Miter saw for baseboards Unless you are cutting very large baseboards, I would recommend sticking with a 10 or 12-inch miter saw. A 10-inch miter saw can very easily and very accurately cut 6-inch baseboards. However, if you already have a 12-inch miter saw, that is perfectly fine for cutting baseboards.
Full Answer
Which miter saw is best?
- The bevel has a 45-degree range for a cleaner cut
- Horizontal handle offers a more secure grip
- Instruction manual included for easy setup
How to set up a miter saw?
Set the saw to 45- degree, place two jointed edges of two boards on the fence and cut them together. Check the Angle. Keep the miter saw close and place the square in the interior corner. Check the square’s edges to see whether or not it maintains a full contact with the material.
Should I buy a table saw or a miter saw?
You should consider investing in a miter saw if you already own and are comfortable using the table saw. Do not get me wrong, miter saws can be extremely useful. But unless you are very experienced, it is far better to start off with a table saw and then work your way up to a miter saw.
How to cope Baseboard trim with a miter saw?
Step 4: Coping the Miter
- Rest the coping saw blade on your thumbnail to make the first cuts.
- Make relief cuts at any tight corners or angles
- Be careful when cutting sharp or exposed tips or points to avoid breaking
- Keep the coping saw angled backward at a 30-degree angle
- It is better to leave a bit of wood at the edge than to cut into the profile. ...
What kind of miter saw do I need for baseboards?
Compound Miter Saws For precise cuts, a 6-inch baseboard needs to be laid flat in an 8-1/2 inch saw to slice off a partial degree. The larger 10- and 12-inch models allow the 6-inch board to rest upright against the miter fence.
What size Mitre saw for trim work?
If you only expect to use your miter saw for cutting trim or siding, and don't plan on cutting anything more than an inch thick or 6 inches wide, a 10-inch miter saw should be sufficient. But if you need to cut larger boards, or just want more versatility, a 12-inch miter saw is the better choice.
Can you cut baseboard flat on miter saw?
Once you have set the miter angle and bevel angle, and you have the baseboard on the cutting table of the miter saw, you can turn the saw on. Hold the handle of the saw with one hand, hold the baseboard securely in place with the other, and then move the blade down through the wood until the cut has been made.
How wide of a board can a 12-inch sliding miter saw cut?
Saws start to differ when you look at their blade diameter—commonly 10 inches or 12 inches. The bigger the blade, the deeper and wider its maximum cut. Typically, a 10-inch miter saw will cut a 2 x 6 at 90 degrees and a 2 x 4 at 45 degrees; a 12-inch miter saw will cut a 2 x 8 at 90 degrees and a 2 x 6 at 45 degrees.
How do you cut a 5 inch baseboard with a miter saw?
0:343:41How to Cut Tall Baseboards Using Compound Mitre Crosscut SawYouTubeStart of suggested clipEnd of suggested clipThe bottom of this motor. So when I cut cut the saw blade like that I'm at four and a quarter maybeMoreThe bottom of this motor. So when I cut cut the saw blade like that I'm at four and a quarter maybe four and three-quarters. So I might go to cut it all the way down my baseboards 5 and 3/4 tall.
What kind of saw do I need for trim work?
There are several types of saws that you can use to work on trim work. Typically, a table saw will provide you with the most functionality for this task. However, you may also need to use a jigsaw if you will be required to cut tight areas.
How do you miter cut baseboards?
0:004:40perfect inside miter joint hack - baseboard molding install - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhat's going on guys I'm bill and welcome to Bill's out toot I'm going to show you guys how to get aMoreWhat's going on guys I'm bill and welcome to Bill's out toot I'm going to show you guys how to get a perfect inside miter cut whether you're doing crown molding or like in my case we've got some
How do you Mitre baseboard corners?
1:537:30A Simple Trick to Install Baseboard Corners Perfectly - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I've cut it at a 45 degree angle. Now the reason why we make this cut this 45 degree cut on aMoreAnd I've cut it at a 45 degree angle. Now the reason why we make this cut this 45 degree cut on a miter saw is guess what it reveals perfectly the outline for us to follow.
What angle do you cut baseboards?
45-degree angleUse a miter saw to bevel cut the end at a 45-degree angle. The cut will reveal the profile of your baseboard. With a coping saw, cut along the profile. Slightly angle the blade so that you cut away from the backside of the baseboard.
