Receiving Helpdesk

what lengths do 6x6 posts come in

by Mrs. Prudence Konopelski DVM Published 3 years ago Updated 3 years ago

The recommended wood span for the 4x4 and 6x6 wood posts is 12 feet in length and 8 feet in height. 5" - the industry simply calls it 6x6. Click to see full answer.

Product Specifications
Size & Dimension6-inch x 6-inch
Length22-ft
Size & Dimension.15
Wood TreatmentTreated
Wood SpecieYellow Pine
3 more rows

Full Answer

What is the standard size of a 4x4 post?

28/12/2021 · After taking all of above into account, what is the size of a 6x6 post? Standard wood post sizes, according to the timber industry, are 4x4 or 6x6 in size. In the regular 4x4 configuration, the outside dimensions are 3-1/2" x 3-1/2," and in the typical 6x6 configuration, the outside dimensions are 5-1/2" x 5-1/2."

How do you cut 6x6 posts to size?

23/04/2020 · The lumber industry defines standard wood post sizes as 4x4 or 6x6. The outside dimensions of the standard 4x4 measure 3-1/2" x 3-1/2", and the outside dimensions of the standard 6x6 measure 5-1/2" x 5-1/2".

What is the size of a fence post?

Vinyl posts normally 4” x 4”, 5” x 5” and 6” x 6” and length vary from 72” to 102”. Line posts for chain link fences made of 16 gauge galvanized metal typically 1 5/8” or 2” in diameter. Round terminal posts are 2 ½” or 3” in diameter and 8’ long. Building codes, city regulations and purpose of a fence

What is the outside size of a 6x6?

A standard pergola will most often use 6 x 6 inch posts for support. A very small pergola may use 4 x 4 inch posts as long as it has less than 4 to 6 feet between posts. As a general rule of thumb the depth of hole you use for your posts should be approximately 1/4 of the height of your post.

How long can a 6x6 post be?

The distance a 6×6 can span as a beam depends on the species of wood, grade, grain orientation, moisture content or seasoning, condition, and load. Southern Pine (SP) 6x6s will span 5” to 8” further than other common softwood species of the same grade.

How long do they make 6x6?

The G63 AMG 6×6 is 5,875 mm (231.3 in) long, 2,110 mm (83.1 in) wide, and 2,210 mm (87.0 in) tall, with 460 mm (18.1 in) of ground clearance and a fording depth of 1,000 mm (39.4 in).

How much weight can a 6x6 post support vertically?

The load capacity of a 3-foot #2 grade 4×4 is 17,426 pounds, and a similar 6×6 is 20,834 pounds or 16% better. However, an 8-foot 4×4 supports 6468-pounds and 2339-pounds at 14-feet, while a 6×6 is 18032 and 10550-pounds respectively – or 64% and 78% more load capacity.

How long will a 6x6 post last in concrete?

A PT post will last a long time in concrete, maybe 5 to 10 years in soil alone. I suggest you embed the post in concrete, trowel a peak around the post so water runs off, and don't let the PT post come in contact with the ground.

How heavy is 6x6 post?

Table of Pressure-Treated Lumber WeightsWeight of Pressure-Treated Lumber4 x 143.5 x 13.2523.514 x 163.5 inch x 15.25 inch27.06 lbs6 x 65.5 x 5.515.336 x 85.5 x 7.2520.2052 more rows

How do I keep my 6x6 from rotting?

Applying a seal or stain to your wooden fence can help provide an additional level of protection against rot. You can choose to use a water repellent sealant to your wood to help keep rot-causing moisture out from your fences.26-Jul-2019

How strong are 6x6 posts?

If you assume a conservative 1400psi allowable bending stress, a single 6x6 with 12' span can support about 2000 lbs. So your double 6x6 can support at least 4000 lbs (possibly more if you do a good job bonding the two members together so that there's no slip between the faces).17-Oct-2012

How do I attach a beam to a 6x6 post?

3:336:00Options for Fastening Beams to Deck Posts - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can drive some through bolts all the way through the holes that are provided. That will giveMoreYou can drive some through bolts all the way through the holes that are provided. That will give some additional support. You would just look at the load tables for the piece of hardware.

Do I need 4x4 or 6x6 posts?

