What does a solid white line on the road mean?
These solid white lines running along the edge of the road indicate the “shoulder” of the road and let you know that — if the line is on your right side — you’re headed in the same direction as traffic. Both sides will be white if a yellow line is present in the center of the road.
Is it legal to cross a solid white line?
“Yes, you would legally be able to cross the solid white line and continue northbound into the through lanes. The solid white line is indicating the exit-only lane.” So, crossing the gore point or shoulder solid white is a no-no. Crossing other solid whites is OK, per Prouty.
What does a broken white line mean?
A dashed or broken white line indicates lanes of a road where there are no overtaking restrictions and the road is not considered to have any unusual or dangerous features. Rural road showing a broken white centre line and a solid white edge line. On standard roads these lines are 100mm wide, 3m long and have a 7m gap between them.
What does 2 Solid white lines mean?
You can cross a continuous white edge line and travel for up to 100m when you are:
- entering or leaving a single lane road
- turning at an intersection from a single lane road
- stopping at the side of a road—unless signs or markings say not to.
What is the white line on the right side of the road called?
The solid white line on the right side is called the 'fog line' used to help cars stay in their lane during foggy conditions and help pedestrians stay off the road.
What does the white line on the side of the road mean?
White lines are usually on the road surface and tell you something about the road that you are travelling on. Lines that travel along the road (longitudinal) inform and warn drivers of approaching situations that will need them to do something - like turn right, or do not cross.
What does the white line indicate?
Explanation: A continuous white line is used on many roads to indicate the edge of the carriageway. This can be useful when visibility is restricted. The line is discontinued at junctions, lay-bys, and entrances to or exits from private drives.
Can you drive on hatched markings?
Hatched markings: These road markings can be found mainly on dual carriageways and motorways, and are mainly used to help protect traffic from turning right or to separate traffic lanes. If the marking is bordered by a solid white line then you are not permitted to enter it unless it is an emergency.May 12, 2017
What does a white line on a road mean?
A thick solid white line at the side of the road is used to indicate its edge. A centre line is a broken into mid-sized pieces and marks the middle of the road. When you see this type of line it indicates that there is a hazard ahead.
Why are there white chevrons on the road?
Chevrons painted on the road have white diagonal stripes and they are used to separate traffic lanes or to protect traffic turning right. If the area has a broken white line border then you should not enter the area unless it is safe and necessary to do so.
What does a double row of short lines mean?
A double row of thicker short lines can be seen on a major road indicating that you need to give way they can also be used at mini-roundabouts’: At a ‘standard’ roundabout you will see a thinner row of broken white lines telling you that you must give way to traffic from the right:
When the line nearest to you is sold, must you not cross it?
When the line nearest to you is sold you must not cross it unless you are turning onto a side road or other location and it is safe to do so. If necessary you may cross when the road is clear to pass stationary vehicles, bicycles, horses or road maintenance vehicles if they are travelling at 10 mph or less.
What does a mini roundabout look like?
At a mini-roundabout you will also need to give way to traffic from the right. This will be noted by a thicker broken white line and looks like this: Lines running alongside or parallel to the road you are travelling on have different meanings. A thick solid white line at the side of the road is used to indicate its edge.
What do the yellow lines on pavement mean?
Pavement markings such as solid yellow lines and painted symbols are used to divide lanes, as well as indicate when it’s legal to pass, safe for changing lanes, turn, and when you have to stop.
What is edge line?
Edge lines are solid pavement lines along the side of the road. They indicate where the lane ends and where the road shoulder begins. There are two types of edge lines: A solid white edge line – indicates the right edge of the pavement.
What is a diamond lane?
Diamond Symbols / HOV Lanes. Diamond symbols are used to indicate special purpose lanes, such as lanes reserved for High Occupancy Vehicles (HOV). Unless you comply with the requirements of the HOV lane, you must not drive in a lane with diamond pavement symbols. HOV lanes are restricted traffic lanes where only vehicles with a certain number ...
What is a HOV lanes?
HOV lanes are restricted traffic lanes where only vehicles with a certain number of occupants (usually 2 or more) are allowed to use. Some vehicles like buses, motorcycles, and low-emission vehicles are exceptions to the rule and can use the HOV lanes at any time. There may also be restrictions at certain times of the day and day of the week.
Do you have to cross a single white line?
You must not cross single solid white lines unless to avoid a hazard. Many drivers fail to obey this at traffic light intersections, which creates a dangerous situation for everyone.
Can you drive in one direction with an arrow?
Arrows may have more than one direction: one direction – only drive in the designated direction. two directions – you may drive in either direction. Place yourself in the correct lane well in advance of an arrow so you don’t have to make last-minute lane changes.
Can you cross a yellow line?
A Solid Yellow Line Alongside a Broken Yellow Line. Depending on which side you are on, you may or may not be allowed to pass. If you are traveling on the right of the broken yellow line, you are allowed to cross the lines to pass vehicles, if safe. If you are traveling on the side of the solid yellow line, you must not pass.
What does the white line on the road mean?
A white line separates lanes of traffic moving in the same direction. The dashed lines indicate that you are free to change lanes and stay in that other lane. Photo: The News Wheel.
What does it mean when there are two yellow lines in the center of the road?
If there are two solid yellow lines, this means you are not allowed to pass the car in front of you by crossing into oncoming traffic.
What does a zigzag line mean?
Zigzag white line on side of road. It’s a rare sight in the USA, but if you come across zigzag white lines here or abroad, this means you should not park your car on that area of the road. If you part your car on a berm with zigzag road lines, you will get ticketed or towed.
What does a dashed yellow line mean?
If the yellow line is dashed, this means that you are free to pass a slow or stopped car by crossing onto the other side of the road if the coast is clear. A single dashed yellow line indicates that passing is allowed from either direction.
