Drill Bit Size Chart
| Size | Decimal Equivalent | Size | Decimal Equivalent | Size |
| 97 | 0.0059 | 2.60 mm | 0.1024 | M |
| 96 | 0.0063 | 37 | 0.104 | 7.50 mm |
| 95 | 0.0067 | 2.70 mm | 0.1063 | 19/64" |
| 94 | 0.0071 | 36 | 0.1065 | 7.60 mm |
| Size | Decimal Equivalent | Decimal Equivalent |
|---|---|---|
| .36 mm | 0.0142 | 1.1811 |
| 79 | 0.0145 | 1.1875 |
| .38 mm | 0.015 | 1.2008 |
| 1/64" | 0.0156 | 1.2031 |
What is the size of a drill bit?
Drill bit sizes are written as irreducible fractions. So, instead of 78/64 inch, or 1 14/64 inch, the size is noted as 1 7/32 inch.
What fraction is a 36 drill bit?
#36 drill bit = 0.1065 inches 0.1065 decimal as a fraction is 213/2000. However, standard fractional drill bits come in intervals of 1/64 inches. Therefore, there are no standard fractional drill bits that are the exact 213/2000 fraction that the #36 drill bit is.
What is the nearest gauge wire to a 36 drill bit?
To find the closest gauge wire #36 drill bit equivalent in fractional inches, we round 213/2000 up and down to 1/64 accuracy to get the following: Caution: Due to rounding, a 3/32 drill bit will make the hole smaller than a #36 drill bit and a 7/64 drill bit will make the hole larger than a #36 drill bit.
What is a number 36 drill?
Decimal Equivalents from # 80 to 1", .0135" to 1.000"DrillDecimalDrill75.0210"3674.0225"7/6473.0240"3572.0250"347 more rows
What size is a 6/32 drill bit?
0.1200"Common # sizes go from #80 through #1, in ascending sizes, up to ....Screw Size-TPIRecommended Hole DiameterDrill Bit Size6-320.1200"#318-320.1470"#2610-240.1730"#1710-320.1770"#169 more rows
What size is a number 30 drill bit?
This chart shows the diameters of number gauge drills size 80 (the smallest) to size 1 (the largest)....Number Drill Sizes.DrillInchmm320.1162.95310.1203.05300.12853.26290.1363.4576 more rows
What size is a 35mm drill bit?
1-3/8-Inch31 Forstner Bit, 35mm (1-3/8-Inch) Diameter, 10mm Shank.
What size is a drill bit?
Standard metric drill bit sizesDrill sizeDiameter (in)0.3 mm0.01180.4 mm0.01580.5 mm0.01970.6 mm0.0236153 more rows
What size is a number 7 drill bit?
0.2010 inchesA number 7 drill bit is 0.2010 inches. As a fraction, the 0.2010 decimal is 201/1000.
What size is a number 44 drill bit?
.086 inch ODDescription. The #44 drill bit (. 086 inch OD) is the standard bit used for nail axles from Cub Scout kits and other kits. It can be used to drill axle holes, or to create pilot holes in the standard axle slots.
What size is #21 drill bit?
5/32"To Tap This Size Screw Or Bolt:Use This Drill Bit:(Closest Fractional:)10-24 NC#255/32"3/16-32 NS#22-10-32 NF#215/32"5mm-0.90mm4.2mm-44 more rows
What size is a letter I drill bit?
This chart shows the diameters of letter gauge drills size A (the smallest) to size Z (the largest)....Letter Drill Sizes.DrillInchmmG0.2616.63H0.2666.76I0.2726.91J0.2777.0422 more rows
What is the most common drill bit size?
Drill Bit Size There are drill bit sets or packs that usually contain bit sizes that range from 1/16 of an inch to 1/4 of an inch, which are common sizes for home and shop projects. Other sizes of use would include 1/2 of an inch, 7/16 of an inch, 5/16 of an inch and 3/8 of an inch.Mar 1, 2017
What size drill bit is 6mm?
Metric Tap and Drill Bit Size TableTapMetric DrillUS Drill5mm x 0.84.3mm-6mm x 1.05.2mm-7mm x 1.06.1mm15/64"8mm x 1.256.9mm17/64"13 more rows
What are the sizes of drill bits?
Metric drill bit sizes: diameter of the bit in terms of standard metric lengths.#N#Letter drill bit sizes: the sizes are indicated in letters, from size A (the smallest) to size Z (the largest).#N#Number drill bit sizes: the sizes are indicated in numbers, range from size 80 (the smallest) to size 1 (the largest). Number and letter sizes are commonly used for twist drill bits rather than other drill forms.#N#Fractional drill bit sizes: the sizes are written as irreducible fractions. ANSI B94.11M-1979 sets size standards for jobber-length straight-shank twist drill bits from 1/64 inch through 1 inch in 1/64 inch increments.#N#Decimal drill bit sizes: written in number with 4 decimal places, equivalent to fractional-inch drill bit sizes
What is the difference between tapping and drilling?
Drilling is a process of producing a hole while tapping is a technique used to cut a thread inside a hole, so the drill bit and tapping tool are often used in sequential to fabricate CNC parts with thread holes.
