- SAE 10W30 Automotive Oil. A substitute for outboard tilt-trim oil is automotive oil with SAE 10W30 specification. ...
- Transmission Fluid Type F. Transmission fluid type F is a substitute that can be used for outboard motor tilt-and-trim oil. ...
- Dextron ATF. Dextron ATF is a good substitute for outboard tilt and trim oil, especially since the tilt-trim unit is a hydraulic system.
- SAE 5W or 10W. Use SAE5W or SAE10W instead of quicksilver fluid for Mercruiser trim pumps. Other substitutes to quicksilver include chainsaw oil and sewing machine oil.
- Old Remedies. In the 1970s, 30 weight nondetergent motor oil was used as a substitute for outboard motor tilt-and-trim oil.
What can I use instead of tilt and trim fluid?
In this way, what can I use for tilt and trim fluid? Dextron ATF is a good substitute for outboard tilt and trim oil, especially since the tilt-trim unit is a hydraulic system. As a substitute, Penzoil company has a marine tilt-and-trim hydraulic fluid that can be used for power steering and tilt-and-trim systems.
What kind of fluid do you use for trim on a boat?
As a substitute, Penzoil company has a marine tilt-and-trim hydraulic fluid that can be used for power steering and tilt-and-trim systems. Also, how do you manually trim an inboard motor?
What is a good substitute for outboard motor tilt-and-trim oil?
Transmission fluid type F is a substitute that can be used for outboard motor tilt-and-trim oil. Automatic transmission fluid has a high amount of detergent in it, so be sure to check your owner's manual. Dextron ATF is a good substitute for outboard tilt and trim oil, especially since the tilt-trim unit is a hydraulic system.
What is a substitute for Quicksilver fluid in a MerCruiser trim pump?
Use SAE5W or SAE10W instead of quicksilver fluid for Mercruiser trim pumps. Other substitutes to quicksilver include chainsaw oil and sewing machine oil. Do not use automatic transmission fluid (ATF) for Mercruiser trim pumps, because the material used for the seals on its trim pump system is not compatible with either ATF or brake fluid.
What kind of oil goes in tilt trim?
What is the difference between trim and tilt on a boat?
About this website
What kind of fluid do you use for tilt and trim?
Be sure to use a high-quality marine-formula grease, like Yamalube® Marine Grease, so it won't wash off so fast.
Can I use power steering fluid in my power trim?
You will be fine. If there is any change in the speed of the the tabs, that will be short lived until the fluids gets all mixed together. Chances are you won't notice any difference. ATF and power steering are pretty close in viscosity, 30wt motor oil is way more viscous.
What kind of fluid do you put in a trim motor?
Dextron ATF is a good substitute for outboard tilt and trim oil, especially since the tilt-trim unit is a hydraulic system. As a substitute, Penzoil company has a marine tilt-and-trim hydraulic fluid that can be used for power steering and tilt-and-trim systems.
What is a substitute for tilt and trim fluid?
I would recommend any Dexron type ATF. Dexron was originally formulated to work in GM's turbohydramatic line of transmissions. GM has admitted that their transmissions can be run on any transmission fluid in an emergency as well as straight hydraulic oil and power steering fluid if necessary.
What can I use for trim fluid?
You can use ATF or any 5 wt hydraulic fluid. i went to a local yamaha dealer last year when i was doing my service and the parts person told me to just refill with a good atf. haven't had any problems so far. same with my sea-star steering.
Is hydraulic steering fluid the same as power steering fluid?
A lot of people ask, “Is power steering fluid the same as transmission fluid?” While ATF and power steering fluid are both hydraulic fluids, ATF features different modifiers and detergents that are specifically designed to remove dirt and grease from the transmission system.
How do you add oil to tilt trim?
0:075:46How to add or refill your Trim and tilt fluid on an outboard. - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe fill screw you're gonna want to use a big flat head screwdriver the bigger the better becauseMoreThe fill screw you're gonna want to use a big flat head screwdriver the bigger the better because you don't want to damage it to be damaged it can be really tough on something like this big flat head.
How do you bleed a tilt trim motor?
6:4010:23Power Trim and Tilt Refill | STEP BY STEP - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo essentially what we're gonna do is using the hydraulic trim button we're gonna lower the motor.MoreSo essentially what we're gonna do is using the hydraulic trim button we're gonna lower the motor. Wait for a couple minutes let some air start bleeding out into this reservoir.
How do you fill a Mercruiser trim pump?