What is a 10-inch miter saw good for?
The 10-inch miter saw is pretty popular and with good reason. The 10-inch blade cuts pieces that are up to 6 inches wide, which covers most trim and molding boards. Trim is seldom more than 4 inches, so you've got plenty of wiggle room with a 10-inch miter saw.
What is the difference between a miter saw and a sliding miter saw?
A sliding miter saw is a type of miter saw that adds rails to let the saw blade slide front to back across the wood. It gives you a much greater depth of cut than the same size miter saw without rails. Most sliding miter saws also include the ability to make a compound cut.
How wide of a board can you cut with a 10 miter saw?
A saw with a 10-inch blade makes right-angle cuts across a board 5 1/2 inches wide, sufficient for two-by-six lumber. The same 10-inch saw will cut a two-by-four at a 45-degree angle. Manufacturers also make 12-inch versions, which have a maximum cut of about 7 1/2 inches, wide enough for two-by-eights.
What is a 10 inch miter saw?
The 10- and 12-inch compound miter saws can accommodate a variety of add-on options and features that the smaller models may not be designed to use . The variety of blades available for the larger saws is greater. Optional precision angle finders, extendable workpiece supports, laser blade guides and quick and easy mounting capability on a universal miter saw stand make the saws versatile for changing workplace sites. A 10-inch compound miter saw will effectively cut your 6-inch baseboard and cost less than a 12-inch model. Choose the saw that best meets your budget and your work.
What is the difference between a 10 inch and a 12 inch miter saw?
The 10- and 12-inch compound miter saws have larger scales that make precision cuts easier to accomplish than the smaller-scaled 8-1/2 inch models. If you routinely install baseboard, a larger saw will make your working life easier. Since the 12-inch saw is heavier to lug around a building site, you may wish to purchase the lighter 10-inch saw. A 10-inch saw will effectively and accurately cut 6-inch baseboards without the burden of added weight.
What is the best tool to cut angled baseboards?
A miter saw is the tool of preference for making angled cuts in baseboards. The size of saw required depends on the width and thickness of the baseboard stock that you are installing.
Can a miter box be used to cut wide stock?
A miter box with handsaw is not designed for cutting wide stock.
DEWALT 12-Inch Miter Saw
Dewalt is the most of the choice of users. This tool is including that miter which fully tries to deliver ultimate performance to the users.
BOSCH 12 Inch Corded Dual-Bevel Sliding Glide Miter Saw
Bosch is known due to its durability and power, at baseboards cutting its power enough you can take a bundle of work with this tool. And this 12 inch model is best saw for baseboards.
Skil 10 inch miter saw
Skil miter saw comes with corded electric power which is associated with a powerful 15 amp motor that generates 4500 RPM with its sharp 60T blade.
What is a miter saw?
A miter saw is an accurate tool used to make precise crosscuts and miters in a workpiece through pulling a large backsaw or a mounted circular saw blade down onto board using a fast motion. That’s why they’re often referred to as drop saws. In this guide, you will learn how to cut a baseboard using one of these powerful ...
How to cut baseboard at 45 degree angle?
Use a miter box or power miter saw to cut the baseboard at a 45-degree angle. Make sure to mark the second piece the same way and test for fitting before you nail it in place. And don’t forget to put some wood glue before you join the two pieces.
What is the best miter saw for baseboards?
The Makita LS1018 is designed in a way to give you every essential feature you need with an affordable price, we don’t want to go for those pricey miter saws, that’s why the makita is considered the best affordable miter saw for everything including baseboard cutting. It has a good cutting capacity and a powerful motor so you can cut nearly anything, from 4x4s, baseboard, framing and roofing.
How to make a coped joint?
To create one, you should butt one piece of baseboard flush against the wall at a 90-degree angle. Then, set down the other baseboard molding face-down on the floor.
How to trace a baseboard profile?
Hold a scrap piece of baseboard molding perpendicular to the face-down board and trace its profile using a pencil.
How to make a 45 degree cut on a board?
If playback doesn't begin shortly, try restarting your device.
How to cut a scarf joint?
To cut the scarf joint in the middle, position the first board in place and mark a 45-degree cut at a stud location. Then, use your miter saw to cut the end of the first board at a 45-degree angle and then smoothen it by sanding it. Make sure you don’t over sand. Hammer the baseboard in place with some finish nails and make sure their heads are ...