What does solid line mean on a highway?
However, if the line is solid, this indicates that you should not change lanes. These are often used in construction areas to discourage drivers from moving around too much, on highway exits to distinguish a separating lane, and to distinguish carpool lanes from the regular flow of traffic. Photo: The News Wheel.
What does a yellow line on the left mean?
Yellow line on left of road. If a solid yellow line runs along the left-hand shoulder of the road instead of a white line, that means the road is divided. Instead of the opposing direction of traffic being adjacent to your lane on the same strip of pavement, there is a median dividing the road, splitting it into two non-touching halves.
Can you pass if you have a solid yellow line?
If both the dashed and solid yellow lines are present, passing is only allowed by one direction of traffic. If the line on your side of the road is solid, you should not pass, even if the other side is dashed. Only the dashed side of the road can pass.
Where is the single white line?
Single white line at the edge of the carriageway, other than at junctions, a single white line exits on private drives and lay-bys. Used on the left-hand side of the road and alongside the central reservation of dual carriageway roads.
What is a centre broken white line?
Centre broken white line on a single carriageway road. This line is used to provide a visual divide between both carriageways traveling in opposing directions. Many roads use this dividing line although certain roads such as quiet residential back-roads or some rural roads and lanes may have no markings at all. Lane line.
What is a zig zag line?
Zig zag road lines. Zig zag road lines in the UK are either white or yellow. Although they are placed to inform motorists of similar rules, white zig zag lines are placed in different locations to yellow and can be enforced by different authorities resulting in varying penalties and fines.
Why are bus lane markings important?
Bus lane road markings are used to inform drivers when they may turn into a bus lane or when they should be avoided . Many motorists are fined each year due to entering bus lanes when it is prohibited. The bus lane road markings section helps those taking the theory test.
What is a cycle lane?
Cycle lanes and cyclist boxes are designed to keep a safe distance between motorists and cyclists. The cycle lanes section offers a guide to all motorists to the meaning of road markings surrounding cycle lanes and how to correctly deal with cycle boxes. See also cycle lane road signs
What is a single yellow line?
Single yellow line road markings are put in place to inform motorists that part-time parking restrictions are in force. Restrictions are based either on a certain road or within a controlled parking zone. The single yellow line section explains who can park, under what circumstances and when.
What is a hatched road marking?
These hatched road markings are used for a reduction in lanes. The solid white line forms a continuous boundary prohibiting vehicles from entering except on an emergency. See hatched road markings for further information.
What are markings on a road?
In roads paved with setts (like in Belgian/Italian or Portuguese styles) or cobblestones, markings can be made with white blocks or stones, like marble or other light-coloured rocks. This kind of marking is long lasting, but could be slippery in rain or wet conditions unless surfaced with a matte or rough finish.
What is a road surface marking?
Road surface marking is any kind of device or material that is used on a road surface in order to convey official information; they are commonly placed with road marking machines (or road marking equipment, pavement marking equipment ).
How long does white paint last?
In warm climate areas, the thermoplastic markings can last three to six years. However, snowplows can damage the thermoplastics which would limit the usage in the cold climate areas.
How is paint applied to a roadway?
Paint is run through a series of hoses under air pressure and applied to the roadway surface along with the application of glass beads for retroreflectivity. After application, the paint dries fairly quickly. Sometimes the glass beads are mixed in with the paint and applied together, which is not a recommended method.
What is pigment yellow 10?
Pigment Yellow 10 is a common yellow colourant used for road marking on U.S. highways.
What is reflective marker?
Reflective markers are used as travel lane dividers, to mark the central reservation (median) or to mark exit slip-roads. Incorporating a raised retro-reflective element, they are typically more visible at night and in inclement weather than standard road marking lines.
Which provinces have road markings?
Other provinces with road marking test areas include Quebec, New Brunswick, and Nova Scotia. Quebec's is outside of Montreal on Autoroute 40; in New Brunswick, the area is outside of Fredericton on Highway 2; Nova Scotia's test area is north of Halifax on Highway 102.
What do the white and yellow lines on the DMV signify?
When you see white and yellow lines separate travel lanes or mark the center of the road, they tell you if traffic is traveling in one or two directions.
What does it mean when a road has yellow lines?
Yellow Lines. On a road with yellow lines in the center of the road, traffic travels in opposite directions. You are on a two-way roadway and must drive to the right of these lines. If there is a single solid yellow line painted on the left edge, you are traveling on a divided highway or a one-way street.
What is a special lane use signal?
Special lane-use control signals show you if you can use a reversible lane or not. Pavement markings in a reversible lane consists of a normal broken double yellow line on each side of the lane.
What is a normal white line?
A normal or wide double white line – prohibits crossing. Dotted white lane lines separate a through lane from deceleration or acceleration lane, or a through lane that becomes a mandatory exit or turn lane. A normal broken white line separates lanes where you are permitted to change lanes.
What is the line on the right side of a divider?
There is usually one on each side of the divider. The right edge of the roadway is marked with a normal solid white line (edge line). Remember: if there is a yellow line is on your right and a white line on your left, you are going the wrong way. A yellow (center) line must always be on your left!
What does a yellow line on the side of a lane mean?
A center lane with a normal broken yellow line and a normal solid yellow line on each side indicate a two-way left-turn lane. This lane is used by traffic in either direction as part of a left-turn maneuver.
What does a solid yellow line mean?
Two normal solid yellow lines mean that traffic from either direction is prohibited from passing. If you travel on an undivided two-way roadway with four or more lanes, the center of the road is marked with a solid double yellow line. Don’t drive to the left of the center, unless you must cross the lines to turn left.
