What dimensions do LVLS come in? LVL is available in lengths up to 24.4 m (80 ft), while more common lengths are 14.6 m (48 ft), 17 m (56 ft), 18.3 m (60 ft) and 20.1 m (66 ft). LVL can easily be cut to length at the jobsite.
How to determine LVL size?
Technically speaking, when we talk about calories, we’re actually talking about kilocalories. Per the United States Department of Agriculture (USDA), one kilocalorie is the amount of heat required to raise the temperature of 1 kilogram of water by one degree celsius. So, calories are a measure of energy.
What size LVL do I need to span 20 feet?
That's what assessing and reacting within a five- or 10-metre span while racing with your bodies moving at 130 km/h requires. "There's really nowhere to hide on the doubles sled," Snith said.
What size LVL to span 14 feet?
can span upto 14 feet on normal weight condition which providing great stability for your projects. For span upto 14 feet, generally you need 3 × 7 1/4 standard size of LVL beam or 2×10 dimensional lumber at 16″ apart from centre on normal weight condition which providing great stability for your projects.
How do you choose the correct LVL beam span size?
Understanding Loads on Beams
- Common Sense. It has been my experience to never use a beam smaller than a two ply 2 x 8. No matter what the specs say.
- Bearing. According to the 2012 IRC codes any beam, joist, or header shall never have a bearing of less than 1 1/2″.
- Fastening. Beams of more than one ply must be fastened together with either nails or bolts. ...
What widths do LVL beams come in?
However, LVL is also available in nonstandard sizes like 9 1/2 and 11 7/8 inches all the way up to 24 inches deep. You will find that the deeper 9 1/2-inch and 11 7/8-inch versions carry a little more load than the 9 1/4-inch and 11 1/4-inch stock, but that's not why distributors push nonstandard depths.
What size LVL are available?
Standard sizes Sizes may vary according to manufacturer but Georgia Pacific says LVL standard thicknesses are 1 3/4 inches and 3 1/2 inches. Lengths are generally available in 24, 28, 32, 36, 40 and 44 feet with special orders of up to 60 feet.
What is the width of an LVL?
Design a beam width based on the fact that the typical width of an LVL beam is 1 3/4 inches. The width can be increased by laminating in multiples of 1 3/4 inches.
What is the maximum standard length of an LVL?
Due to its strength, an LVL beam can span up to 60 feet and is much stronger than traditional lumber. Generally, you can find LVL beams in 4-foot increments starting at 24 feet and going up to 44 feet long, with special orders up to 60 feet. LVL beam thickness is usually between 1 ¾ and 7 inches.12-Jan-2022
Is GLULAM the same as LVL?
A glulam beam looks like a stack of 2 x 4s (or larger lumber) glued together on their broadsides. This is in contrast to other engineered members, such as LVL (laminated veneer lumber) and Microlam beams, which look like very thick plywood, with very thin layers of wood glued together to form a thicker mass.25-Jun-2019
Is LVL stronger than dimensional lumber?
In addition to being flat and straight, engineered studs are strong. Laminated veneer lumber (LVL) studs can be two times stronger in compression and tension than standard framing lumber of the same dimension.13-Jun-2019
How wide is a 14 LVL?
Weight89.60 lbsDimensions1.75 × 14 × 168 inThickness1-3/4"Width14"Length14'1 more row
What size LVL Do I need to span 24 feet?
LVL beam size for a 24 foot span:- as per general thumb rule, for a 24 foot span, size of LVL beam or GLULAM should be 12-14 inches deep and 4 inches wide, thus you need something like a 12-14″ GLULAM or LVL to span upto 24 feet used for residential building or projects.
What size LVL Do I need to span 20 feet?
What size lvl beam for a 20 foot span:- as per general thumb rule, for a 20 foot span, size of LVL beam or GLULAM should be 10 to 12 inches deep and 3 inches wide, thus you need something like a 10-12″ GLULAM or LVL to span upto 20 feet and can use simple 2×14 dimensional lumber at 16″ apart from centre as floor joists ...
What size LVL Do I need to span 18 feet?
What size lvl beam for a 18 foot span:- as per general thumb rule, for a 18 foot span, size of LVL beam or GLULAM should be 9 to 10 inches deep and 3 inches wide, thus you need something like a 9-10″ GLULAM or LVL to span upto 18 feet and can use simple 2×12 dimensional lumber at 16″ apart from centre as floor joists ...