Items you will need Turn the fill screw on the top-right side of the trim pump tank counterclockwise with a flathead screwdriver. Pour hydraulic fluid into the tank until the level reaches the "Full" line. Replace the fill screw.
Can you use ATF for trim pump?
No problem "at all" Using ATF in your trim pump. Only reason they say that you can use ATF in a pinch is that they cannot sell you trim fluid for 10 times the price!
Can I use hydraulic fluid for tilt and trim?
Your tractor fluid will work just fine. Hydraulic fluid varies a little bit in foaming characteristics, but that is not an issue in a tilt and trim.
How do you bleed a Mercury trim?
Use the power trim control switch to raise your motor. Engage the tilt support lock. Remove the fill cap for the power trim reservoir an ensure that the fluid level reaches the bottom of the fill hole. If it does not, add power trim and steering fluid until it does so.
approved substitute for yamaha tilt and trim fluid | Boating Forum ...
Re: approved substitute for yamaha tilt and trim fluid Robert, Thanks for the quick response. The tilt and trim I have is from an '07 90tlr. I was going to replace the upper seals on the tilt cylinder since I developed a little seep and wanted to make sure.
Power trim/tilt hydraulic fluid - Barnacle Bill's Marine Supply
I believe the answer is yes, but I’d wait for another comment before moving on that. _____ 2005 90hp I3 - Model E 90 DP L SO R - S erial 05083190 - 1972 18ft Starcraft Holiday
Adding fluid to Trim & Tilt on 2013 Evinrude 90 hp Etec
I read an earlier post on here saying to run the Tilt and Trim up and down and then raise it and wait 10 minutes to let air escape. Then add more fluid. I have raised my motor all the way up and waited up to as much as an hour and I cannot add any more fluid. I loosen the fill screw and fluid...
What fluid is used for power tilt?
For the power tilt and trim the recommended fluid is Quicksilver power trim and steering fluid #92-90100A12. If unavailable use 10W-30 or 10W-40 motor oil. I'm not aware of any white fluid, you need to make sure that you don't have any leaks letting water in and turning the oil a milky white.
What is power trim?
Power trim means you can adjust motor at full throttle. You can buy motors with just power tilt. Then, can you use power steering fluid for boat trim? Does this mean that automotive pwr steering fluid can be used in trim pumps They both seem to be about the same viscosity. The trim pump works off a fluid.
Do OB tilt units self bleed?
Bleeding: OB tilt/trim units are "self-bleeding" and you should always perform these "purge cycles" to follow even if you don't need to add any more fluid. To purge/check, remove the tilt lock (if engaged) and cycle the OB down by "jogging" it down, in 2-3 seconds runs.
What is tilt-trim oil?
Outboard tilt-trim oil provides rust protection for engines in the marine industry. For long periods of time, marine engines function under high loads and rotations per minute (RPMs), which causes automotive oils to break down and lose viscosity or ease of flow.
What is a good substitute for outboard tilt and trim oil?
Dextron ATF is a good substitute for outboard tilt and trim oil, especially since the tilt-trim unit is a hydraulic system. As a substitute, Penzoil company has a marine tilt-and-trim hydraulic fluid that can be used for power steering and tilt-and-trim systems.
What is the best oil to use for a Mercruiser trim pump?
Use SAE5W or SAE10W instead of quicksilver fluid for Mercruiser trim pumps. Other substitutes to quicksilver include chainsaw oil and sewing machine oil. Do not use automatic transmission fluid (ATF) for Mercruiser trim pumps, because the material used for the seals on its trim pump system is not compatible with either ATF or brake fluid.
What type of transmission fluid is used for outboard motors?
Transmission fluid type F is a substitute that can be used for outboard motor tilt-and-trim oil. Automatic transmission fluid has a high amount of detergent in it, so be sure to check your owner's manual.
What was used as a substitute for outboard motor oil in the 1970s?
In the 1970s, 30 weight nondetergent motor oil was used as a substitute for outboard motor tilt-and-trim oil.
What kind of oil goes in tilt trim?
What kind of fluid goes in tilt trim? For the power tilt and trim the recommended fluid is Quicksilver power trim and steering fluid #92-90100A12. If unavailable use 10W-30 or 10W-40 motor oil.
What is the difference between trim and tilt on a boat?
The difference between tilt and trim on a boat is referencing the location of the outboard or the drive of the inboard. Trimming is used when underway and goes about 20 degrees of the way up and tilting is coming all the way up for storage.