Drill sizes to 1" diameter Legend Fractional Inch Letter Drill Millimeters Number Drill
Millimeters | Inches | Designation |
2.7781 mm | .109375" | 7/64" |
2.794 mm | .11" | #35 |
2.8194 mm | .111" | #34 |
Full Answer
What size is a standard drill bit?
This final drill chart covers the standard bit sizes from 43/64 to 1 27/64. More About Drill Bit Sets and Sizing Some other helpful information to help you in your knowledge of drill bit sizes: Fractional Sizing Fractional sizing uses whole, half (1/2), quarter (1/4), eighth (1/8), sixteenths (1/16) and sixty-fourths (1/64).
What are the most common drill bit sizes?
Power Drill Buying Guide
- Cordless and Corded Drills. Power, mobility and weight are all considerations in choosing a drill. ...
- Types of Drills. Some capabilities are necessary for certain tasks, while some simply make the work easier. ...
- Other Power Drill Features. ...
- Drill Comfort and Design. ...
- More Ways to Drill or Drive. ...
What is the smallest size drill bit?
Drill bit sizes
- Metric drill bit sizes. Metric drill set, 1.0–6.0 mm by 0.1 mm, jobber length. ...
- Fractional-inch drill bit sizes. ...
- Number and letter gauge drill bit sizes. ...
- Drill bit conversion table
- Screw-machine-length drill. ...
- Jobber-length drill. ...
- Aircraft-length drill. ...
- Center drill bit sizes. ...
- Spotting drill bit sizes. ...
- See also
How to calculate drill size?
Tap Drill Calculator
- Only enter numbers in the fields.
- Do not enter any units of measurement.
- You can enter fractions. (i.e. 1/4)
- If you don't know the %, just enter 70 Example: 1/2 - 20 Thread
- 1/2 = Major diameter
- 20 = Threads / Inch (TPI)
What is 11 mm drill bit in standard size?
Drill Bit Hole DiametersMetric SizeFractional Size10 mm.393719/6411 mm.43315/1612 mm.472421/6477 more rows
What size is 11 64 drill bit?
Drill Bit Size ChartSizeDecimal EquivalentSize690.029211/64".75 mm0.029517680.0314.40 mm1/32"0.03121647 more rows
What size is a No 12 drill bit?
6.5mm x 105mm12.
What size is a No 10 drill bit?
Number Drill SizesDrillInchmm120.1894.80110.1914.85100.1934.9090.1964.9876 more rows
What number is a 10mm drill bit?
Wilko 10mm Masonry Drill Bit Number 21.
How do I know what size my drill bit is?
Typical drill bits have markings somewhere on the shank above the threads. It's small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.
What size is a 12mm drill bit in inches?
Metric Tap and Drill Bit Size TableTapMetric DrillUS Drill10mm x 1.258.9mm11/32"10mm x 1.09.1mm-12mm x 1.7510.5mm-12mm x 1.510.7mm27/64"13 more rows
Is 3/8 drill bit the same as 10mm?
3/8" bits have a nominal size being just ever so slightly under 10mm. You can't drill a hole of any size and put something in it the same size. It must be a bit smaller than the hole you drill.Oct 10, 2011
What size is #21 drill bit?
5/32"To Tap This Size Screw Or Bolt:Use This Drill Bit:(Closest Fractional:)10-24 NC#255/32"3/16-32 NS#22-10-32 NF#215/32"5mm-0.90mm4.2mm-44 more rows
How Many Drill Bit Sizes Are There?
First things first. If you were to look at the most all encompassing collection of multi-purpose, twist-type bits, how many drill bit sizes would there be?
How Do You Know What Size Drill Bits You Need?
If you’re an average weekend-warrior, you’ve probably stared at a screw or bolt for a few moments and wondered what size drill bit you would need.
How to Convert and Find Equivalent Bit Sizes
You can use the drill chart that follows this section to help convert sizes, or you can do the math yourself.
Drill Chart
As promised, here are a few drill bit charts to help you quickly convert all standard drill bit sizes to their matching measurements.
More About Drill Bit Sets and Sizing
Some other helpful information to help you in your knowledge of drill bit sizes:
What are the sizes of drill bits?
Metric drill bit sizes: diameter of the bit in terms of standard metric lengths.#N#Letter drill bit sizes: the sizes are indicated in letters, from size A (the smallest) to size Z (the largest).#N#Number drill bit sizes: the sizes are indicated in numbers, range from size 80 (the smallest) to size 1 (the largest). Number and letter sizes are commonly used for twist drill bits rather than other drill forms.#N#Fractional drill bit sizes: the sizes are written as irreducible fractions. ANSI B94.11M-1979 sets size standards for jobber-length straight-shank twist drill bits from 1/64 inch through 1 inch in 1/64 inch increments.#N#Decimal drill bit sizes: written in number with 4 decimal places, equivalent to fractional-inch drill bit sizes
What is the difference between tapping and drilling?
Drilling is a process of producing a hole while tapping is a technique used to cut a thread inside a hole, so the drill bit and tapping tool are often used in sequential to fabricate CNC parts with thread holes.
What is the standard drill bit size?
There are a variety of standards used to define drill sizes, the most common one in the UK is the British Standard BS 328 set which includes twist drill bit sizes between 0.2 mm and 25 mm.
What are drill sizes?
Another example of a metric set of drill sizes is the Renard series, which uses a simple factor to determine the diameter: 1 The R5 series uses a factor of 1.58 and contains the following sizes: M2.5, M4, M6, M10, M16 and M24 2 The R10 series uses a factor of 1.26 and contains the following sizes: M3, M5, M8, M12, M20 and M30
