Receiving Helpdesk

what kind of glue do you use on cpvc pipe

by Luther Feil MD Published 3 years ago Updated 2 years ago

When it comes to residential hot and cold plumbing systems, contractors prefer solvent cement because it's reliable and is easy to do, saving time and money. Simply following the instructions below, anyone—contractor or homeowner—can effectively assemble a CPVC piping system.Apr 16, 2019

Full Answer

What type of glue can I use on CPVC piping?

Types of PVC Pipe Glue

  • PVC (Polyvinyl Chloride) Cement. This cement is made for PVC piping that falls under 40 and 80 schedules. ...
  • Color-Coded PVC Cement. When you are shopping for PVC cement, you might notice that products are labeled in various colors. ...
  • ABS (Acrylonitrile Butadiene Styrene) Cement. ...
  • Transition Cement. ...
  • CPVC (Chlorinated Polyvinyl Chloride) Cement. ...

What should be used for cutting PVC/CPVC pipe?

What to Cut a CPVC Pipe With?

  • Saws. For years the primary CPVC cutting tool has been a fine toothed saw. ...
  • Tube Cutters. The method preferred by plumbers is to use a circular tubing cutter with a plastic cutting blade. ...
  • Ratchet Cutters. Ratchet cutters are also quick and easy, but you have to be careful. ...
  • Power Tools. ...

How to connect PVC pipe without glue?

How To Connect PVC Pipe Without Glue? [5 Different Ways] Method 1 of 5: Inner Tubing. Step 1: Cut Off The Tubing. Step 2: Stretch The Tape Over The Pipe. Method 2 of 5: Gorilla-Tape Strip. Step 1: Cut The Tape. Step 2: Fit On The Inner Rim. Step 3: Push To Fit. Method 3 of 5: Threaded Pipes.

What kind of glue is needed for PVC plumbing pipes?

Use the Proper Solvent for Each Type of Plastic

  • Note:There are three common types of plastic plumbing pipe: PVC, CPVC and ABS. For a reliable seal, you have to use the solvent that's formulated for the pipe. ...
  • White or beige pipes (PVC and CPVC) also require a primer.
  • You don't need a PVC primer with black ABS pipe.
  • Read the label to match the solvent cement to the type of pipe you're using. ...

Is it OK to use PVC glue on CPVC?

When working with CPVC piping, use multipurpose PVC/CPVC glue or a CPVC glue; glue made specifically for PVC will not hold properly on CPVC and could lead to leaks or breakage. CPVC pipes can withstand hot water temperatures up to 180 degrees F. Cut the CPVC pipe to size with a fine tooth saw.Sep 26, 2017

What is the best glue for CPVC?

Oatey® CPVC Medium Bodied Fast Set Orange Cement is recommended for cold water systems and hot water systems up to 200°F / 93°C. It is approved for Corzan® CPVC piping systems. Its medium body has excellent gap filling properties and is easy to apply.

How do you glue CPVC pipe together?

1:352:53How to cut and glue CPVC pipe - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo it's easy to remember you just glue them together and you twist it about a quarter of a turn andMoreSo it's easy to remember you just glue them together and you twist it about a quarter of a turn and you're gonna hold it for 10 to 15 seconds. They recommend on the can for 30 seconds.

Is there a special glue for CPVC?

There is no special “CPVC to PVC glue,” so chemically joining CPVC and PVC requires solvent cement and primer that are strong enough to fully bond CPVC pipe.Oct 17, 2017

Do I have to use primer on CPVC?

Primer is needed to prepare the bonding area for the addition of cement and subsequent assembly. Use a proper applicator, such as a dauber, swab or paintbrush, approximately half the size of the pipe diameter.Dec 18, 2018

Can you use Gorilla Glue on CPVC pipe?

Gorilla Glue can be used from 32 to 140° F. It is environmentally friendly and cleans up with water. The amazing thing about this glue is that it will work on all kinds of pipes, from the smallest PVC pipe up to a 6" diameter pipe. The glue itself is as strong as the pipe, ensuring a secure, durable connection.

