX and Micro-ATX the same?
Mini-ITXs are even smaller motherboards with a length and height shorter than both micro-ATXs and standard-ATXs. The micro-ITXs usually have only one PCIe lane and are compatible with far more small form-factor cases.
Can an ATX motherboard fit in a Micro-ATX case?
Banned. The board compartment is only tall enough for a Micro ATX motherboard, so a full ATX motherboard simply wouldn't fit into the case.
Which is bigger Mini ATX or Micro-ATX?
One of the first differences you'll notice between the three form factors is their sizes. The standard ATX is the largest at 305 by 244 mm. The micro ATX is at second largest at 244 by 244 mm. Finally, the smallest is the mini ITX, which is 170 by 170 mm.
How big is a Micro-ATX Mini Tower?
In computer design, microATX (sometimes referred to as μATX, uATX or mATX) is a standard motherboard form factor introduced in December 1997. The maximum size of a microATX motherboard is 9.6 × 9.6 in (244 × 244 mm).
Are mini towers good?
A mini-tower or an SFF case is a good option for regular PC users who use their PCs for MS office, browsing the internet, watching movies, and other work that is less hardware intensive. They are compact and hence portable. You will be able to fit a Mini ITX motherboard only.
Is ATX better than micro ATX?
Fortunately, mATX motherboards are perfect for budget-friendly gaming PCs, as they still have all of the main features that standard ATX motherboards have. The only real difference is that standard ATX motherboards offer better aesthetics, more PCIe slots, and beefier VRMs for overclocking.
Do all PC cases fit all motherboards?
The short answer to the question “do all motherboards fit in any case?” is a NO. Not all motherboards can fit in any PC case since both motherboards and PC cases come in different sizes. There are certain PC cases that can fit all types of standard motherboards, but then there are a few that do not.
Why are mini ATX motherboards so hard to make?
This is because Mini ITX motherboards are a bit harder to manufacture due to their tiny size and limited space and larger boards have more components and features. If you wonder what the specs of a standard Micro ATX motherboard are, this motherboard sizes guide is here to tell you:
What is the smallest form factor?
The Mini ITX form factor is the smallest of the bunch. It is the perfect choice for a tiny computer that can sit on pretty much any desk, but it is even more popular as a living room computer. If you are buying a Mini ITX motherboard, then you probably have already picked a case that will fit perfectly under your TV, just like a console.
Is an ATX motherboard bigger than an ATX?
Extended ATX, also known as EATX, motherboards are even bigger than ATX motherboards. This makes them better at dissipating heat and easier to work with when you compare them to smaller form factors. The exact number and type of expandability that you can expect from an EATX motherboard vary a lot, depending on which one you are getting.
Is there a difference between ATX motherboards?
But bear in mind that not all motherboards are created equal and there are huge differences in expandability and features even between two ATX motherboards. This motherboard sizes guide serves only as an introduction to all these different sizes.
How big is an ATX motherboard?
A full-size ATX board has a height of 305mm and a width of 244mm, or 12 x 9.6 inches. When you’re planning a build, if you’re picking up an ATX motherboard, you’re going to want to pair it with a ATX-compatible PC case. These can either be super-towers, full-towers, middle-towers, or mini-towers.
What is the smallest PC board?
Mini-ITX boards are 170x170mm (6.7×6.7inches) and are the smallest type of board that can still run full-sized PC components. While the mATX could still function in most aspects like an ATX board, mini-ITX boards are more of a compromise.
What is an extended ATX board?
Extended ATX boards are slightly bigger ATX boards. I know, kind of anticlimactic. These boards are slightly bigger, measuring 305x330mm (12 x 13 inches rather than 12 x 9.6), giving you more connectors. They sometimes have dual-socket support, allowing you to run two CPUs using the same board, but that’s not always the case.
How many RAM DIMMs does an ATX have?
The ATX board is built for running all sorts of systems. With at least 4 RAM DIMMs, it can support dual or quad-channel memory, giving the user better performance in specific applications over a board that doesn’t support this type of configuration.
Can you use expansion slots on a building?
You can use the expansion slots to further customize your build, and you can run powerful hardware at great temperatures. Cooling will never be an issue, with middle-tower and full-tower cases supporting air, hybrid, and water-cooled builds, and the entire building process is much more user-friendly.
Mini tower and motherboard size - help!
Hi, My uncle's motherboard has gone, and he wants to replace and upgrade. He's given me the specs of his current machine as:
Thanks to Michael from
Great, thanks Michael. So in general a Micro ATX MB will fit a mini tower case?
Thanks to synaesthesia from
I'm not sure- certainly more than when I built a PC 8 yrs ago. Do you know of a cheaper site?
Thanks to Michael from
The actual reason for the shock at the price was having put together 3 mini ATX based systems at a whopping £135 each with 2gb RAM and c2d 7400s - and this was a few days into December!
Thanks to synaesthesia from
Hmm, just to stick my oar in I would be building i5 systems now, since they're getting closer in price and you can drop an i7 hyperthreading processor in at a later date (and they'll generally take DDR3 too, which is also worth planning for).
Where You Can Fit ATX Motherboards?
Actually, motherboard sizes of each category (Full tower, Mid-tower, Mini-tower) are not that specific. For example, a full tower PC case can also come in different size variants. Still, if you buy a Full tower or Mid-tower you can easily able to install ATX motherboards in them.
Does ATX Fit In Mid-Tower?
Mid-tower cases usually support ATX motherboards (also supports smaller variants like Micro-ATX and Mini-ITX). The size of a mid-tower case varies around 18-inch×9-inch×17-inch and a 12-inch×9.6-inch ATX motherboard can easily be installed within it. But, E-ATX boards are too big to install on mid-tower.
Will ATX Fit In Micro ATX Case?
Most of the Micro ATX cases only support Micro-ATX and Mini-ITX Motherboards, so ATX motherboards (because of their huge size) can’t be installed on the micro ATX cases. Rather, for installing an ATX motherboard, the user has to use an ATX case.
Will ATX Fit In E-ATX Case?
As ATX motherboards are smaller than E-ATX motherboards, so they will easily fit on E-ATX cases. In E-ATX cases, mostly all form factor motherboards from Mini-ITX (smallest) up to E-ATX (largest commercially) can be installed.
Does motherboard size matter?
Motherboard size does matter and depends on the type of PC you are building.
Can a mobo fit a micro ATX?
Check the case and the mobo's form factors are the same (or compatible). In your case the mobo is an ATX and the case can handle ITX, micro-ATX, ATX and EATX. So yes it will fit. Check if needed header connections exist in both case & mobo.