While there may be a handful of circumstances that only require the minimum 4×4 deck post, you will more than likely want to choose a 6×6 post for the deck. It provides more stability for larger decks, the ability to hold a heavier load, and more room for notching.06-Sept-2021

How long will a pressure treated 6x6 last?

The life span of pressure treated wood ranges from 9 to 40-years or more depending on where and how it is being used. The type of exposure, treatment, and whether it's incised or not are other factors that affect treated wood.

How do you anchor a 6x6 post to concrete?

0:4212:256X6 concealed post bracket, Simpson Strong-tie CPT66Z - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday today we're gonna work on these 6x6 posts the ones that I put the all thread in the concrete IMoreToday today we're gonna work on these 6x6 posts the ones that I put the all thread in the concrete I drill out some holes and use this Simpson Strong Tie s et - 3G it's an epoxy adhesive two-part.

Will pressure treated wood rot in concrete?

Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. ... This allows any moisture that gets between the concrete and the bottom of the post to percolate through the gravel and away from the bottom of the post.23-Apr-2013

How deep should a fence post be in the ground?

But normally posts have to be set at 1/3 of their length in the ground.

How tall can a privacy fence be?

Privacy fences normally restricted to maximum allowed height which typically 6’ (1.8 m). But there are might be some exceptions. If the purpose of a fence is to protect the property from animals, serve as a security barrier or help to absorb the noise from a street traffic city can issue a permit for building other than standard size fence unless it will contradict with other city laws.

What do you need to know when building a pergola?

Basically it is like building a room outside without any walls. This means you need to figure out the desired height, length and width.

How big is a standard pergola?

There are usually a few ways to put these together as well based on how you want the pergola to look in the long run. The standard size is about 13 feet by 19 feet in total.

Do pergolas need squares?

That gives a large range of options, especially since they do not even need to be squares if that is not the desired aesthetic. Additionally, just because these are the common sizes of a pergola does not mean you are unable to create something different. There are limitless custom options for specific spaces.

What is the difference between wood and vinyl?

Vinyl – Vinyl is quite inexpensive while still retaining a high quality and appearance. Wood – Just a standard treated pine wood can be used in a lot of situations, this gives a natural look and is usually pretty sturdy. Wood does deteriorate over time though. Visit this gallery page to see more pergola ideas.

How big should a pergola post be?

The standard size is about 13 feet by 19 feet in total. This size typically refers to the size of the rafters that go along the top of the pergola. The posts are recommended to be about 1 foot and 6 inches in from the end of the rafters. This makes the post to post dimensions about 10 feet by 16 feet, which is about the size you will get to use.

How long should a pergola rafter be?

Even the material can change the sizes of the rafters. Typically the rafters could be 2 inches by 6 inches, 2 inches by 8 inches, or 1.5 inches by 7.25 inches. The length of the rafters be as long as you desire the pergola itself to be.

How wide should a pergola be?

The diameter of the holes should be no less than 10 inches wide, with larger 6″ posts requiring 12″. Some pergolas are attached to an existing structure, meaning there will be less posts, and a lot of the weight is taken off due to the attachment to the home or outbuilding. The posts do still need to be weight bearing.

Can you replumb a fence post after a wind storm?

If the fence tilts after a windstorm, you can replumb the fence posts with minimal effort by digging out some of the stone on the one side of the post .

Can livestock rub against fence posts?

Farmers and ranchers typically set their fence posts in compacted soil, and it's not uncommon for livestock to rub against their fence posts. You can also switch to larger fenceposts to see if that helps. The only issue I can see is a 6x6 post might not look right and could appear to be too massive.

How to soften 6x6 posts?

You can soften the appearance of the 6x6 posts by clipping each of the four corners at a 45-degree angle. This requires you to put them through a table saw or use a circular saw to make these modest cuts. Try doing this on a short piece of 6x6 post to see if you like the look.

Is Douglas Fir strong?

Cedar posts, while very attractive, are not as strong as you might think.

Alternative to 6"x6" treated lumber for 10' and 12' in ground posts ?

I have a 40x72 pole barn, 20x72 currently has an upstairs. I want to extend that upstairs portion out to the full 40x72.

I'm in the process now of setting poles for a car park

I have a 40x72 pole barn, 20x72 currently has an upstairs. I want to extend that upstairs portion out to the full 40x72.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9