Should I use Teflon tape on CPVC fittings?

Securing the Threads TFE (Teflon®) thread tape is always safe for making CPVC threaded connections. Some paste-type sealants contain solvents that may be damaging to CPVC. If the use of a paste or pipe dope is preferred, only thread sealants that are included in the The FBCTM System Compatible Program.

What is CPVC primer?

PVC and CPVC solvent cement and primer are used to create bonds between pipe, valves, and fittings. Some industries may refer to these products as PVC piping glue. Primer is applied first to clean and soften the material, then the cement is applied and the parts are joined together.

What color is CPVC glue?

CPVC cement is either yellow or orange, depending on the brand of pipe.Nov 11, 2010

What Color is CPVC Glue?

CPVC glue comes in a variety of colors. Orange is the most common color, followed by yellow/gold. This differs slightly from PVC cement, which is more often blue, although both can be found in gray.

Best Glue For CPVC

While most CPVC glues will work well, we recommend going with Oatey CPVC orange cement and Oatey purple primer. Oatey has the most CPVC products with the highest reviews on Amazon. Amazon also offers a great deal on this primer/glue set from Oatey to get you started.

Is PVC Primer Necessary to Paint PVC and UPVC?

It is a good idea to use a primer when painting PVC and uPVC, especially if you don’t have paints made to adhere to plastic. However, it isn’t required.

Where to apply glue to a pipe?

Tip #1 Apply the glue to both sides inside the fitting hub and on the outer surface of the pipe end.

Does gold glue need primer?

There is essentially no difference in the performance of either type, but the gold glue will save you a little time. “It doesn’t require a primer,” says Beall, “the orange glue does.”

Is there a difference between gold glue and gold glue?

There is essentially no difference in the performance of either type, but the gold glue will save you a little time.

How to use PVC cement?

The most important thing to remember about using PVC cement is that the way you use it will have the biggest effect on how it performs. Always clean and deburr your PVC pipe before applying primer, then cement. Work quickly to avoid drying. The cement only works when it’s wet.

How long to hold PVC cement together?

Work quickly using the cement, and hold together each joint you glue for 30 seconds. You should be good to go.

How long does it take cement to work on plastic?

Work quickly to avoid drying. The cement only works when it’s wet. After inserting pipe into fittings give it a quarter turn and hold the pieces together for 30 seconds before moving on to the next piece. This gives the cement time to work its magic on the plastic.

How to apply PVC primer?

Apply primer to the outside of the pipe and the inside of the fitting evenly, with no clumps. Immediately after, when the primer is still wet, apply cement to the same surfaces. Be generous with the cement, as the primary reason for joint failure is insufficient cement coverage. The video below (via Christy Enterprises) shows, in greater detail, how to apply PVC primer and cement.

What is PVC cement primer?

Primer acts as a cleaner, preparing the pipe by softening it's surface and removing any glaze that may be present. People often buy colored primer, as plumbing code sometimes requires visual proof of primer use. PVC cement is often referred to as "glue," but it works in a very different way.

What kind of material are you using?

The first step to ensuring you use the correct adhesive is to correctly identify your pipe and fittings material. PVC is generally white, whereas CPVC is usually light gray or cream colored, and CPVC CTS is a tanish/yellow color. If you are still not certain after looking at the color of the pipes, PVC, CPVC, and CPVC CTS pipes all come with the technical specifications printed on them.

How to make slip connections?

Slip connections are easy to make, as all you need is a simple push to make a connection! These types of connections can be made permanent by using PVC primer and cement, two substances that go hand-in-hand. Threaded connections are made with sealant tape or thread sealant ("pipe dope") which create a tight seal between threads. PVC pipe adhesives for threaded connections allow the user to unscrew the connection if desired. It is important to pick the right adhesive for the job.

What is thread seal tape?

Most DIY-ers use thread seal tape, which is usually made from PTFE (Teflon), due to how easy and clean it is. All you need to do is wrap it around the male threads. A stronger yet messier option is joint compound, also called pipe dope. Joint compound is a liquid solution that fills up any gaps in threads to totally prevent leakage. It never fully dries, so the joint can be unscrewed at any time.