Is Miter Saw the Best Tool for Cutting Baseboards?
Yes, but specifically, using a compound miter saw with a 10-inch blade is the best tool for the job. The cuts are fairly simple and most baseboards are not so thick as to where you will need a 12-inch blade to make good cuts.
How to cut baseboard with a miter saw?
Set the bevel for your miter saw to 45-degrees bevel and set the miter to 0-degrees. Use a pencil to mark the back of your baseboard, so you can simply follow that line when making the cut. Then, once you have set the miter angle and bevel angle and you have the baseboard on the cutting table, you can turn the saw on and begin the cut.
What to use if you don't have a compound miter saw?
If you don’t have access to a compound miter saw, you can use an alternative like a coping saw. It is a handheld saw, so it will require more effort, but it will get you the cuts you need for your baseboards.
What happens if you don't sand trim?
If you don’t sand them, they can refuse to line up properly or leave tiny gaps in between pieces. Sanding the ends of trim can make them go together seamlessly and smoothly, as well as stay aligned and make any adhesive hold better.
Can you use a miter saw to cut baseboards?
Hopefully, you’ve now learned all you need to know on how to use a miter saw to cut baseboards and install them. When it comes to building or renovating a home, baseboards should be one of the easiest tasks if you measure and cut your materials properly.
Can you cut baseboard straight?
Instead of angling the cuts to create angled baseboard corners, some people choose to cut straight and then join them to form a perpendicular joint. Some may choose to do this step differently, but this is possible with a miter saw and is very simple.
Is Handyman's World an affiliate?
November 23, 2020. - by Handyman's World Editorial Team. Handyman's World is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. The process of cutting baseboards with a miter saw is relatively simple ...
Why Trust The Spruce?
This article is edited and updated by Michelle Ullman, the tool expert for The Spruce. She has extensive experience not only in writing about all things related to the home, but also in carrying out various DIY projects, including landscaping, painting, flooring, wallpapering, furniture makeovers, and simple repairs. For this roundup, she considered dozens of miter saws, evaluating each for basic features, extras, and customer feedback, as well as input from Andrew Wilson, home improvement contractor and founder of Contractor Adviserly .
What is the best power saw for cutting wood?
As with many power tools, there are both corded and cordless models of miter saws, but by far the most popular are corded tools with a 10-amp, 12-amp, or 15-amp motor. If you expect to use your saw to cut through thick pieces of wood, or for extended cutting sessions, you'll be happiest with a 15-amp motor. Likewise, a 12-inch blade is the best choice to tackle large boards, but if you use your saw mostly for detail work, a 10-inch blade will be sufficient.
What is a miter saw used for?
Miter saws, on the other hand, are best used for angled cuts, including miters and bevels or a combination of those two cuts, although they can also make crosscuts. They aren’t so useful for ripcuts, however, nor are they often used to cut metal or masonry.
How many crosscuts does a dual compound saw cut?
The dual compound sliding saw is compact for extra portability. Powered by two 60-volt battery packs, the 12-inch blade will last up to 289 crosscuts on a single charge. Beyond the portability, the saw also includes standard miter settings up to 50 degrees to the left and 60 degrees to the right, and an adjustable back-and-forth slide for wider woods. For longer projects, you can also plug the saw into an outlet with the supplied cord.
How wide can a 12 inch miter saw cut?
If you need to cut larger boards, including 4 x 4s or lumber up to 14 inches wide precisely and quickly, you’ll appreciate the size and power of the DEWALT 12-Inch Sliding Compound Miter Saw. This versatile tool has sliding guiderails to allow for larger or longer materials—with a special setup included in the instruction manual, you can even crosscut boards up to 16 inches across, which is especially handy if you are building cabinets, a deck or fence, or preparing lumber for hardwood flooring.
What is the maximum speed of a 15 amp saw?
While there’s no sliding rails for cutting wider materials—the maximum width is 5-21/32 inches—nor a laser for extra guidance, you do get a saw with a 15-amp motor, a no-load top speed of 5,000 rpm, a bevel range of 0-45 degrees to the left, and a miter range of 0-52 degrees to the left or right. That’s pretty much all you need to tackle most DIY projects around your home or workshop.
How many slots are there in a miter box?
The box has three 0.14-inch slots: one each for 45, 60, and 90-degree angled cuts. You can cut materials up to 2 inches in width and 7/8 inches in depth.