How far can you span a 2x12 LVL?
A 2x12 with an E of 800,000 psi and Fb of 790 psi also works, since it can span 15 feet and 10 inches. Given a design span of 15 feet 1 inch and a 16 inch joist spacing, first determine which size lumber will work.
How much does a LVL beam cost per foot?
LVL beams cost on average $3 to $12 per linear foot for the material or $50 to $200 per foot installed. LVL beams are more cost-effective and durable than regular wood beams. LVL beams are fire-resistant, shrink-proof, and easy to install, especially in long spans.11-Jan-2022
ENGINEERED WOOD PRODUCTS (EWP) LVL SPAN AND SIZE CHARTS
VERSA-LAM ® laminated veneer lumber (LVL) beams and headers eliminate twisting, shrinking and splitting, and deliver flatter, quieter floors and structures. Our VERSA-LAM ® LVL is manufactured in either Alexandria (Lena), Louisiana in Eastern United States, or in White City, Oregon for the Western United States.
US East
To download our VERSA-LAM ® span and size chart PDFs, click on the links below.
US West
To download our VERSA-LAM ® span and size chart PDFs, click on the links below.
BC Calc
BC Calc ® performs engineering analysis to help our customers size beams, joists, columns, studs and tall walls for their building projects. It is simple to use, yet flexible enough to analyze a variety of common applications. The user enters the member geometry, adds loads, holes and other relevant data and then selects a product for analysis.
How deep is a LVL?
However, LVL is also available in nonstandard sizes like 9 1/2 and 11 7/8 inches all the way up to 24 inches deep. You will find that the deeper 9 1/2-inch and 11 7/8-inch versions carry a little more load than the 9 1/4-inch and 11 1/4-inch stock, but that's not why distributors push nonstandard depths. It's actually because the manufacturers ...
Do engineered wood floors use LVLs?
That's why there's been a trend toward engineered wood floor systems, which use a combination of LVLs and I-joists but no dimension lumber. Nevertheless, manufacturers realize that builders will have projects where matching sawn lumber is required, especially in remodeling, so they also offer "standard" sizes.
How thick is a LVL?
Standard sizes. Sizes may vary according to manufacturer but Georgia Pacific says LVL standard thicknesses are 1 3/4 inches and 3 1/2 inches. Lengths are generally available in 24, 28, 32, 36, 40 and 44 feet with special orders of up to 60 feet.
What is LVL used for?
LVL can be used wherever regular lumber is used, but it is most often used for flanges in timber I-beams and ply-webbed box beams. Structural LVL can be used as structural beams — floor joists and bearers, wall girts, lintel beams and roof framing beams. Advertisement.
What is laminated veneer lumber used for?
Laminated Veneer Lumber is most commonly used as beams and joists in framing buildings. Its tensile strength makes it good for door and window headers, stair stringers, ridge beams, cantilevered roof supports and other beams. Intended generally to provide a structural function only, the surface finish of LVL is usually of low architectural quality with glue lines visible; however, if required, LVL products can be sanded and painted to give a similar finish to solid painted lumber. LVL can be used wherever regular lumber is used, but it is most often used for flanges in timber I-beams and ply-webbed box beams. Structural LVL can be used as structural beams — floor joists and bearers , wall girts, lintel beams and roof framing beams.
Can LVL be painted?
Intended generally to provide a structural function only, the surface finish of LVL is usually of low architectural quality with glue lines visible; however, if required, LVL products can be sanded and painted to give a similar finish to solid painted lumber.
Engineered Wood Products (EWP) Span and Size Charts
VERSA-LAM ® laminated veneer lumber (LVL) beams and headers eliminate twisting, shrinking and splitting, and deliver flatter, quieter floors and structures. Our VERSA-LAM ® LVL is manufactured in either Alexandria (Lena), Louisiana in Eastern United States, or in White City, Oregon for the Western United States.
US West
To download our VERSA-LAM ® span and size chart PDFs, click on the links below.
BC Calc
BC Calc ® performs engineering analysis to help our customers size beams, joists, columns, studs and tall walls for their building projects. It is simple to use, yet flexible enough to analyze a variety of common applications. The user enters the member geometry, adds loads, holes and other relevant data and then selects a product for analysis.