What is PVC sizing?

The PVC sizing system is designed in a way that prevents most slipping from occurring, but this does not mean the seal between a pipe and fitting is air (or even water) tight. Whether you are making a plumbing/irrigation system or simply building a structure out of PVC pipe, adhesives can help! There are many types of PVC pipe adhesives, ...

What is PVC cement?

PVC cement is often referred to as "glue," but it works in a very different way. This substance actually breaks down and chemically bonds two PVC parts together. In effect, PVC cement makes two PVC parts inseparable. PVC primer and cement are easy to apply and will set in minutes!

How big of a pipe does PVC glue work on?

The amazing thing about this glue is that it will work on all kinds of pipes, from the smallest PVC pipe up to a 6" diameter pipe. The glue itself is as strong as the pipe, ensuring a secure, durable connection.

What is the difference between PVC and PVC?

Also, what is the difference between PVC CPVC pipe? The main difference between CPVC and PVC is the range of temperatures each is capable of withstanding. CPVC can handle temperatures up to 200° Fahrenheit, while PVC peaks at 140° Fahrenheit. PVC comes in nominal pipe sizes only , while CPVC is available in both nominal pipe sizes ...

Can you use solvent cement on PVC pipe?

A: Yes. CPVC solvent cement technically will work on PVC piping. However, we recommend that the correct Weld-On primer and PVC solvent cement for the particular application should be used. Please note that PVC solvent cement, because of temperature limitations, is not recommended for CPVC piping. Click to see full answer.

Is polyvinyl chloride toxic?

When heated, PVC products can produce HCL fumes, which are toxic to humans.

Do you need primer for CPVC?

Besides, does CPVC need primer? There are a few specialty PVC and CPVC cements which do not require the pipe / fittings to be primed before the cementing process, but you still must check with your local municipality to see if they require priming the pipe and fittings first. Remember to never use primer on or with ABS products.

What cement is used for PVC pipe?

Be aware that one type of pipe cement you may see on the shelf is designed for CPVC (chlorinated polyvinyl chloride) pipe, which is similar in name but not an acceptable substitute. Popular manufacturers of PVC cement include Weld-On ( view on Amazon ), Oatey ( view on Amazon ), Gorilla ( view on Amazon) and more.

What is PVC pipe?

Pipe made of polyvinyl chloride, commonly called PVC, is used in a variety of residential applications, from plumbing systems to a host of cool craft projects (such as DIY racks, organizers, and even furniture). Joining a pipe to a pipe fitting requires specially formulated primer and cement—no ordinary adhesive but a chemical solvent ...

What to do after cutting PVC pipe?

After you cut the PVC pipe with a special tool called a PVC pipe cutter ( view example on Amazon ), be sure to smooth any burrs off the edges of the cut surface with coarse sandpaper or a utility knife. Left attached, burrs can both catch debris flowing through the pipes, causing clogs, or compromise the effectiveness of the seal.

How long does it take to put cement on PVC pipe?

The process involves applying primer to the outside of the pipe and the inside of the fitting, which cleans and preps the PVC. After about 10 seconds, you next apply cement to the same areas, then insert the pipe snugly into the fitting and allow the cement to set. Simple as that sounds, gluing PVC pipe is easy to mess up, ...

How to get a pipe to pop out?

Twist the pipe a quarter of the way around as you push it into the fitting. This will allow the glue to spread, offering a tighter fit. Hold the pipe and fitting together firmly for at least 30 seconds; any less and the pipe could pop back out.

How long does it take for glue to cure?

Refer to the product’s instructions for how long the glue needs to cure before you can use it for your project, usually within 24 hours. Advertisement.

Can you lay a tarp over PVC pipe?

You may want to lay a tarp or towel over your work surface to minimize difficult cleanup in the event of drips. PVC pipe cement is a chemical solvent which can off-put harmful toxins, so be sure to work in a well-ventilated area. Photo: istockphoto.com.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9